The remote Fedora 23 host has a package installed that is affected by multiple vulnerabilities as referenced in the FEDORA-2015-14213 advisory.

    Security fix for CVE-2015-5146, CVE-2015-5194, CVE-2015-5219, CVE-2015-5195, CVE-2015-5196

Tenable has extracted the preceding description block directly from the Fedora security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The version of the remote NTP server is 3.x or 4.x prior to 4.2.8p3.
It is, therefore, affected by the following vulnerability :

  - ntpd in ntp before 4.2.8p3 with remote configuration enabled     allows remote authenticated users with knowledge of the     configuration password and access to a computer entrusted to     perform remote configuration to cause a denial of service     (service crash) via a NULL byte in a crafted configuration     directive packet. (CVE-2015-1798)

The remote Fedora 21 host has a package installed that is affected by multiple vulnerabilities as referenced in the FEDORA-2015-77bfbc1bcd advisory.

    Security fix for CVE-2015-7704, CVE-2015-5300, CVE-2015-7692, CVE-2015-7871, CVE-2015-7702, CVE-2015-7691,     CVE-2015-7852, CVE-2015-7701

    ----

    Security fix for CVE-2015-5146, CVE-2015-5194, CVE-2015-5219, CVE-2015-5195, CVE-2015-5196

Tenable has extracted the preceding description block directly from the Fedora security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to the versions of the ntp packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - NTP through 4.2.8p12 has a NULL Pointer     Dereference.(CVE-2019-8936)

  - ntpd in ntp 4.2.8p4 before 4.2.8p11 drops bad packets     before updating the 'received' timestamp, which allows     remote attackers to cause a denial of service     (disruption) by sending a packet with a zero-origin     timestamp causing the association to reset and setting     the contents of the packet as the most recent     timestamp. This issue is a result of an incomplete fix     for CVE-2015-7704.(CVE-2018-7184)

  - Buffer overflow in the decodearr function in ntpq in     ntp 4.2.8p6 through 4.2.8p10 allows remote attackers to     execute arbitrary code by leveraging an ntpq query and     sending a response with a crafted array.(CVE-2018-7183)

  - NTP before 4.2.8p6 and 4.3.x before 4.3.90, when     configured in broadcast mode, allows man-in-the-middle     attackers to conduct replay attacks by sniffing the     network.(CVE-2015-7973)

  - ntpd in ntp before 4.2.8p3 with remote configuration     enabled allows remote authenticated users with     knowledge of the configuration password and access to a     computer entrusted to perform remote configuration to     cause a denial of service (service crash) via a NULL     byte in a crafted configuration directive     packet.(CVE-2015-5146)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Several vulnerabilities were discovered in the Network Time Protocol daemon and utility programs :

  - CVE-2015-5146     A flaw was found in the way ntpd processed certain     remote configuration packets. An attacker could use a     specially crafted package to cause ntpd to crash if :

    - ntpd enabled remote configuration
    - The attacker had the knowledge of the configuration       password

    - The attacker had access to a computer entrusted to       perform remote configuration

      Note that remote configuration is disabled by default       in NTP.

  - CVE-2015-5194     It was found that ntpd could crash due to an     uninitialized variable when processing malformed     logconfig configuration commands.

  - CVE-2015-5195     It was found that ntpd exits with a segmentation fault     when a statistics type that was not enabled during     compilation (e.g. timingstats) is referenced by the     statistics or filegen configuration command.

  - CVE-2015-5219     It was discovered that sntp program would hang in an     infinite loop when a crafted NTP packet was received,     related to the conversion of the precision value in the     packet to double.

  - CVE-2015-5300     It was found that ntpd did not correctly implement the
    -g option :

  Normally, ntpd exits with a message to the system log if the offset   exceeds the panic threshold, which is 1000 s by default. This option   allows the time to be set to any value without restriction; however,   this can happen only once. If the threshold is exceeded after that,   ntpd will exit with a message to the system log. This option can be   used with the -q and -x options.

  ntpd could actually step the clock multiple times by more than the   panic threshold if its clock discipline doesn't have enough time to   reach the sync state and stay there for at least one update. If a   man-in-the-middle attacker can control the NTP traffic since ntpd   was started (or maybe up to 15-30 minutes after that), they can   prevent the client from reaching the sync state and force it to step   its clock by any amount any number of times, which can be used by   attackers to expire certificates, etc.

