CentOS Linux 8 [TuxCare] 安全性更新：bpftool / kernel / kernel-core / kernel-cross-headers / etc多個漏洞 （CENTOS-STREAM8：CLSA-2026：1793362651）
high Nessus Plugin ID 374204
語言:
概要
CentOS Linux 主機缺少一個或多個安全性更新。說明
CentOS Linux 8 主機已安裝的套件受到 TuxCare CENTOS-STREAM8：CLSA-2026：1793362651 公告中提及的多個弱點影響。- 已解決 Linux 核心中的下列弱點：gfs2: fix use-after-free in gfs2_qd_dealloc gfs2_qd_dealloc(), called as an RCU callback from gfs2_qd_dispose(), accesses the superblock object sdp through qd->qd_sbd after freeing qd. It does so to decrement sd_quota_count and wake up sd_kill_wait. However, by the time the RCU callback runs, gfs2_put_super() may have already freed sdp via free_sbd(). This can happen when gfs2_quota_cleanup() is called during unmount: it disposes of quota objects via call_rcu() and then waits on sd_kill_wait with a 60-second timeout. If the timeout expires, or if gfs2_gl_hash_clear() triggers additional qd_put() calls that schedule more RCU callbacks after the wait completes, gfs2_put_super() will proceed to free the superblock while RCU callbacks referencing it are still pending. Add an rcu_barrier() before free_sbd() in gfs2_put_super() to ensure all pending RCU callbacks (including gfs2_qd_dealloc) have completed before the superblock is freed. (CVE-2026-63804)
- 已解決 Linux 核心中的下列弱點：usb: typec: tcpm: Validate SVID index in svdm_consume_modes() In svdm_consume_modes(), the SVID value is read from pmdata->svids using pmdata->svid_index as an array index without bounds validation: paltmode->svid = pmdata->svids[pmdata->svid_index]; If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data is embedded inside struct tcpm_port, indexing past svids reads into adjacent fields. In particular: - At index 16, it reads the altmodes count. - At index 18 and beyond, it reads into altmode_desc[], which contains partner-supplied SVDM Discovery Modes VDOs. By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index to 20, the partner can force paltmode->svid to be loaded with an arbitrary, partner- chosen SVID, which is then registered via typec_partner_register_altmode(). Fix this by validating that pmdata->svid_index is non-negative and strictly less than pmdata->nsvids before accessing the pmdata->svids array inside svdm_consume_modes(). (CVE-2026-64330)
- 已解決 Linux 核心中的下列弱點：drm/amdkfd: hold event_mutex while checkpointing CRIU events kfd_criu_checkpoint_events() counts the entries in p->event_idr via kfd_get_num_events(), allocates an array sized to that count, and then walks the same IDR to fill it.
Neither the count nor the walk holds p->event_mutex. The CRIU checkpoint caller holds only p->mutex. Event create and destroy (kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not take p->mutex, so a second thread in the same process can insert or remove events between the count and the walk. If an event is inserted, the walk iterates more entries than were counted and writes past the end of the ev_privs allocation; if an event is removed, the walk dereferences an entry that is being freed. Hold p->event_mutex across the count and the walk so both observe a consistent view of p->event_idr. The lock is released before copy_to_user(), which only touches the local buffer. The caller already holds p->mutex and the create/destroy paths never take p->mutex, so the p->mutex -> p->event_mutex order is not inverted and no deadlock is introduced. (cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) (CVE-2026-74446)
- 已解決 Linux 核心中的下列弱點：net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. But the UAF can be triggered with a custom application using uAPI: BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653) Read of size 8 at addr ffff88810d152650 by task meter/2508 Call Trace: ovs_meter_execute (net/openvswitch/meter.c:653) do_execute_actions (net/openvswitch/actions.c:1407) ovs_execute_actions (net/openvswitch/actions.c:1584) ovs_packet_cmd_execute (net/openvswitch/datapath.c:703) ... netlink_sendmsg (af_netlink.c:1900) Allocated by task 2519: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) ovs_meter_cmd_set (net/openvswitch/meter.c:422) ... netlink_sendmsg (af_netlink.c:1900) Freed by task 2519: kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) ovs_meter_cmd_set (net/openvswitch/meter.c:479) ...
