CentOS Linux 7 主機已安裝的套件會受到 TuxCare CENTOS7：CLSA-2026：1782148320 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf() Fix an 11-year old bug in ngene_command_config_free_buf() while addressing the following warnings caught with -Warray-bounds: arch/alpha/include/asm/string.h:22:16: warning:
    '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25:
    warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] The problem is that the original code is trying to copy 6 bytes of data into a one-byte size member _config_ of the wrong structue FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &com.cmd.ConfigureBuffers.config. It seems that the right structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains 6 more members apart from the header _hdr_. Also, the name of the function ngene_command_config_free_buf() suggests that the actual intention is to ConfigureFreeBuffers, instead of ConfigureBuffers (which takes place in the function ngene_command_config_buf(), above). Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as the destination address, instead of &com.cmd.ConfigureBuffers.config, when calling memcpy(). This also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). (CVE-2021-47288)

  - 已解決 Linux 核心中的下列弱點：nvme: fix a possible use-after-free in controller reset during load Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp.
    The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should:
    1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER. (CVE-2022-48790)

  - 已解決 Linux 核心中的下列弱點：scsi: pm8001: Fix use-after-free for aborted TMF sas_task Currently a use-after-free may occur if a TMF sas_task is aborted before we handle the IO completion in mpi_ssp_completion(). The abort occurs due to timeout. When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the sas_task is freed in pm8001_exec_internal_tmf_task(). However, if the I/O completion occurs later, the I/O completion still thinks that the sas_task is available. Fix this by clearing the ccb->task if the TMF times out - the I/O completion handler does nothing if this pointer is cleared. (CVE-2022-48791)

  - 已解決 Linux 核心中的下列弱點：tracing: Free buffers when a used dynamic event is removed After 65536 dynamic events have been added and removed, the type field of the event then uses the first type number that is available (not currently used by other events). A type number is the identifier of the binary blobs in the tracing ring buffer (known as events) to map them to logic that can parse the binary blob. The issue is that if a dynamic event (like a kprobe event) is traced and is in the ring buffer, and then that event is removed (because it is dynamic, which means it can be created and destroyed), if another dynamic event is created that has the same number that new event's logic on parsing the binary blob will be used. To show how this can be an issue, the following can crash the kernel: # cd /sys/kernel/tracing # for i in `seq 65536`; do echo 'p:kprobes/foo do_sys_openat2 $arg1:u32' > kprobe_events # done For every iteration of the above, the writing to the kprobe_events will remove the old event and create a new one (with the same format) and increase the type number to the next available on until the type number reaches over 65535 which is the max number for the 16 bit type. After it reaches that number, the logic to allocate a new number simply looks for the next available number.
    When an dynamic event is removed, that number is then available to be reused by the next dynamic event created. That is, once the above reaches the max number, the number assigned to the event in that loop will remain the same. Now that means deleting one dynamic event and created another will reuse the previous events type number. This is where bad things can happen. After the above loop finishes, the kprobes/foo event which reads the do_sys_openat2 function call's first parameter as an integer. # echo 1 > kprobes/foo/enable # cat /etc/passwd > /dev/null # cat trace cat-2211 [005] .... 2007.849603: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849620: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849838: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849880: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 # echo 0 > kprobes/foo/enable Now if we delete the kprobe and create a new one that reads a string: # echo 'p:kprobes/foo do_sys_openat2 +0($arg2):string' > kprobe_events And now we can the trace: # cat trace sendmail-1942 [002] ..... 530.136320: foo:
    (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930817: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930961: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.934278: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.934563: foo: (do_sys_openat2+0x0/0x240) arg1= ---truncated--- (CVE-2022-49006)

  - 已解決 Linux 核心中的下列弱點：dm raid: fix accesses beyond end of raid member array On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor. In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include: - raid1 legs being added/removed - raid4/5/6/10 number of stripes changed (stripe reshaping) - takeover to higher raid level (e.g. raid5 -> raid6) When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array. Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices(). The out-of-bounds memory accesses was discovered using KASAN. This commit was verified to pass all LVM2 RAID tests (with KASAN enabled). (CVE-2022-49674)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

偵測

CentOS Linux 7 [TuxCare] 安全性更新：bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc 多個漏洞（CENTOS7：CLSA-2026：1782148320）

high Nessus Plugin ID 353232

找不到依附元件

偵測

CentOS Linux 7 [TuxCare] 安全性更新：bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc 多個漏洞 （CENTOS7：CLSA-2026：1782148320）

high Nessus Plugin ID 353232

找不到依附元件

CentOS Linux 7 [TuxCare] 安全性更新：bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc 多個漏洞（CENTOS7：CLSA-2026：1782148320）