  This is contrary to what the documentation says. Normally, the   assumption is that an MITM attacker can step the clock more than the   panic threshold only once when ntpd starts and to make a larger   adjustment the attacker has to divide it into multiple smaller   steps, each taking 15 minutes, which is slow.

  - CVE-2015-7691, CVE-2015-7692, CVE-2015-7702     It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in ntp_crypto.c, where a packet with particular     autokey operations that contained malicious data was not     always being completely validated. Receipt of these     packets can cause ntpd to crash.

  - CVE-2015-7701     A memory leak flaw was found in ntpd's CRYPTO_ASSOC. If     ntpd is configured to use autokey authentication, an     attacker could send packets to ntpd that would, after     several days of ongoing attack, cause it to run out of     memory.

  - CVE-2015-7703     Miroslav Lichvar of Red Hat found that the :config     command can be used to set the pidfile and driftfile     paths without any restrictions. A remote attacker could     use this flaw to overwrite a file on the file system     with a file containing the pid of the ntpd process     (immediately) or the current estimated drift of the     system clock (in hourly intervals). For example :

  ntpq -c ':config pidfile /tmp/ntp.pid'ntpq -c ':config driftfile   /tmp/ntp.drift'

  In Debian ntpd is configured to drop root privileges, which limits   the impact of this issue.

  - CVE-2015-7704     If ntpd as an NTP client receives a Kiss-of-Death (KoD)     packet from the server to reduce its polling rate, it     doesn't check if the originate timestamp in the reply     matches the transmit timestamp from its request. An     off-path attacker can send a crafted KoD packet to the     client, which will increase the client's polling     interval to a large value and effectively disable     synchronization with the server.

  - CVE-2015-7850     An exploitable denial of service vulnerability exists in     the remote configuration functionality of the Network     Time Protocol. A specially crafted configuration file     could cause an endless loop resulting in a denial of     service. An attacker could provide a malicious     configuration file to trigger this vulnerability.

  - CVE-2015-7852     A potential off by one vulnerability exists in the     cookedprint functionality of ntpq. A specially crafted     buffer could cause a buffer overflow potentially     resulting in null byte being written out of bounds.

  - CVE-2015-7855     It was found that NTP's decodenetnum() would abort with     an assertion failure when processing a mode 6 or mode 7     packet containing an unusually long data value where a     network address was expected. This could allow an     authenticated attacker to crash ntpd.

  - CVE-2015-7871     An error handling logic error exists within ntpd that     manifests due to improper error condition handling     associated with certain crypto-NAK packets. An     unauthenticated, off-path attacker can force ntpd     processes on targeted servers to peer with time sources     of the attacker's choosing by transmitting symmetric     active crypto-NAK packets to ntpd. This attack bypasses     the authentication typically required to establish a     peer association and allows an attacker to make     arbitrary changes to system time.

The remote host is affected by the vulnerability described in GLSA-201509-01 (NTP: Multiple vulnerablities)

    Multiple vulnerabilities have been discovered in NTP. Please review the       CVE identifiers referenced below for details.
  Impact :

    A remote attacker could possibly execute arbitrary code with the       privileges of the process, or cause a Denial of Service condition.
  Workaround :

    There is no known workaround at this time.

ID	名稱	產品	系列	已發布	已更新	嚴重性
86027	Fedora 23 : ntp (2015-14213)	Nessus	Fedora Local Security Checks	2015/9/21	2025/8/29	high
121310	Network Time Protocol Daemon (ntpd) 3.x / 4.x < 4.2.8p3 Denial Of Service Vulnerability	Nessus	Misc.	2019/1/22	2025/3/21	medium
89288	Fedora 21 : ntp (2015-77bfbc1bcd)	Nessus	Fedora Local Security Checks	2016/3/4	2025/8/29	critical
135619	EulerOS Virtualization 3.0.2.2 : ntp (EulerOS-SA-2020-1457)	Nessus	Huawei Local Security Checks	2020/4/16	2024/3/15	critical
86682	Debian DSA-3388-1 : ntp - security update	Nessus	Debian Local Security Checks	2015/11/2	2021/1/11	critical
86132	GLSA-201509-01 : NTP: Multiple vulnerablities	Nessus	Gentoo Local Security Checks	2015/9/25	2021/1/11	medium

偵測

搜尋 Plugin

high

medium

critical

critical

critical

medium