The remote Oracle Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2025-13602 advisory.

    - net/sched: Always pass notifications when child class becomes empty (CKI Backport Bot) [RHEL-93387]     {CVE-2025-38350}
    - sch_htb: make htb_deactivate() idempotent (CKI Backport Bot) [RHEL-93387] {CVE-2025-38350}
    - codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog() (CKI Backport Bot) [RHEL-93387]     {CVE-2025-38350}
    - sch_qfq: make qfq_qlen_notify() idempotent (CKI Backport Bot) [RHEL-93387] {CVE-2025-38350}
    - sch_drr: make drr_qlen_notify() idempotent (CKI Backport Bot) [RHEL-93387] {CVE-2025-38350}
    - sch_htb: make htb_qlen_notify() idempotent (CKI Backport Bot) [RHEL-93387] {CVE-2025-38350}
    - wifi: ath12k: fix invalid access to memory (CKI Backport Bot) [RHEL-103219] {CVE-2025-38292}

Tenable has extracted the preceding description block directly from the Oracle Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

遠端 CentOS Linux 9 主機已安裝受到多個弱點影響的套件如 kernel-5.14.0-604.el9 版本變更記錄中所提及。

  - 已解決 Linux 核心中的下列弱點：idpf: fix adapter NULL pointer dereference on reboot With SRIOV enabled, idpf ends up calling into idpf_remove() twice. First via idpf_shutdown() and then again when idpf_remove() calls into sriov_disable(), because the VF devices use the idpf driver, hence the same remove routine. When that happens, it is possible for the adapter to be NULL from the first call to idpf_remove(), leading to a NULL pointer dereference. echo 1 > /sys/class/net/<netif>/device/sriov_numvfs reboot BUG: kernel NULL pointer dereference, address:
    0000000000000020 ... RIP: 0010:idpf_remove+0x22/0x1f0 [idpf] ... ? idpf_remove+0x22/0x1f0 [idpf] ? idpf_remove+0x1e4/0x1f0 [idpf] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19f/0x200 pci_stop_bus_device+0x6d/0x90 pci_stop_and_remove_bus_device+0x12/0x20 pci_iov_remove_virtfn+0xbe/0x120 sriov_disable+0x34/0xe0 idpf_sriov_configure+0x58/0x140 [idpf] idpf_remove+0x1b9/0x1f0 [idpf] idpf_shutdown+0x12/0x30 [idpf] pci_device_shutdown+0x35/0x60 device_shutdown+0x156/0x200 ... Replace the direct idpf_remove() call in idpf_shutdown() with idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform the bulk of the cleanup, such as stopping the init task, freeing IRQs, destroying the vports and freeing the mailbox. This avoids the calls to sriov_disable() in addition to a small netdev cleanup, and destroying workqueues, which don't seem to be required on shutdown. (CVE-2025-22065)

  - 已解決 Linux 核心中的下列弱點：idpf: convert workqueues to unbound When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`. (CVE-2024-58057)

  - 已解決 Linux 核心中的下列弱點：idpf: fix checksums set in idpf_rx_rsc() idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds.
    DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712]
    __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ?
    __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) (CVE-2025-21890)

  - 已解決 Linux 核心中的下列弱點：idpf: check error for register_netdev() on init Current init logic ignores the error code from register_netdev(), which will cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829] pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add local variables for idx, vport_config and netdev for readability. (CVE-2025-22116)

  - 已解決 Linux 核心中的下列弱點：idpf: fix null-ptr-deref in idpf_features_check idpf_features_check is used to validate the TX packet. skb header length is compared with the hardware supported value received from the device control plane. The value is stored in the adapter structure and to access it, vport pointer is used. During reset all the vports are released and the vport pointer that the netdev private structure points to is NULL. To avoid null-ptr-deref, store the max header length value in netdev private structure. This also helps to cache the value and avoid accessing adapter pointer in hot path. BUG: kernel NULL pointer dereference, address: 0000000000000068 ...
    RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x154/0x520 ? exc_page_fault+0x76/0x190 ? asm_exc_page_fault+0x26/0x30 ? idpf_features_check+0x6d/0xe0 [idpf] netif_skb_features+0x88/0x310 validate_xmit_skb+0x2a/0x2b0 validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x19d/0x3a0 __dev_queue_xmit+0xb74/0xe70 ...
    (CVE-2025-38053)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

