Rocky Linux 9.6 主機已安裝的套件會受到 TuxCare ALMALINUX9.6：CLSA-2026：1783091784 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：net: bcmgenet: Use stronger register read/writes to assure ordering GCC12 appears to be much smarter about its dependency tracking and is aware that the relaxed variants are just normal loads and stores and this is causing problems like: [210.074549] ------------[ cut here ]------------ [ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet):
    transmit queue 1 timed out [ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240 [ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat] [ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110 [ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58 [ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters [210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022 [ 210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [210.161358] pc : dev_watchdog+0x234/0x240 [ 210.161364] lr : dev_watchdog+0x234/0x240 [ 210.161368] sp :
    ffff8000080a3a40 [ 210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20 [210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08 [ 210.212321] x23:
    0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000 [ 210.219491] x20: 0000000000000001 x19:
    ffff55b1426884c8 x18: ffffffffffffffff [ 210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15:
    6d736e617274203a [ 210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0 [210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c [ 210.248171] x8 :
    00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000 [ 210.255341] x5 : 0000000000000000 x4 :
    0000000000000000 x3 : 0000000000001000 [ 210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 :
    0000000000000044 [ 210.269682] Call trace: [ 210.272133] dev_watchdog+0x234/0x240 [ 210.275811] call_timer_fn+0x3c/0x15c [ 210.279489] __run_timers.part.0+0x288/0x310 [ 210.283777] run_timer_softirq+0x48/0x80 [ 210.287716] __do_softirq+0x128/0x360 [ 210.291392]
    __irq_exit_rcu+0x138/0x140 [ 210.295243] irq_exit_rcu+0x1c/0x30 [ 210.298745] el1_interrupt+0x38/0x54 [210.302334] el1h_64_irq_handler+0x18/0x24 [ 210.306445] el1h_64_irq+0x7c/0x80 [ 210.309857] arch_cpu_idle+0x18/0x2c [ 210.313445] default_idle_call+0x4c/0x140 [ 210.317470] cpuidle_idle_call+0x14c/0x1a0 [ 210.321584] do_idle+0xb0/0x100 [ 210.324737] cpu_startup_entry+0x30/0x8c [210.328675] secondary_start_kernel+0xe4/0x110 [ 210.333138] __secondary_switched+0x94/0x98 The assumption when these were relaxed seems to be that device memory would be mapped non reordering, and that other constructs (spinlocks/etc) would provide the barriers to assure that packet data and in memory rings/queues were ordered with respect to device register reads/writes. This itself seems a bit sketchy, but the real problem with GCC12 is that it is moving the actual reads/writes around at will as though they were independent operations when in truth they are not, but the compiler can't know that. When looking at the assembly dumps for many of these routines its possible to see very clean, but not strictly in program order operations occurring as the compiler would be free to do if these weren't actually register reads/write operations. Its possible to suppress the timeout with a liberal bit of dma_mb()'s sprinkled around but the device still seems unable to reliably send/receive data. A better plan is to use the safer readl/writel everywhere. Since this partially reverts an older commit, which notes the use of the relaxed variants for performance reasons. I would suggest that any performance problems ---truncated--- (CVE-2022-49194)

  - 已解決 Linux 核心中的下列弱點：can: isotp: sanitize CAN ID checks in isotp_bind() Syzbot created an environment that lead to a state machine status that can not be reached with a compliant CAN ID address configuration. The provided address information consisted of CAN ID 0x6000001 and 0xC28001 which both boil down to 11 bit CAN IDs 0x001 in sending and receiving. Sanitize the SFF/EFF CAN ID values before performing the address checks. (CVE-2022-49269)

  - 已解決 Linux 核心中的下列弱點：net/smc: Reset connection when trying to use SMCRv2 fails. We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It can be reproduced by: - smc_run nginx - smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port> BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000)
    - not-present page PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42 Workqueue:
    smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc] RSP:
    0018:ffffb8294b2d7c78 EFLAGS: 00010a06 RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000 RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00 RBP: ffffb8294b2d7db8 R08:
    ffff8f1815c5860c R09: 0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180 R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2:
    0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib] ? smcr_buf_map_link+0x24b/0x290 [smc] ?
    __smc_buf_create+0x4ee/0x9b0 [smc] smc_clc_send_accept+0x4c/0xb0 [smc] smc_listen_work+0x346/0x650 [smc] ?
    __schedule+0x279/0x820 process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ?
    __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> During the CLC handshake, server sequentially tries available SMCRv2 and SMCRv1 devices in smc_listen_work(). If an SMCRv2 device is found. SMCv2 based link group and link will be assigned to the connection. Then assumed that some buffer assignment errors happen later in the CLC handshake, such as RMB registration failure, server will give up SMCRv2 and try SMCRv1 device instead. But the resources assigned to the connection won't be reset. When server tries SMCRv1 device, the connection creation process will be executed again. Since conn->lnk has been assigned when trying SMCRv2, it will not be set to the correct SMCRv1 link in smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to correct SMCRv1 link group but conn->lnk points to the SMCRv2 link mistakenly. Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx] will be accessed. Since the link->link_idx is not correct, the related MR may not have been initialized, so crash happens. | Try SMCRv2 device first | |-> conn->lgr: assign existed SMCRv2 link group; | |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC); | |-> sndbuf & RMB creation fails, quit; | | Try SMCRv1 device then | |-> conn->lgr:
    create SMCRv1 link group and assign; | |-> conn->link: keep SMCRv2 link mistakenly; | |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0] | initialized. | | Then smc_clc_send_confirm_accept() accesses | conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash. v This patch tries to fix this by cleaning conn->lnk before assigning link. In addition, it is better to reset the connection and clean the resources assigned if trying SMCRv2 failed in buffer creation or registration. (CVE-2023-53382)

