Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且廠商未提供可用的修補程式。

  - nvdimm： pmem：在資料REQ_FUA REQ_PREFLUSH pmem_submit_bio寫入之前保留 PREFLUSH 這可讓資料寫入在預先排清失敗後執行，並且儘管排序障礙失敗，仍可以成功完成生物。在接觸生物資料之前同步執行REQ_PREFLUSH重新整理，如果失敗，請以重新整理錯誤完成生物。保留非同步重新整理鏈結以進行REQ_FUA。此時，資料複製已完成，父 bio 可以等待鏈結的排清 bio。CVE-2026-98161

請注意，Nessus 的判定取決於廠商所報告的套件是否存在。

AlmaLinux 9.2 主機已安裝的套件會受到 TuxCare ALMALINUX9.2：CLSA-2026：1791741836 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：vhost: fix hung thread due to erroneous iotlb entries In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at:
    https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries.
    (CVE-2022-48862)

  - 已解決 Linux 核心中的下列弱點：net: hns3: add vlan list lock to protect vlan list When adding port base VLAN, vf VLAN need to remove from HW and modify the vlan state in vf VLAN list as false. If the periodicity task is freeing the same node, it may cause use after free error. This patch adds a vlan list lock to protect the vlan list. (CVE-2022-49182)

  - 已解決 Linux 核心中的下列弱點：perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling amd_pmu_enable_all() does: if (!test_bit(idx, cpuc->active_mask)) continue; amd_pmu_enable_event(cpuc->events[idx]); A perf NMI of another event can come between these two steps. Perf NMI handler internally disables and enables _all_ events, including the one which nmi-intercepted amd_pmu_enable_all() was in process of enabling. If that unintentionally enabled event has very low sampling period and causes immediate successive NMI, causing the event to be throttled, cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop(). This will result in amd_pmu_enable_event() getting called with event=NULL when amd_pmu_enable_all() resumes after handling the NMIs. This causes a kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000198 #PF:
    supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] Call Trace: <TASK> amd_pmu_enable_all+0x68/0xb0 ctx_resched+0xd9/0x150 event_function+0xb8/0x130 ? hrtimer_start_range_ns+0x141/0x4a0 ? perf_duration_warn+0x30/0x30 remote_function+0x4d/0x60
    __flush_smp_call_function_queue+0xc4/0x500 flush_smp_call_function_queue+0x11d/0x1b0 do_idle+0x18f/0x2d0 cpu_startup_entry+0x19/0x20 start_secondary+0x121/0x160 secondary_startup_64_no_verify+0xe5/0xeb </TASK> amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler were recently added as part of BRS enablement but I'm not sure whether we really need them. We can just disable BRS in the beginning and enable it back while returning from NMI. This will solve the issue by not enabling those events whose active_masks are set but are not yet enabled in hw pmu. (CVE-2022-49781)

  - 已解決 Linux 核心中的下列弱點：blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable to lazy-init rq_qos policies because they are optional features and add to hot path overhead once initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit() become noop's. (CVE-2022-50550)

  - 已解決 Linux 核心中的下列弱點：usb: roles: fix NULL pointer issue when put module's reference In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations. (CVE-2024-26747)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

遠端 Debian 13 主機已安裝的套件會受到 dsa-6568 公告中提及的多個弱點影響。

    - ------------------------------------------------------------------------- Debian安全公告 DSA-6568-1 security@debian.org https://www.debian.org/security/Salvatore Bonaccorso 2026 年 10 月 16 日 https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    套件 ： linux CVE ID ： CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315 CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937 CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437 CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467 CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527 CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795 CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832 CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859 CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956 CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002 CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029 CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196 CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243 CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528 CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532 CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537 CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566 CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594 CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615 CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901 CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933 CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939 CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161 CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170 CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174 CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182 CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187 CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191 CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195 CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199 CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203 CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207 CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211 CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215 CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221 CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230 CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234 CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238 CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246 CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251 CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255 CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262 CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266 CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271 CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282 CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291 CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298 CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302 CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308 CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314 CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322 CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327 CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334 CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339 CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344 CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348 CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354 CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360 CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366 CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370 CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377 CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381 CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386 CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409 CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413 CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421 CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426 CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432 CVE-2026-99999 Debian 錯誤 ： 1149499 1149564 1150891

    在 Linux 核心中發現數個弱點，這些弱點可能會導致特權提升、拒絕服務或資訊洩漏。

    針對穩定的發行版本 (trixie)，已在第 6.12.113-1 版中修復這些問題。

    建議您升級 linux 套件。

    如需有關 linux 安全性狀態的詳細資訊，請參閱其安全追蹤頁面：
    https://security-tracker.debian.org/tracker/linux