リモートの CentOS Linux 9 ホストには、kernel-5.14.0-604.el9 ビルド変更ログで言及されているように、複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: idpf: fix adapter NULL pointer dereference on reboot With SRIOV enabled, idpf ends up calling into idpf_remove() twice. First via idpf_shutdown() and then again when idpf_remove() calls into sriov_disable(), because the VF devices use the idpf driver, hence the same remove routine. When that happens, it is possible for the adapter to be NULL from the first call to idpf_remove(), leading to a NULL pointer dereference. echo 1 > /sys/class/net/<netif>/device/sriov_numvfs reboot BUG: kernel NULL pointer dereference, address:
    0000000000000020 ... RIP: 0010:idpf_remove+0x22/0x1f0 [idpf] ... ? idpf_remove+0x22/0x1f0 [idpf] ? idpf_remove+0x1e4/0x1f0 [idpf] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19f/0x200 pci_stop_bus_device+0x6d/0x90 pci_stop_and_remove_bus_device+0x12/0x20 pci_iov_remove_virtfn+0xbe/0x120 sriov_disable+0x34/0xe0 idpf_sriov_configure+0x58/0x140 [idpf] idpf_remove+0x1b9/0x1f0 [idpf] idpf_shutdown+0x12/0x30 [idpf] pci_device_shutdown+0x35/0x60 device_shutdown+0x156/0x200 ... Replace the direct idpf_remove() call in idpf_shutdown() with idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform the bulk of the cleanup, such as stopping the init task, freeing IRQs, destroying the vports and freeing the mailbox. This avoids the calls to sriov_disable() in addition to a small netdev cleanup, and destroying workqueues, which don't seem to be required on shutdown. (CVE-2025-22065)

  - Linux カーネルでは、以下の脆弱性が解決されています: idpf: convert workqueues to unbound When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`. (CVE-2024-58057)

  - Linux カーネルでは、以下の脆弱性が解決されています: idpf: fix checksums set in idpf_rx_rsc() idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds.
    DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712]
    __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ?
    __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) (CVE-2025-21890)

  - Linux カーネルでは、以下の脆弱性が解決されています: idpf: check error for register_netdev() on init Current init logic ignores the error code from register_netdev(), which will cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829] pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add local variables for idx, vport_config and netdev for readability. (CVE-2025-22116)

  - Linux カーネルでは、以下の脆弱性が解決されています: idpf: fix null-ptr-deref in idpf_features_check idpf_features_check is used to validate the TX packet. skb header length is compared with the hardware supported value received from the device control plane. The value is stored in the adapter structure and to access it, vport pointer is used. During reset all the vports are released and the vport pointer that the netdev private structure points to is NULL. To avoid null-ptr-deref, store the max header length value in netdev private structure. This also helps to cache the value and avoid accessing adapter pointer in hot path. BUG: kernel NULL pointer dereference, address: 0000000000000068 ...
    RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x154/0x520 ? exc_page_fault+0x76/0x190 ? asm_exc_page_fault+0x26/0x30 ? idpf_features_check+0x6d/0xe0 [idpf] netif_skb_features+0x88/0x310 validate_xmit_skb+0x2a/0x2b0 validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x19d/0x3a0 __dev_queue_xmit+0xb74/0xe70 ...
    (CVE-2025-38053)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

