AlmaLinux 9.2 [TuxCare] 安全性更新：bpftool / kernel / kernel-abi-stablelists / kernel-core / etc 多個弱點 （ALMALINUX9.2：CLSA-2024：1725293298）
high Nessus Plugin ID 353033
語言:
概要
AlmaLinux 主機缺少一或多個安全性更新。說明
AlmaLinux 9.2 主機已安裝的套件會受到 TuxCare ALMALINUX9.2：CLSA-2024：1725293298 公告中提及的多個弱點影響。- 在具有裝置檔案「/dev/dri/renderD128 (or Dxxx)」的 Linux 核心中，在 GPU 元件的 drivers/gpu/vmxgfx/vmxgfx_execbuf.c 的 vmwgfx 驅動程式中發現 NULL 指標解除參照弱點。此缺陷允許具有系統使用者帳戶的本機攻擊者取得權限，進而造成系統拒絕服務 (DoS)。
(CVE-2022-38096)
- 已解決 Linux 核心中的下列弱點：bnxt: prevent skb UAF after handing over to PTP worker When reading the timestamp is required bnxt_tx_int() hands over the ownership of the completed skb to the PTP worker. The skb should not be used afterwards, as the worker may run before the rest of our code and free the skb, leading to a use-after-free. Since dev_kfree_skb_any() accepts NULL make the loss of ownership more obvious and set skb to NULL. (CVE-2022-48637)
- 在 6.5.9 之前的 Linux 核心中發現一個問題，對 MMIO 暫存器有使用者空間存取權的本機使用者可惡意利用此問題。#VC 處置程式中的錯誤存取檢查以及對 MMIO 存取的 SEV-ES 模擬的指令模擬，可導致核心記憶體被任意寫入存取 (並因此造成特權提升)。這取決於爭用情形，使用者空間可透過爭用情形在 #VC 處置程式讀取指令之前將其替換。(CVE-2023-46813)
- 已解決 Linux 核心中的下列弱點：PM / devfreq: Synchronize devfreq_monitor_[start/stop] There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo simple_ondemand > /sys/class/devfreq/1d84000.ufshc/governor echo performance > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled.
Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. <idle>-0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 <idle>-0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c <idle>-0 [003] 9436.209718:
timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr :
expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29:
ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16:
0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13:
ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff8 ---truncated--- (CVE-2023-52635)
- 已解決 Linux 核心中的下列弱點：sched/psi: Fix use-after-free in ep_remove_wait_queue() If a non-root cgroup gets removed when there is a thread that registered trigger and is polling on a pressure file within the cgroup, the polling waitqueue gets freed in the following path: do_rmdir cgroup_rmdir kernfs_drain_open_files cgroup_file_release cgroup_pressure_release psi_trigger_destroy However, the polling thread still has a reference to the pressure file and will access the freed waitqueue when the file is closed or upon exit: fput ep_eventpoll_release ep_free ep_remove_wait_queue remove_wait_queue This results in use-after-free as pasted below. The fundamental problem here is that cgroup_file_release() (and consequently waitqueue's lifetime) is not tied to the file's real lifetime. Using wake_up_pollfree() here might be less than ideal, but it is in line with the comment at commit 42288cb44c4b (wait: add wake_up_pollfree()) since the waitqueue's lifetime is not tied to file's one and can be considered as another special case. While this would be fixable by somehow making cgroup_file_release() be tied to the fput(), it would require sizable refactoring at cgroups or higher layer which might be more justifiable if we identify more cases like this. BUG: KASAN: use-after-free in
