CentOS Linux 8.4 [TuxCare] 安全性更新：bpftool / kernel / kernel-core / kernel-cross-headers / etc 多個弱點 （CENTOS8.4：CLSA-2026：1777614651）
high Nessus Plugin ID 352091
語言:
概要
CentOS Linux 主機缺少一個或多個安全性更新。說明
CentOS Linux 8.4 主機安裝的套件會受到 TuxCare CENTOS8.4：CLSA-2026：1777614651 公告中所述多個弱點影響。- 已解決 Linux 核心中的下列弱點：virtio_net: fix xdp_rxq_info bug after suspend/resume The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac
__dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up. (CVE-2022-49687)
- 已解決 Linux 核心中的下列弱點：RDMA/srpt: Fix a use-after-free Change the LIO port members inside struct srpt_port from regular members into pointers. Allocate the LIO port data structures from inside srpt_make_tport() and free these from inside srpt_make_tport(). Keep struct srpt_device as long as either an RDMA port or a LIO target port is associated with it. This patch decouples the lifetime of struct srpt_port (controlled by the RDMA core) and struct srpt_port_id (controlled by LIO). This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt] Read of size 8 at addr ffff888141cc34b8 by task check/5093 Call Trace:
<TASK> show_stack+0x4e/0x53 dump_stack_lvl+0x51/0x66 print_address_description.constprop.0.cold+0xea/0x41e print_report.cold+0x90/0x205 kasan_report+0xb9/0xf0 __asan_load8+0x69/0x90 srpt_enable_tpg+0x31/0x70 [ib_srpt] target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod] configfs_write_iter+0x18b/0x210 new_sync_write+0x1f2/0x2f0 vfs_write+0x3e3/0x540 ksys_write+0xbb/0x140 __x64_sys_write+0x42/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> (CVE-2022-50129)
- 已解決 Linux 核心中的下列弱點：drm/amdkfd: Fix double release compute pasid If kfd_process_device_init_vm returns failure after vm is converted to compute vm and vm->pasid set to compute pasid, KFD will not take pdd->drm_file reference. As a result, drm close file handler maybe called to release the compute pasid before KFD process destroy worker to release the same pasid and set vm->pasid to zero, this generates below WARNING backtrace and NULL pointer access. Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step of kfd_process_device_init_vm, to ensure vm pasid is the original pasid if acquiring vm failed or is the compute pasid with pdd->drm_file reference taken to avoid double release same pasid. amdgpu: Failed to create process VM object ida_free called for id=32770 which is not allocated. WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140 RIP:
0010:ida_free+0x96/0x140 Call Trace: amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu] amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu] drm_file_free.part.13+0x216/0x270 [drm] drm_close_helper.isra.14+0x60/0x70 [drm] drm_release+0x6e/0xf0 [drm] __fput+0xcc/0x280 ____fput+0xe/0x20 task_work_run+0x96/0xc0 do_exit+0x3d0/0xc10 BUG: kernel NULL pointer dereference, address:
0000000000000000 RIP: 0010:ida_free+0x76/0x140 Call Trace: amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu] amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu] drm_file_free.part.13+0x216/0x270 [drm] drm_close_helper.isra.14+0x60/0x70 [drm] drm_release+0x6e/0xf0 [drm] __fput+0xcc/0x280 ____fput+0xe/0x20 task_work_run+0x96/0xc0 do_exit+0x3d0/0xc10 (CVE-2022-50303)