远程 CentOS Linux 9 主机上存在安装的程序包该程序包受到 kernel-5.14.0-604.el9 版本变更日志中提及的多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：idpf: fix adapter NULL pointer dereference on reboot With SRIOV enabled, idpf ends up calling into idpf_remove() twice. First via idpf_shutdown() and then again when idpf_remove() calls into sriov_disable(), because the VF devices use the idpf driver, hence the same remove routine. When that happens, it is possible for the adapter to be NULL from the first call to idpf_remove(), leading to a NULL pointer dereference. echo 1 > /sys/class/net/<netif>/device/sriov_numvfs reboot BUG: kernel NULL pointer dereference, address:
    0000000000000020 ... RIP: 0010:idpf_remove+0x22/0x1f0 [idpf] ... ? idpf_remove+0x22/0x1f0 [idpf] ? idpf_remove+0x1e4/0x1f0 [idpf] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19f/0x200 pci_stop_bus_device+0x6d/0x90 pci_stop_and_remove_bus_device+0x12/0x20 pci_iov_remove_virtfn+0xbe/0x120 sriov_disable+0x34/0xe0 idpf_sriov_configure+0x58/0x140 [idpf] idpf_remove+0x1b9/0x1f0 [idpf] idpf_shutdown+0x12/0x30 [idpf] pci_device_shutdown+0x35/0x60 device_shutdown+0x156/0x200 ... Replace the direct idpf_remove() call in idpf_shutdown() with idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform the bulk of the cleanup, such as stopping the init task, freeing IRQs, destroying the vports and freeing the mailbox. This avoids the calls to sriov_disable() in addition to a small netdev cleanup, and destroying workqueues, which don't seem to be required on shutdown. (CVE-2025-22065)

  - 已修复 Linux 内核中的下列漏洞：idpf: convert workqueues to unbound When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`. (CVE-2024-58057)

  - 已修复 Linux 内核中的下列漏洞：idpf: fix checksums set in idpf_rx_rsc() idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds.
    DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712]
    __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ?
    __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) (CVE-2025-21890)

  - 已修复 Linux 内核中的下列漏洞：idpf: check error for register_netdev() on init Current init logic ignores the error code from register_netdev(), which will cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829] pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add local variables for idx, vport_config and netdev for readability. (CVE-2025-22116)

  - 已修复 Linux 内核中的下列漏洞：idpf: fix null-ptr-deref in idpf_features_check idpf_features_check is used to validate the TX packet. skb header length is compared with the hardware supported value received from the device control plane. The value is stored in the adapter structure and to access it, vport pointer is used. During reset all the vports are released and the vport pointer that the netdev private structure points to is NULL. To avoid null-ptr-deref, store the max header length value in netdev private structure. This also helps to cache the value and avoid accessing adapter pointer in hot path. BUG: kernel NULL pointer dereference, address: 0000000000000068 ...
    RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x154/0x520 ? exc_page_fault+0x76/0x190 ? asm_exc_page_fault+0x26/0x30 ? idpf_features_check+0x6d/0xe0 [idpf] netif_skb_features+0x88/0x310 validate_xmit_skb+0x2a/0x2b0 validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x19d/0x3a0 __dev_queue_xmit+0xb74/0xe70 ...
    (CVE-2025-38053)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

The remote CentOS Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the kernel-5.14.0-604.el9 build changelog.

  - In the Linux kernel, the following vulnerability has been resolved: idpf: fix adapter NULL pointer     dereference on reboot With SRIOV enabled, idpf ends up calling into idpf_remove() twice. First via     idpf_shutdown() and then again when idpf_remove() calls into sriov_disable(), because the VF devices use     the idpf driver, hence the same remove routine. When that happens, it is possible for the adapter to be     NULL from the first call to idpf_remove(), leading to a NULL pointer dereference. echo 1 >     /sys/class/net/<netif>/device/sriov_numvfs reboot BUG: kernel NULL pointer dereference, address:
    0000000000000020 ... RIP: 0010:idpf_remove+0x22/0x1f0 [idpf] ... ? idpf_remove+0x22/0x1f0 [idpf] ?     idpf_remove+0x1e4/0x1f0 [idpf] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19f/0x200     pci_stop_bus_device+0x6d/0x90 pci_stop_and_remove_bus_device+0x12/0x20 pci_iov_remove_virtfn+0xbe/0x120     sriov_disable+0x34/0xe0 idpf_sriov_configure+0x58/0x140 [idpf] idpf_remove+0x1b9/0x1f0 [idpf]     idpf_shutdown+0x12/0x30 [idpf] pci_device_shutdown+0x35/0x60 device_shutdown+0x156/0x200 ... Replace the     direct idpf_remove() call in idpf_shutdown() with idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which     perform the bulk of the cleanup, such as stopping the init task, freeing IRQs, destroying the vports and     freeing the mailbox. This avoids the calls to sriov_disable() in addition to a small netdev cleanup, and     destroying workqueues, which don't seem to be required on shutdown. (CVE-2025-22065)

