Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且供應商未提供可用的修補程式。

  - 已解決 Linux 核心中的下列弱點：sched_ext: Fix NULL sched deref in kfunc sub-sched error paths When the root scheduler has sub-scheds attached, the COMPAT kfunc wrappers scx_bpf_select_cpu_and() and scx_bpf_dsq_insert_vtime() refuse the call and report to @p's scheduler:
    scx_error(scx_task_sched(p), ... must be used); The wrappers are reachable with tasks that have no scheduler. scx_bpf_select_cpu_and() is in the select_cpu kfunc group, which scx_kfunc_context_filter() opens to BPF_PROG_TYPE_SYSCALL programs; scx_bpf_dsq_insert_vtime() is in the enqueue_dispatch group, which ops.enqueue() and ops.dispatch() may call with any KF_RCU task -- the group has no kf_tasks validation, and scx_dsq_insert_preamble() checks task ownership with scx_task_on_sched() precisely because @p may be an arbitrary task. scx_task_sched(p) is p->scx.sched, which is NULL for tasks past sched_ext_dead() -- which clears it via scx_disable_and_exit_task() on exit -- and for idle tasks, which the enable paths skip as they are never scheduled through SCX. It is also an rcu_dereference_protected() that expects @p's pi_lock or rq lock, which neither wrapper holds. Passing NULL to scx_error() reaches scx_vexit(), which dereferences sch->exit_info, oopsing the kernel. One concrete trigger exercised while developing the fix: a BPF_PROG_TYPE_SYSCALL program calling the select_cpu_and wrapper on an exited-but-not-reaped task while a sub-scheduler was attached (its pid stays findable while the zombie is unreaped;
    faulting instruction is the scx_vexit() prologue mov r15,[rdi+0x398] with RDI=NULL and 0x398 the offset of sch->exit_info): sched_ext: BPF scheduler kfunc_subsched_null enabled sched_ext: BPF sub-scheduler kfunc_subsched_null enabled sched_ext: Unassociated program run_select_cpu_ (id 76) BUG: kernel NULL pointer dereference, address: 0000000000000398 #PF: supervisor read access in kernel mode #PF:
    error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP NOPTI CPU: 7 UID: 0 PID: 8201 Comm:
    kfunc_test_runn Tainted: G W RIP: 0010:scx_vexit+0x25/0xa0 Code: ... <4c> 8b bf 98 03 00 00 ... CR2:
    0000000000000398 Call Trace: <TASK> __scx_exit+0x4f/0x70 scx_bpf_select_cpu_and+0xab/0xb0 bpf_prog_430ed61a7b66e03a_run_select_cpu_and+0x9c/0xe7 ? __x64_sys_bpf+0x2c/0x40 bpf_prog_test_run_syscall+0x130/0x2f0 __sys_bpf+0x930/0x10d0 ? __x64_sys_bpf+0x2c/0x40
    __x64_sys_bpf+0x2c/0x40 do_syscall_64+0xbc/0x460 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Read @p's scheduler under RCU instead, which the wrappers can do from their guard(rcu)(): fault it when it can be determined, and when it can't be determined -- @p is a task past sched_ext_dead() or an idle task -- there is nothing obviously wrong to report, so just refuse the call as before without faulting any scheduler. These COMPAT wrappers are scheduled for eventual removal once the deprecation grace period elapses, but until then -- and regardless of their removal timeline -- they must not oops the kernel on a task they are handed. (CVE-2026-98220)