- 已解決 Linux 核心中的下列弱點：ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value The return value of acpi_fetch_acpi_dev() could be NULL, which would cause a NULL pointer dereference to occur in acpi_device_hid(). [ rjw: Subject and changelog edits, added empty line after if () ] (CVE-2022-50327)
- 已解決 Linux 核心中的下列弱點：NFSD: Protect against send buffer overflow in NFSv2 READ Since before the git era, NFSD has conserved the number of pages held by each nfsd thread by combining the RPC receive and send buffers into a single array of pages. This works because there are no cases where an operation needs a large RPC Call message and a large RPC Reply at the same time. Once an RPC Call has been received, svc_process() updates svc_rqst::rq_res to describe the part of rq_pages that can be used for constructing the Reply. This means that the send buffer (rq_res) shrinks when the received RPC record containing the RPC Call is large. A client can force this shrinkage on TCP by sending a correctly- formed RPC Call header contained in an RPC record that is excessively large. The full maximum payload size cannot be constructed in that case. (CVE-2022-50410)
請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。
解決方案
根據 TuxCare 公告 CENTOS8.4：CLSA-2026：1777614651 中的指引更新受影響的套件。另請參閱
Plugin 詳細資訊
嚴重性: High
ID: 352091
檔案名稱: tuxcare_centos_8.4_CLSA-2026-1777614651.nasl
版本: 1.2
類型: Local
代理程式: unix
已發布: 2026/9/30
已更新: 2026/10/1
支援的感應器: Nessus Agent, Continuous Assessment, Tenable Cloud Security, Tenable Self-Hosted Container Security, Nessus
風險資訊
VPR
風險因素: Critical
分數: 9.5
百分位數: 99.87
Vendor
Vendor Severity: Important
CVSS v2
風險因素: Medium
基本分數: 6.8
時間性分數: 5.9
媒介: CVSS2#AV:L/AC:L/Au:S/C:C/I:C/A:C
CVSS 評分資料來源: CVE-2026-23193
CVSS v3
風險因素: High
基本分數: 7.8
時間性分數: 7.5
媒介: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
時間媒介: CVSS:3.0/E:H/RL:O/RC:C
CVSS v4
風險因素: High
Base Score: 8.6
Threat Score: 8.6
Threat Vector: CVSS:4.0/E:A
Vector: CVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N
CVSS 評分資料來源: CVE-2026-31431
弱點資訊
必要的 KB 項目: Host/local_checks_enabled, Host/CentOS/release, Host/CentOS/rpm-list, Host/OS/extended-third-party
可被惡意程式利用: true
可輕鬆利用: Exploits are available
修補程式發佈日期: 2026/5/1
弱點發布日期: 2021/7/21
CISA 已知遭惡意利用弱點到期日: 2026/5/15
可惡意利用
Core Impact
Metasploit (Copy Fail AF_ALG + authencesn Page-Cache Write)
參考資訊
CVE: CVE-2022-49267, CVE-2022-49687, CVE-2022-50129, CVE-2022-50303, CVE-2022-50327, CVE-2022-50410, CVE-2022-50543, CVE-2022-50546, CVE-2022-50673, CVE-2022-50698, CVE-2022-50699, CVE-2022-50865, CVE-2022-50881, CVE-2023-3772, CVE-2023-52796, CVE-2023-53147, CVE-2023-53254, CVE-2023-53286, CVE-2023-53296, CVE-2023-53380, CVE-2023-53539, CVE-2023-53559, CVE-2023-53577, CVE-2023-53596, CVE-2023-54014, CVE-2023-54098, CVE-2023-54207, CVE-2023-54317, CVE-2024-38556, CVE-2024-41069, CVE-2024-46713, CVE-2025-37882, CVE-2025-37885, CVE-2025-38103, CVE-2025-38375, CVE-2025-38563, CVE-2025-38565, CVE-2025-38728, CVE-2025-39744, CVE-2025-39751, CVE-2025-39898, CVE-2025-39973, CVE-2025-40135, CVE-2025-40149, CVE-2025-40158, CVE-2025-40271, CVE-2025-71085, CVE-2026-22980, CVE-2026-22998, CVE-2026-23060, CVE-2026-23089, CVE-2026-23193, CVE-2026-23204, CVE-2026-31431, CVE-2026-43077
CLSA: 2026:1777614651