  - In the Linux kernel, the following vulnerability has been resolved: idpf: convert workqueues to unbound     When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose     host workers are not bound to any specific CPU. In the default configuration (i.e. when     `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows     the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this     solution potentially sacrifices locality, it avoids contention with other processes that might dominate     the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a     particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5%     of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large     completion delays as a result, causing performance degradation, timeouts and eventual system crash. * I     have also run a manual test to gauge the performance improvement. The test consists of an antagonist     process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset     01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20     ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to     `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events     are collected. Without the current patch, the antagonist process can force arbitrary delays between     `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the     current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and,     keeping everything else equal, the maximum delay I could see was `6us`. (CVE-2024-58057)

  - In the Linux kernel, the following vulnerability has been resolved: idpf: fix checksums set in     idpf_rx_rsc() idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This     triggers the following warning for CONFIG_DEBUG_NET=y builds.
    DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at     ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629]     Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common     intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd     libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648]     Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll     (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [     69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug     (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op     (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [     69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [     69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ?     idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712]
    __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ?
    __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84     arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) (CVE-2025-21890)

  - In the Linux kernel, the following vulnerability has been resolved: idpf: check error for     register_netdev() on init Current init logic ignores the error code from register_netdev(), which will     cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the     creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512     unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [     3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [     3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [     3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [     3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829]     pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On     removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add     local variables for idx, vport_config and netdev for readability. (CVE-2025-22116)

  - In the Linux kernel, the following vulnerability has been resolved: idpf: fix null-ptr-deref in     idpf_features_check idpf_features_check is used to validate the TX packet. skb header length is compared     with the hardware supported value received from the device control plane. The value is stored in the     adapter structure and to access it, vport pointer is used. During reset all the vports are released and     the vport pointer that the netdev private structure points to is NULL. To avoid null-ptr-deref, store the     max header length value in netdev private structure. This also helps to cache the value and avoid     accessing adapter pointer in hot path. BUG: kernel NULL pointer dereference, address: 0000000000000068 ...
    RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf] Call Trace: <TASK> ? __die+0x23/0x70 ?     page_fault_oops+0x154/0x520 ? exc_page_fault+0x76/0x190 ? asm_exc_page_fault+0x26/0x30 ?     idpf_features_check+0x6d/0xe0 [idpf] netif_skb_features+0x88/0x310 validate_xmit_skb+0x2a/0x2b0     validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x19d/0x3a0 __dev_queue_xmit+0xb74/0xe70 ...
    (CVE-2025-38053)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

Linux/Unix 主机中安装的一个或多个程序包受到一个漏洞影响，而供应商没有提供补丁程序。

  - wifiath12k修复对内存的无效访问。在 ath12k_dp_rx_msdu_coalesce() 中rxcb 是从 skb 中提取以及布尔值 is_continuation 是 rxcb 的一部分。目前在释放 skb 后会再次访问 rxcb->is_continuation这是错误的因为内存已释放。这可能导致释放后使用错误。
    因此请通过在本地定义来自 rxcb 的 bool is_continuation 来修复 以便在释放 skb 之后可以使用 is_continuation。仅测试编译文件。(CVE-2025-38292)

请注意，Nessus 依赖供应商报告的程序包是否存在进行判断。

Linux/Unix ホストには、ベンダーが提供するパッチが利用できない脆弱性の影響を受ける複数のパッケージがインストールされています。

  - wifiath12kメモリへの無効なアクセスを修正します ath12k_dp_rx_msdu_coalesce() では、rxcb は skb からフェッチされ、ブール値 is_continuation は rxcb の一部です。現在は、skb を解放した後、rxcb->is_continuation が再びアクセスされました。これは、メモリが既に解放されているため間違っています。これにより、use-after-free エラーが発生する可能性があります。
    したがって、rxcb から bool is_continuation をローカルで定義することで を修正し、skb 解放後 is_continuation が使用できるようにします。テスト済みのみをコンパイルします。(CVE-2025-38292)

Nessus は、ベンダーによって報告されたパッケージの存在に依存していることに注意してください。

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - wifi: ath12k: fix invalid access to memory In ath12k_dp_rx_msdu_coalesce(), rxcb is fetched from skb and     boolean is_continuation is part of rxcb. Currently, after freeing the skb, the rxcb->is_continuation     accessed again which is wrong since the memory is already freed. This might lead use-after-free error.
    Hence, fix by locally defining bool is_continuation from rxcb, so that after freeing skb, is_continuation     can be used. Compile tested only. (CVE-2025-38292)

Note that Nessus relies on the presence of the package as reported by the vendor.