請注意，Nessus 依賴供應商報告的套件存在。

Linux/Unix 主机中安装的一个或多个程序包受到一个漏洞影响，而供应商没有提供补丁程序。

  - 已修复 Linux 内核中的下列漏洞：sched_ext: Fix NULL sched deref in kfunc sub-sched error paths When the root scheduler has sub-scheds attached, the COMPAT kfunc wrappers scx_bpf_select_cpu_and() and scx_bpf_dsq_insert_vtime() refuse the call and report to @p's scheduler:
    scx_error(scx_task_sched(p), ... must be used); The wrappers are reachable with tasks that have no scheduler. scx_bpf_select_cpu_and() is in the select_cpu kfunc group, which scx_kfunc_context_filter() opens to BPF_PROG_TYPE_SYSCALL programs; scx_bpf_dsq_insert_vtime() is in the enqueue_dispatch group, which ops.enqueue() and ops.dispatch() may call with any KF_RCU task -- the group has no kf_tasks validation, and scx_dsq_insert_preamble() checks task ownership with scx_task_on_sched() precisely because @p may be an arbitrary task. scx_task_sched(p) is p->scx.sched, which is NULL for tasks past sched_ext_dead() -- which clears it via scx_disable_and_exit_task() on exit -- and for idle tasks, which the enable paths skip as they are never scheduled through SCX. It is also an rcu_dereference_protected() that expects @p's pi_lock or rq lock, which neither wrapper holds. Passing NULL to scx_error() reaches scx_vexit(), which dereferences sch->exit_info, oopsing the kernel. One concrete trigger exercised while developing the fix: a BPF_PROG_TYPE_SYSCALL program calling the select_cpu_and wrapper on an exited-but-not-reaped task while a sub-scheduler was attached (its pid stays findable while the zombie is unreaped;
    faulting instruction is the scx_vexit() prologue mov r15,[rdi+0x398] with RDI=NULL and 0x398 the offset of sch->exit_info): sched_ext: BPF scheduler kfunc_subsched_null enabled sched_ext: BPF sub-scheduler kfunc_subsched_null enabled sched_ext: Unassociated program run_select_cpu_ (id 76) BUG: kernel NULL pointer dereference, address: 0000000000000398 #PF: supervisor read access in kernel mode #PF:
    error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP NOPTI CPU: 7 UID: 0 PID: 8201 Comm:
    kfunc_test_runn Tainted: G W RIP: 0010:scx_vexit+0x25/0xa0 Code: ... <4c> 8b bf 98 03 00 00 ... CR2:
    0000000000000398 Call Trace: <TASK> __scx_exit+0x4f/0x70 scx_bpf_select_cpu_and+0xab/0xb0 bpf_prog_430ed61a7b66e03a_run_select_cpu_and+0x9c/0xe7 ? __x64_sys_bpf+0x2c/0x40 bpf_prog_test_run_syscall+0x130/0x2f0 __sys_bpf+0x930/0x10d0 ? __x64_sys_bpf+0x2c/0x40
    __x64_sys_bpf+0x2c/0x40 do_syscall_64+0xbc/0x460 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Read @p's scheduler under RCU instead, which the wrappers can do from their guard(rcu)(): fault it when it can be determined, and when it can't be determined -- @p is a task past sched_ext_dead() or an idle task -- there is nothing obviously wrong to report, so just refuse the call as before without faulting any scheduler. These COMPAT wrappers are scheduled for eventual removal once the deprecation grace period elapses, but until then -- and regardless of their removal timeline -- they must not oops the kernel on a task they are handed. (CVE-2026-98220)

请注意，Nessus 依赖供应商报告的程序包是否存在进行判断。

Linux/Unix ホストには、ベンダーが提供するパッチが利用できない脆弱性の影響を受ける複数のパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: sched_ext: Fix NULL sched deref in kfunc sub-sched error paths When the root scheduler has sub-scheds attached, the COMPAT kfunc wrappers scx_bpf_select_cpu_and() and scx_bpf_dsq_insert_vtime() refuse the call and report to @p's scheduler:
    scx_error(scx_task_sched(p), ... must be used); The wrappers are reachable with tasks that have no scheduler. scx_bpf_select_cpu_and() is in the select_cpu kfunc group, which scx_kfunc_context_filter() opens to BPF_PROG_TYPE_SYSCALL programs; scx_bpf_dsq_insert_vtime() is in the enqueue_dispatch group, which ops.enqueue() and ops.dispatch() may call with any KF_RCU task -- the group has no kf_tasks validation, and scx_dsq_insert_preamble() checks task ownership with scx_task_on_sched() precisely because @p may be an arbitrary task. scx_task_sched(p) is p->scx.sched, which is NULL for tasks past sched_ext_dead() -- which clears it via scx_disable_and_exit_task() on exit -- and for idle tasks, which the enable paths skip as they are never scheduled through SCX. It is also an rcu_dereference_protected() that expects @p's pi_lock or rq lock, which neither wrapper holds. Passing NULL to scx_error() reaches scx_vexit(), which dereferences sch->exit_info, oopsing the kernel. One concrete trigger exercised while developing the fix: a BPF_PROG_TYPE_SYSCALL program calling the select_cpu_and wrapper on an exited-but-not-reaped task while a sub-scheduler was attached (its pid stays findable while the zombie is unreaped;
    faulting instruction is the scx_vexit() prologue mov r15,[rdi+0x398] with RDI=NULL and 0x398 the offset of sch->exit_info): sched_ext: BPF scheduler kfunc_subsched_null enabled sched_ext: BPF sub-scheduler kfunc_subsched_null enabled sched_ext: Unassociated program run_select_cpu_ (id 76) BUG: kernel NULL pointer dereference, address: 0000000000000398 #PF: supervisor read access in kernel mode #PF:
    error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP NOPTI CPU: 7 UID: 0 PID: 8201 Comm:
    kfunc_test_runn Tainted: G W RIP: 0010:scx_vexit+0x25/0xa0 Code: ... <4c> 8b bf 98 03 00 00 ... CR2:
    0000000000000398 Call Trace: <TASK> __scx_exit+0x4f/0x70 scx_bpf_select_cpu_and+0xab/0xb0 bpf_prog_430ed61a7b66e03a_run_select_cpu_and+0x9c/0xe7 ? __x64_sys_bpf+0x2c/0x40 bpf_prog_test_run_syscall+0x130/0x2f0 __sys_bpf+0x930/0x10d0 ? __x64_sys_bpf+0x2c/0x40
    __x64_sys_bpf+0x2c/0x40 do_syscall_64+0xbc/0x460 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Read @p's scheduler under RCU instead, which the wrappers can do from their guard(rcu)(): fault it when it can be determined, and when it can't be determined -- @p is a task past sched_ext_dead() or an idle task -- there is nothing obviously wrong to report, so just refuse the call as before without faulting any scheduler. These COMPAT wrappers are scheduled for eventual removal once the deprecation grace period elapses, but until then -- and regardless of their removal timeline -- they must not oops the kernel on a task they are handed. (CVE-2026-98220)