    有關 Debian 安全公告、如何將這些更新套用至您的系統以及常見問題的詳細資訊，請參閱：https://www.debian.org/security/

    郵寄清單：debian-security-announce@lists.debian.org

Tenable 已直接從 Debian 安全公告擷取前置描述區塊。

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

Linux/Unix 主机中安装的一个或多个程序包受到一个漏洞影响，而供应商没有提供补丁程序。

  - nvdimm：pmem：数据写入前保持 PREFLUSH pmem_submit_bio（） 记录REQ_PREFLUSH错误，但会继续复制 bio 数据，且稍后可通过成功的 REQ_FUA 刷新来覆盖该错误。这允许数据写入在预刷新失败后运行，并且尽管有失败的排序障碍，也可以成功完成 bio。在接触 bio 数据之前同步运行 REQ_PREFLUSH flush，如果失败则以刷新错误完成 bio。保留异步刷新链以便REQ_FUA。此时，数据复制已完成，父 bio 可以等待链式刷新 bio。CVE-2026-98161

请注意，Nessus 依赖供应商报告的程序包是否存在进行判断。

AlmaLinux 9.2 主机上存在安装的程序包，该程序包受到 TuxCare ALMALINUX9.2：CLSA-2026：1791741836公告中提及的多个漏洞的影响。

  - 已修复 Linux 内核中的下列漏洞：vhost: fix hung thread due to erroneous iotlb entries In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at:
    https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries.
    (CVE-2022-48862)

  - 已修复 Linux 内核中的下列漏洞：net: hns3: add vlan list lock to protect vlan list When adding port base VLAN, vf VLAN need to remove from HW and modify the vlan state in vf VLAN list as false. If the periodicity task is freeing the same node, it may cause use after free error. This patch adds a vlan list lock to protect the vlan list. (CVE-2022-49182)

  - 已修复 Linux 内核中的下列漏洞：perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling amd_pmu_enable_all() does: if (!test_bit(idx, cpuc->active_mask)) continue; amd_pmu_enable_event(cpuc->events[idx]); A perf NMI of another event can come between these two steps. Perf NMI handler internally disables and enables _all_ events, including the one which nmi-intercepted amd_pmu_enable_all() was in process of enabling. If that unintentionally enabled event has very low sampling period and causes immediate successive NMI, causing the event to be throttled, cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop(). This will result in amd_pmu_enable_event() getting called with event=NULL when amd_pmu_enable_all() resumes after handling the NMIs. This causes a kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000198 #PF:
    supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] Call Trace: <TASK> amd_pmu_enable_all+0x68/0xb0 ctx_resched+0xd9/0x150 event_function+0xb8/0x130 ? hrtimer_start_range_ns+0x141/0x4a0 ? perf_duration_warn+0x30/0x30 remote_function+0x4d/0x60
    __flush_smp_call_function_queue+0xc4/0x500 flush_smp_call_function_queue+0x11d/0x1b0 do_idle+0x18f/0x2d0 cpu_startup_entry+0x19/0x20 start_secondary+0x121/0x160 secondary_startup_64_no_verify+0xe5/0xeb </TASK> amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler were recently added as part of BRS enablement but I'm not sure whether we really need them. We can just disable BRS in the beginning and enable it back while returning from NMI. This will solve the issue by not enabling those events whose active_masks are set but are not yet enabled in hw pmu. (CVE-2022-49781)

  - 已修复 Linux 内核中的下列漏洞：blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable to lazy-init rq_qos policies because they are optional features and add to hot path overhead once initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit() become noop's. (CVE-2022-50550)

  - 已修复 Linux 内核中的下列漏洞：usb: roles: fix NULL pointer issue when put module's reference In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations. (CVE-2024-26747)

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

远程 Debian 13 主机上存在安装的程序包，该程序包受到 dsa-6568 公告中提及的多个漏洞的影响。

    - ------------------------------------------------------------------------- Debian 安全公告 DSA-6568-1 security@debian.org https://www.debian.org/security/Salvatore Bonaccorso 2026 年 10 月 16 日 https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    程序包：linux CVE ID： CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315 CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937 CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437 CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467 CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527 CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795 CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832 CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859 CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956 CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002 CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029 CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196 CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243 CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528 CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532 CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537 CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566 CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594 CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615 CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901 CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933 CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939 CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161 CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170 CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174 CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182 CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187 CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191 CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195 CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199 CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203 CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207 CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211 CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215 CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221 CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230 CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234 CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238 CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246 CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251 CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255 CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262 CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266 CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271 CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282 CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291 CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298 CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302 CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308 CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314 CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322 CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327 CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334 CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339 CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344 CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348 CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354 CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360 CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366 CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370 CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377 CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381 CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386 CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409 CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413 CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421 CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426 CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432 CVE-2026-99999 Debian 缺陷：1149499 1149564 1150891