  - 已解決 Linux 核心中的下列弱點：RDMA/irdma: Cap MSIX used to online CPUs + 1 The irdma driver can use a maximum number of msix vectors equal to num_online_cpus() + 1 and the kernel warning stack below is shown if that number is exceeded. The kernel throws a warning as the driver tries to update the affinity hint with a CPU mask greater than the max CPU IDs. Fix this by capping the MSIX vectors to num_online_cpus() + 1. WARNING: CPU: 7 PID: 23655 at include/linux/cpumask.h:106 irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma] RIP: 0010:irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma] Call Trace:
    irdma_rt_init_hw+0xa62/0x1290 [irdma] ? irdma_alloc_local_mac_entry+0x1a0/0x1a0 [irdma] ?
    __is_kernel_percpu_address+0x63/0x310 ? rcu_read_lock_held_common+0xe/0xb0 ? irdma_lan_unregister_qset+0x280/0x280 [irdma] ? irdma_request_reset+0x80/0x80 [irdma] ? ice_get_qos_params+0x84/0x390 [ice] irdma_probe+0xa40/0xfc0 [irdma] ? rcu_read_lock_bh_held+0xd0/0xd0 ? irdma_remove+0x140/0x140 [irdma] ? rcu_read_lock_sched_held+0x62/0xe0 ? down_write+0x187/0x3d0 ? auxiliary_match_id+0xf0/0x1a0 ? irdma_remove+0x140/0x140 [irdma] auxiliary_bus_probe+0xa6/0x100
    __driver_probe_device+0x4a4/0xd50 ? __device_attach_driver+0x2c0/0x2c0 driver_probe_device+0x4a/0x110
    __driver_attach+0x1aa/0x350 bus_for_each_dev+0x11d/0x1b0 ? subsys_dev_iter_init+0xe0/0xe0 bus_add_driver+0x3b1/0x610 driver_register+0x18e/0x410 ? 0xffffffffc0b88000 irdma_init_module+0x50/0xaa [irdma] do_one_initcall+0x103/0x5f0 ? perf_trace_initcall_level+0x420/0x420 ? do_init_module+0x4e/0x700 ?
    __kasan_kmalloc+0x7d/0xa0 ? kmem_cache_alloc_trace+0x188/0x2b0 ? kasan_unpoison+0x21/0x50 do_init_module+0x1d1/0x700 load_module+0x3867/0x5260 ? layout_and_allocate+0x3990/0x3990 ? rcu_read_lock_held_common+0xe/0xb0 ? rcu_read_lock_sched_held+0x62/0xe0 ? rcu_read_lock_bh_held+0xd0/0xd0 ? __vmalloc_node_range+0x46b/0x890 ? lock_release+0x5c8/0xba0 ? alloc_vm_area+0x120/0x120 ? selinux_kernel_module_from_file+0x2a5/0x300 ? __inode_security_revalidate+0xf0/0xf0 ?
    __do_sys_init_module+0x1db/0x260 __do_sys_init_module+0x1db/0x260 ? load_module+0x5260/0x5260 ? do_syscall_64+0x22/0x450 do_syscall_64+0xa5/0x450 entry_SYSCALL_64_after_hwframe+0x66/0xdb (CVE-2023-53811)

  - 已解決 Linux 核心中的下列弱點：i2c: smbus: fix NULL function pointer dereference Baruch reported an OOPS when using the designware controller as target only. Target-only modes break the assumption of one transfer function always being available. Fix this by always checking the pointer in __i2c_transfer. [wsa: dropped the simplification in core-smbus to avoid theoretical regressions] (CVE-2024-35984)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

偵測

Rocky Linux 9.6 [TuxCare] 安全性更新：kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc 多個弱點（ALMALINUX9.6：CLSA-2026：1783091784）

medium Nessus Plugin ID 360066

版本 1.2

版本 1.1

版本 1.2 Oct 18, 2026, 10:57 AM CVE (set "CVE" coverage to "CVE-2022-49194,CVE-2022-49269,CVE-2023-53382,CVE-2023-53811,CVE-2024-35984,CVE-2024-50048,CVE-2024-56539,CVE-2024-56648,CVE-2024-58090,CVE-2025-22116,CVE-2025-23143,CVE-2025-37911,CVE-2025-37920,CVE-2025-38399,CVE-2025-68211,CVE-2026-23352,CVE-2026-23439,CVE-2026-46113,CVE-2026-53359") CVSS temporal metrics ("CVSSv2 temporal vector" set to "CVSS2#E:POC/RL:OF/RC:C") CVSS temporal metrics ("CVSSv3 temporal vector" set to "CVSS:3.0/E:P/RL:O/RC:C") Detection (updated detection logic) Exploit attributes ("Exploit available" set to "True") Exploit attributes ("Exploitability ease" changed from "No known exploits are available" to "Exploits are available") Plugin metadata Plugin Feed: 202610181057
版本 1.1 Oct 1, 2026, 9:59 PM New Plugin Feed: 202610012159

偵測

Rocky Linux 9.6 [TuxCare] 安全性更新：kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc 多個弱點 （ALMALINUX9.6：CLSA-2026：1783091784）

medium Nessus Plugin ID 360066

版本 1.2

版本 1.1

Rocky Linux 9.6 [TuxCare] 安全性更新：kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc 多個弱點（ALMALINUX9.6：CLSA-2026：1783091784）