CentOS Linux 7 [TuxCare] 安全性更新：bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc 多個弱點 （CENTOS7：CLSA-2026：1783337441）
high Nessus Plugin ID 352867
語言:
概要
CentOS Linux 主機缺少一個或多個安全性更新。說明
CentOS Linux 7 主機已安裝的套件會受到 TuxCare CENTOS7：CLSA-2026：1783337441 公告中提及的多個弱點影響。- 已解決 Linux 核心中的下列弱點：IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields Overflowing either addrlimit or bytes_togo can allow userspace to trigger a buffer overflow of kernel memory. Check for overflows in all the places doing math on user controlled buffers. (CVE-2021-47485)
- 已解決 Linux 核心中的下列弱點：nfsd: fix use-after-free due to delegation race A delegation break could arrive as soon as we've called vfs_setlease. A delegation break runs a callback which immediately (in nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru. If we then exit nfs4_set_delegation without hashing the delegation, it will be freed as soon as the callback is done with it, without ever being removed from del_recall_lru. Symptoms show up later as use-after-free or list corruption warnings, usually in the laundromat thread. I suspect aba2072f4523 nfsd: grant read delegations to clients holding writes made this bug easier to hit, but I looked as far back as v3.0 and it looks to me it already had the same problem. So I'm not sure where the bug was introduced; it may have been there from the beginning. (CVE-2021-47506)
- 已解決 Linux 核心中的下列弱點：proc/vmcore: fix clearing user buffer by properly using clear_user() To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via cp: systemd[1]:
Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]:
saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]:
saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP:
0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08:
0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2:
00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Some x86-64 CPUs have a CPU feature called Supervisor Mode Access Prevention (SMAP), which is used to detect wrong access from the kernel to user buffers like this:
SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac(). To fix, properly use clear_user() when we're dealing with a user buffer. (CVE-2021-47566)
- 已解決 Linux 核心中的下列弱點：staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect() The free_rtllib() function frees the dev pointer so there is use after free on the next line. Re-arrange things to avoid that. (CVE-2021-47571)
- 已解決 Linux 核心中的下列弱點：scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select() In resp_mode_select() sanity check the block descriptor len to avoid UAF. BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 Read of size 1 at addr ffff888026670f50 by task scsicmd/15032 CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Call Trace: <TASK> dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113 (CVE-2021-47576)
請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。
解決方案
根據 TuxCare 公告 CENTOS7：CLSA-2026：1783337441 中的指引更新受影響的套件。另請參閱
Plugin 詳細資訊
嚴重性: High
ID: 352867
檔案名稱: tuxcare_centos_7_CLSA-2026-1783337441.nasl
版本: 1.1
類型: Local
代理程式: unix
已發布: 2026/9/30
已更新: 2026/9/30
支援的感應器: Continuous Assessment, Nessus Agent, Tenable Cloud Security, Tenable Self-Hosted Container Security, Nessus
風險資訊
VPR
風險因素: High
分數: 7
百分位數: 98.06
Vendor
Vendor Severity: Important
CVSS v2
風險因素: Medium
基本分數: 6.8
時間性分數: 5
媒介: CVSS2#AV:L/AC:L/Au:S/C:C/I:C/A:C
CVSS 評分資料來源: CVE-2023-52664
CVSS v3
風險因素: High
基本分數: 7.8
時間性分數: 6.8
媒介: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
時間媒介: CVSS:3.0/E:U/RL:O/RC:C
弱點資訊
必要的 KB 項目: Host/OS/extended-third-party, Host/local_checks_enabled, Host/CentOS/release, Host/CentOS/rpm-list
可輕鬆利用: No known exploits are available
修補程式發佈日期: 2026/7/6
弱點發布日期: 2021/7/21
參考資訊
CVE: CVE-2021-47281, CVE-2021-47485, CVE-2021-47506, CVE-2021-47566, CVE-2021-47571, CVE-2021-47576, CVE-2021-47589, CVE-2022-48733, CVE-2022-48951, CVE-2022-49740, CVE-2022-50274, CVE-2023-52664, CVE-2026-31408, CVE-2026-43088, CVE-2026-43158
CLSA: 2026:1783337441