netlink_sendmsg (af_netlink.c:1900) Fix that by making sure attach_meter() doesn't make the meter visible until all the checks are done and the function can't fail anymore. This also makes sure the hash value is calculated after the potential re-sizing of the table. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642. (CVE-2026-74465)
- 已解決 Linux 核心中的下列弱點：mm/page_reporting: use system_freezable_wq to fix UAF during suspend During PM freeze (e.g. S3 suspend or S4 hibernation), device drivers like virtio_balloon reset their underlying virtio devices and delete their virtqueues via vdev->config->del_vqs(). However, page reporting work (page_reporting_process) was scheduled on the global system_wq. Because system_wq lacks the WQ_FREEZABLE flag, the PM freezer skips it, leaving page_reporting_process active during suspend. If pages are freed into the buddy allocator while suspending (for example, when core MM invokes the balloon shrinker during S4 hibernation image saving), page reporting triggers virtballoon_free_page_report() on deleted virtqueues, resulting in a Use-After-Free / General Protection Fault: [ 196.795226] general protection fault, probably for non-canonical address 0xaa1436fe70dae6df: 0000 [#1] SMP NOPTI [ 196.825967] Workqueue: events page_reporting_process [196.831038] RIP: 0010:virtqueue_add_split+0x233/0x4c0 [virtio_ring] [ 196.927073] virtballoon_free_page_report+0x3a/0xe0 [virtio_balloon] [ 196.946943] page_reporting_process+0x370/0x4f0 Fix this by switching page reporting work to system_freezable_wq. This ensures that the PM freezer pauses page_reporting_process before device drivers destroy their reporting virtqueues. Because the reporting worker is frozen, memory reclamation/freeing (e.g. via shrinker execution) can safely return pages to MM during freeze without triggering unfrozen reporting work on deleted virtqueues. This aligns with the driver's existing design. The comment in virtballoon_freeze() states: /* * The workqueue is already frozen by the PM core before this * function is called. */ Testing: I have verified these fixes using Google's virtualization infrastructure by running continuous suspend/resume iterations (40+ cycles) while churning memory using stress-ng (`stress-ng --vm 4 --vm-bytes 60% --timeout 1`) to constantly create free pages for the buddy allocator. We also set the `page_reporting_order` parameter to 0 to make the page reporting worker highly sensitive, forcing it to pick up any 4K free pages. This confirmed that the UAF crashes are no longer reproducible. (CVE-2026-74481)
請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。
解決方案
根據 TuxCare 公告 CENTOS-STREAM8：CLSA-2026：1793362651 中的指引更新受影響的套件。另請參閱
Plugin 詳細資訊
嚴重性: High
ID: 374204
檔案名稱: tuxcare_centos_8_CLSA-2026-1793362651.nasl
版本: 1.1
類型: Local
代理程式: unix
已發布: 2026/10/30
已更新: 2026/10/30
支援的感應器: Nessus Agent, Continuous Assessment, Tenable Cloud Security, Tenable Self-Hosted Container Security, Nessus
風險資訊
VPR
風險因素: High
分數: 7.9
百分位數: 99.32
Vendor
Vendor Severity: Important
CVSS v2
風險因素: Medium
基本分數: 6.8
時間性分數: 5.3
媒介: CVSS2#AV:L/AC:L/Au:S/C:C/I:C/A:C
CVSS 評分資料來源: CVE-2026-64330
CVSS v3
風險因素: High
基本分數: 7.8
時間性分數: 7
媒介: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
時間媒介: CVSS:3.0/E:P/RL:O/RC:C
弱點資訊
必要的 KB 項目: Host/local_checks_enabled, Host/CentOS/release, Host/CentOS/rpm-list, Host/OS/extended-third-party
可被惡意程式利用: true
可輕鬆利用: Exploits are available
修補程式發佈日期: 2026/10/30
弱點發布日期: 2026/7/8
參考資訊
CVE: CVE-2026-63804, CVE-2026-64330, CVE-2026-74446, CVE-2026-74465, CVE-2026-74481, CVE-2026-80613, CVE-2026-89482, CVE-2026-89533, CVE-2026-89653, CVE-2026-90067, CVE-2026-93830, CVE-2026-97517, CVE-2026-98432, CVE-2026-98573, CVE-2026-98588, CVE-2026-98602, CVE-2026-98606, CVE-2026-98687, CVE-2026-98739, CVE-2026-99082
CLSA: 2026:1793362651