The remote Redhat Enterprise Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2025:13602 advisory.

    The kernel packages contain the Linux kernel, the core of any Linux operating system.

    The kernel packages contain the Linux kernel, the core of any Linux operating system.

    Security Fix(es):

    The kernel packages contain the Linux kernel, the core of any Linux operating system.

    The kernel packages contain the Linux kernel, the core of any Linux operating system.

    Security Fix(es):

    * kernel: crypto: algif_hash - fix double free in hash_accept (CVE-2025-38079)

    The kernel packages contain the Linux kernel, the core of any Linux operating system.

    The kernel packages contain the Linux kernel, the core of any Linux operating system.

    Security Fix(es):

    The kernel packages contain the Linux kernel, the core of any Linux operating system.

    The kernel packages contain the Linux kernel, the core of any Linux operating system.

    Security Fix(es):

    * kernel: crypto: algif_hash - fix double free in hash_accept (CVE-2025-38079)

    * kernel: wifi: ath12k: fix invalid access to memory (CVE-2025-38292)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且供應商未提供可用的修補程式。

  - wifiath12k修正無效的記憶體存取。在 ath12k_dp_rx_msdu_coalesce() 中rxcb 從 skb 擷取而布林值 is_continuation 是 rxcb 的一部分。目前在釋放 skb 之後rxcb->is_continuation 會再次存取這是錯誤的因為記憶體已經釋放。這可能導致釋放後使用錯誤。
    因此透過從 rxcb 在本機定義 bool is_continuation 來修正以便在釋放 skb 之後可以使用 is_continuation。僅測試編譯檔案。(CVE-2025-38292)

請注意，Nessus 依賴供應商報告的套件存在。

ID	名稱	產品	系列	已發布	已更新	嚴重性
249324	Oracle Linux 9 : kernel (ELSA-2025-13602)	Nessus	Oracle Linux Local Security Checks	2025/8/14	2025/8/14	high
249174	CentOS 9kernel-5.14.0-604.el9	Nessus	CentOS Local Security Checks	2025/8/12	2025/8/12	medium
249174	CentOS 9kernel-5.14.0-604.el9	Nessus	CentOS Local Security Checks	2025/8/12	2025/8/12	medium
249174	CentOS 9kernel-5.14.0-604.el9	Nessus	CentOS Local Security Checks	2025/8/12	2025/8/12	medium
249174	CentOS 9 : kernel-5.14.0-604.el9	Nessus	CentOS Local Security Checks	2025/8/12	2025/8/12	medium
247031	Linux Distros 未修补的漏洞：CVE-2025-38292	Nessus	Misc.	2025/8/9	2025/8/9	high
247832	RHEL 10kernelRHSA-2025:13598	Nessus	Red Hat Local Security Checks	2025/8/11	2025/8/11	high
247031	Linux Distros のパッチ未適用の脆弱性: CVE-2025-38292	Nessus	Misc.	2025/8/9	2025/8/9	high
247832	RHEL 10カーネルRHSA-2025:13598	Nessus	Red Hat Local Security Checks	2025/8/11	2025/8/11	high
247031	Linux Distros Unpatched Vulnerability : CVE-2025-38292	Nessus	Misc.	2025/8/9	2025/8/9	high
247832	RHEL 10 : kernel (RHSA-2025:13598)	Nessus	Red Hat Local Security Checks	2025/8/11	2025/8/11	high
248465	RHEL 9 : kernel (RHSA-2025:13602)	Nessus	Red Hat Local Security Checks	2025/8/12	2025/8/12	high
247031	Linux Distros 未修補的弱點：CVE-2025-38292	Nessus	Misc.	2025/8/9	2025/8/9	high
247832	RHEL 10核心 (RHSA-2025:13598)	Nessus	Red Hat Local Security Checks	2025/8/11	2025/8/11	high

偵測

搜尋 Plugin

high

medium

medium

medium

medium

high

high

high

high

high

high

high

high

high