CentOS Linux 8.4 主機安裝的套件會受到 TuxCare CENTOS8.4：CLSA-2025：1757961864 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：can: peak_usb: fix use after free bugs After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue.
    (CVE-2021-47670)

  - 已解決 Linux 核心中的下列弱點：scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq storvsc_error_wq workqueue should not be marked as WQ_MEM_RECLAIM as it doesn't need to make forward progress under memory pressure. Marking this workqueue as WQ_MEM_RECLAIM may cause deadlock while flushing a non-WQ_MEM_RECLAIM workqueue. In the current state it causes the following warning: [ 14.506347] ------------[ cut here ]------------ [ 14.506354] workqueue: WQ_MEM_RECLAIM storvsc_error_wq_0:storvsc_remove_lun is flushing !WQ_MEM_RECLAIM events_freezable_power_:disk_events_workfn [ 14.506360] WARNING: CPU: 0 PID: 8 at <-snip->kernel/workqueue.c:2623 check_flush_dependency+0xb5/0x130 [ 14.506390] CPU: 0 PID: 8 Comm:
    kworker/u4:0 Not tainted 5.4.0-1086-azure #91~18.04.1-Ubuntu [ 14.506391] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 14.506393] Workqueue: storvsc_error_wq_0 storvsc_remove_lun [ 14.506395] RIP: 0010:check_flush_dependency+0xb5/0x130 <-snip-> [ 14.506408] Call Trace: [ 14.506412] __flush_work+0xf1/0x1c0 [ 14.506414]
    __cancel_work_timer+0x12f/0x1b0 [ 14.506417] ? kernfs_put+0xf0/0x190 [ 14.506418] cancel_delayed_work_sync+0x13/0x20 [ 14.506420] disk_block_events+0x78/0x80 [ 14.506421] del_gendisk+0x3d/0x2f0 [ 14.506423] sr_remove+0x28/0x70 [ 14.506427] device_release_driver_internal+0xef/0x1c0 [ 14.506428] device_release_driver+0x12/0x20 [ 14.506429] bus_remove_device+0xe1/0x150 [ 14.506431] device_del+0x167/0x380 [ 14.506432]
    __scsi_remove_device+0x11d/0x150 [ 14.506433] scsi_remove_device+0x26/0x40 [ 14.506434] storvsc_remove_lun+0x40/0x60 [ 14.506436] process_one_work+0x209/0x400 [ 14.506437] worker_thread+0x34/0x400 [ 14.506439] kthread+0x121/0x140 [ 14.506440] ? process_one_work+0x400/0x400 [14.506441] ? kthread_park+0x90/0x90 [ 14.506443] ret_from_fork+0x35/0x40 [ 14.506445] ---[ end trace 2d9633159fdc6ee7 ]--- (CVE-2022-49986)

  - 已解決 Linux 核心中的下列弱點：netfilter: nft_tproxy: restrict to prerouting hook TPROXY is only allowed from prerouting, but nft_tproxy doesn't check this. This fixes a crash (null dereference) when using tproxy from e.g. output. (CVE-2022-50001)

  - 已解決 Linux 核心中的下列弱點：ice: xsk: prohibit usage of non-balanced queue id Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a queue pair, e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of combined queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF:
    supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID:
    21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP:
    0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX:
    0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08:
    000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12:
    000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP:
    0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX:
    0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP:
    000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11:
    0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15:
    0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc
    ---truncated--- (CVE-2022-50003)

  - 已解決 Linux 核心中的下列弱點：ASoC: SOF: Intel: hda-ipc: Do not process IPC reply before firmware boot It is not yet clear, but it is possible to create a firmware so broken that it will send a reply message before a FW_READY message (it is not yet clear if FW_READY will arrive later). Since the reply_data is allocated only after the FW_READY message, this will lead to a NULL pointer dereference if not filtered out. The issue was reported with IPC4 firmware but the same condition is present for IPC3. (CVE-2022-50015)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

偵測

CentOS Linux 8.4 [TuxCare] 安全性更新：bpftool / kernel / kernel-core / kernel-cross-headers / etc 多個弱點（CENTOS8.4：CLSA-2025：1757961864）

high Nessus Plugin ID 352831

找不到變更記錄

偵測

CentOS Linux 8.4 [TuxCare] 安全性更新：bpftool / kernel / kernel-core / kernel-cross-headers / etc 多個弱點 （CENTOS8.4：CLSA-2025：1757961864）

high Nessus Plugin ID 352831

找不到變更記錄

CentOS Linux 8.4 [TuxCare] 安全性更新：bpftool / kernel / kernel-core / kernel-cross-headers / etc 多個弱點（CENTOS8.4：CLSA-2025：1757961864）