_raw_spin_lock_irqsave+0x60/0xc0 Write of size 4 at addr ffff88810e625328 by task a.out/4404 CPU: 19 PID:
4404 Comm: a.out Not tainted 6.2.0-rc6 #38 Hardware name: Amazon EC2 c5a.8xlarge/, BIOS 1.0 10/16/2017 Call Trace: <TASK> dump_stack_lvl+0x73/0xa0 print_report+0x16c/0x4e0 kasan_report+0xc3/0xf0 kasan_check_range+0x2d2/0x310 _raw_spin_lock_irqsave+0x60/0xc0 remove_wait_queue+0x1a/0xa0 ep_free+0x12c/0x170 ep_eventpoll_release+0x26/0x30 __fput+0x202/0x400 task_work_run+0x11d/0x170 do_exit+0x495/0x1130 do_group_exit+0x100/0x100 get_signal+0xd67/0xde0 arch_do_signal_or_restart+0x2a/0x2b0 exit_to_user_mode_prepare+0x94/0x100 syscall_exit_to_user_mode+0x20/0x40 do_syscall_64+0x52/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Allocated by task 4404: kasan_set_track+0x3d/0x60
__kasan_kmalloc+0x85/0x90 psi_trigger_create+0x113/0x3e0 pressure_write+0x146/0x2e0 cgroup_file_write+0x11c/0x250 kernfs_fop_write_iter+0x186/0x220 vfs_write+0x3d8/0x5c0 ksys_write+0x90/0x110 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 4407:
kasan_set_track+0x3d/0x60 kasan_save_free_info+0x27/0x40 ____kasan_slab_free+0x11d/0x170 slab_free_freelist_hook+0x87/0x150 __kmem_cache_free+0xcb/0x180 psi_trigger_destroy+0x2e8/0x310 cgroup_file_release+0x4f/0xb0 kernfs_drain_open_files+0x165/0x1f0 kernfs_drain+0x162/0x1a0
__kernfs_remove+0x1fb/0x310 kernfs_remove_by_name_ns+0x95/0xe0 cgroup_addrm_files+0x67f/0x700 cgroup_destroy_locked+0x283/0x3c0 cgroup_rmdir+0x29/0x100 kernfs_iop_rmdir+0xd1/0x140 vfs_rmdir+0xfe/0x240 do_rmdir+0x13d/0x280 __x64_sys_rmdir+0x2c/0x30 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd (CVE-2023-52707)
請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。
解決方案
根據 TuxCare 公告 ALMALINUX9.2：CLSA-2024：1725293298 中的指引更新受影響的套件。另請參閱
Plugin 詳細資訊
嚴重性: High
ID: 353033
檔案名稱: tuxcare_alma_linux_9.2_CLSA-2024-1725293298.nasl
版本: 1.1
類型: Local
已發布: 2026/9/30
已更新: 2026/9/30
支援的感應器: Continuous Assessment, Nessus Agent, Tenable Cloud Security, Tenable Self-Hosted Container Security, Nessus
風險資訊
VPR
風險因素: High
分數: 7.9
百分位數: 99.36
Vendor
Vendor Severity: Critical
CVSS v2
風險因素: Medium
基本分數: 6.8
時間性分數: 5.6
媒介: CVSS2#AV:A/AC:H/Au:N/C:C/I:C/A:C
CVSS 評分資料來源: CVE-2024-42225
CVSS v3
風險因素: High
基本分數: 7.8
時間性分數: 7.2
媒介: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
時間媒介: CVSS:3.0/E:F/RL:O/RC:C
CVSS 評分資料來源: CVE-2024-42159
弱點資訊
必要的 KB 項目: Host/OS/extended-third-party, Host/local_checks_enabled, Host/AlmaLinux/release, Host/AlmaLinux/rpm-list, Host/cpu
可被惡意程式利用: true
可輕鬆利用: Exploits are available
修補程式發佈日期: 2024/9/2
弱點發布日期: 2021/7/21
CISA 已知遭惡意利用弱點到期日: 2024/8/28
參考資訊
CVE: CVE-2022-38096, CVE-2022-48637, CVE-2023-46813, CVE-2023-52635, CVE-2023-52707, CVE-2023-52809, CVE-2023-52885, CVE-2024-26602, CVE-2024-26669, CVE-2024-26925, CVE-2024-27397, CVE-2024-33621, CVE-2024-35823, CVE-2024-35885, CVE-2024-35890, CVE-2024-35896, CVE-2024-35962, CVE-2024-36017, CVE-2024-36020, CVE-2024-36883, CVE-2024-36929, CVE-2024-36960, CVE-2024-36971, CVE-2024-37353, CVE-2024-37356, CVE-2024-38384, CVE-2024-38552, CVE-2024-38558, CVE-2024-38581, CVE-2024-41087, CVE-2024-41090, CVE-2024-41091, CVE-2024-42154, CVE-2024-42159, CVE-2024-42161, CVE-2024-42225, CVE-2024-42228
CLSA: 2024:1725293298