Nessus は、ベンダーによって報告されたパッケージの存在に依存していることに注意してください。

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix NULL sched deref in     kfunc sub-sched error paths When the root scheduler has sub-scheds attached, the COMPAT kfunc wrappers     scx_bpf_select_cpu_and() and scx_bpf_dsq_insert_vtime() refuse the call and report to @p's scheduler:
    scx_error(scx_task_sched(p), ... must be used); The wrappers are reachable with tasks that have no     scheduler. scx_bpf_select_cpu_and() is in the select_cpu kfunc group, which scx_kfunc_context_filter()     opens to BPF_PROG_TYPE_SYSCALL programs; scx_bpf_dsq_insert_vtime() is in the enqueue_dispatch group,     which ops.enqueue() and ops.dispatch() may call with any KF_RCU task -- the group has no kf_tasks     validation, and scx_dsq_insert_preamble() checks task ownership with scx_task_on_sched() precisely because     @p may be an arbitrary task. scx_task_sched(p) is p->scx.sched, which is NULL for tasks past     sched_ext_dead() -- which clears it via scx_disable_and_exit_task() on exit -- and for idle tasks, which     the enable paths skip as they are never scheduled through SCX. It is also an rcu_dereference_protected()     that expects @p's pi_lock or rq lock, which neither wrapper holds. Passing NULL to scx_error() reaches     scx_vexit(), which dereferences sch->exit_info, oopsing the kernel. One concrete trigger exercised while     developing the fix: a BPF_PROG_TYPE_SYSCALL program calling the select_cpu_and wrapper on an exited-but-     not-reaped task while a sub-scheduler was attached (its pid stays findable while the zombie is unreaped;
    faulting instruction is the scx_vexit() prologue mov r15,[rdi+0x398] with RDI=NULL and 0x398 the offset     of sch->exit_info): sched_ext: BPF scheduler kfunc_subsched_null enabled sched_ext: BPF sub-scheduler     kfunc_subsched_null enabled sched_ext: Unassociated program run_select_cpu_ (id 76) BUG: kernel NULL     pointer dereference, address: 0000000000000398 #PF: supervisor read access in kernel mode #PF:
    error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP NOPTI CPU: 7 UID: 0 PID: 8201 Comm:
    kfunc_test_runn Tainted: G W RIP: 0010:scx_vexit+0x25/0xa0 Code: ... <4c> 8b bf 98 03 00 00 ... CR2:
    0000000000000398 Call Trace: <TASK> __scx_exit+0x4f/0x70 scx_bpf_select_cpu_and+0xab/0xb0     bpf_prog_430ed61a7b66e03a_run_select_cpu_and+0x9c/0xe7 ? __x64_sys_bpf+0x2c/0x40     bpf_prog_test_run_syscall+0x130/0x2f0 __sys_bpf+0x930/0x10d0 ? __x64_sys_bpf+0x2c/0x40
    __x64_sys_bpf+0x2c/0x40 do_syscall_64+0xbc/0x460 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Read     @p's scheduler under RCU instead, which the wrappers can do from their guard(rcu)(): fault it when it can     be determined, and when it can't be determined -- @p is a task past sched_ext_dead() or an idle task --     there is nothing obviously wrong to report, so just refuse the call as before without faulting any     scheduler. These COMPAT wrappers are scheduled for eventual removal once the deprecation grace period     elapses, but until then -- and regardless of their removal timeline -- they must not oops the kernel on a     task they are handed. (CVE-2026-98220)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	名稱	產品	系列	已發布	已更新	嚴重性
364243	Linux Distros 未修補弱點：CVE-2026-98220	Nessus	Misc.	2026/10/8	2026/10/8	medium
364243	Linux Distros 未修补的漏洞：CVE-2026-98220	Nessus	Misc.	2026/10/8	2026/10/8	medium
364243	Linux Distros のパッチ未適用の脆弱性: CVE-2026-98220	Nessus	Misc.	2026/10/8	2026/10/8	medium
364243	Linux Distros Unpatched Vulnerability : CVE-2026-98220	Nessus	Misc.	2026/10/8	2026/10/8	medium

偵測

搜尋 Plugin

medium

medium

medium

medium