    在 Linux 内核中发现多个可能导致权限升级、拒绝服务或信息泄漏的漏洞。

    对于稳定发行版本 (trixie)，已在 6.12.113-1 版本中修复这些问题。

    建议您升级 linux 程序包。

    如需了解 linux 的详细安全状态，请参阅其安全跟踪页面：
    https://security-tracker.debian.org/tracker/linux

    有关 Debian 安全公告、如何将这些更新应用到系统以及常见问题解答的更多信息，请访问以下网址：https://www.debian.org/security/

    邮件列表：debian-security-announce@lists.debian.org

Tenable 已直接从 Debian 安全公告中提取上述描述块。

请注意，Nessus 尚未测试这些问题，而是只依据应用程序自我报告的版本号进行判断。

Linux/Unix ホストには、ベンダーが提供するパッチが利用できない脆弱性の影響を受ける複数のパッケージがインストールされています。

  - nvdimm:pmem:データが書き込まれる前に PREFLUSH を保持します pmem_submit_bio() によりREQ_PREFLUSHエラーが記録されますが、bio データのコピーが続いて、後で REQ_FUA フラッシュの成功によりエラーを上書きする可能性があります。これにより、プレフラッシュが失敗した後にデータ書き込みが実行され、順序付けバリアが失敗しても bio を正常に完了できます。bio データに触れる前に REQ_PREFLUSH フラッシュを同期的に実行し、失敗した場合はフラッシュエラーで bio を完了させます。REQ_FUA に対して非同期フラッシュチェーンを維持します。この時点でデータコピーは完了しており、親 bio は、連鎖的にフラッシュされた bio を待機できます。 (CVE-2026-98161)

Nessus は、ベンダーから報告されたパッケージの存在に依存していることに注意してください。

AlmaLinux 9.2 ホストには、TuxCare ALMALINUX9.2:CLSA-2026:1791741836アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: vhost: fix hung thread due to erroneous iotlb entries In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at:
    https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries.
    (CVE-2022-48862)

  - Linux カーネルでは、以下の脆弱性が解決されています: net: hns3: add vlan list lock to protect vlan list When adding port base VLAN, vf VLAN need to remove from HW and modify the vlan state in vf VLAN list as false. If the periodicity task is freeing the same node, it may cause use after free error. This patch adds a vlan list lock to protect the vlan list. (CVE-2022-49182)

  - Linux カーネルでは、以下の脆弱性が解決されています: perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling amd_pmu_enable_all() does: if (!test_bit(idx, cpuc->active_mask)) continue; amd_pmu_enable_event(cpuc->events[idx]); A perf NMI of another event can come between these two steps. Perf NMI handler internally disables and enables _all_ events, including the one which nmi-intercepted amd_pmu_enable_all() was in process of enabling. If that unintentionally enabled event has very low sampling period and causes immediate successive NMI, causing the event to be throttled, cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop(). This will result in amd_pmu_enable_event() getting called with event=NULL when amd_pmu_enable_all() resumes after handling the NMIs. This causes a kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000198 #PF:
    supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] Call Trace: <TASK> amd_pmu_enable_all+0x68/0xb0 ctx_resched+0xd9/0x150 event_function+0xb8/0x130 ? hrtimer_start_range_ns+0x141/0x4a0 ? perf_duration_warn+0x30/0x30 remote_function+0x4d/0x60
    __flush_smp_call_function_queue+0xc4/0x500 flush_smp_call_function_queue+0x11d/0x1b0 do_idle+0x18f/0x2d0 cpu_startup_entry+0x19/0x20 start_secondary+0x121/0x160 secondary_startup_64_no_verify+0xe5/0xeb </TASK> amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler were recently added as part of BRS enablement but I'm not sure whether we really need them. We can just disable BRS in the beginning and enable it back while returning from NMI. This will solve the issue by not enabling those events whose active_masks are set but are not yet enabled in hw pmu. (CVE-2022-49781)

  - Linux カーネルでは、以下の脆弱性が解決されています: blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable to lazy-init rq_qos policies because they are optional features and add to hot path overhead once initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit() become noop's. (CVE-2022-50550)

  - Linux カーネルでは、以下の脆弱性が解決されています: usb: roles: fix NULL pointer issue when put module's reference In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations. (CVE-2024-26747)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

リモートのDebian 13ホストには、dsa-6568アドバイザリに記載された複数の脆弱性の影響を受けるパッケージがインストールされています。

    - ------------------------------------------------------------------------- Debianセキュリティアドバイザリ DSA-6568-1 security@debian.org https://www.debian.org/security/Salvatore Bonaccorso 2026 年 10 月 16 日 https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    パッケージ:linux CVE ID: CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315 CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937 CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437 CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467 CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527 CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795 CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832 CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859 CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956 CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002 CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029 CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196 CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243 CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528 CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532 CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537 CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566 CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594 CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615 CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901 CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933 CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939 CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161 CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170 CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174 CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182 CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187 CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191 CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195 CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199 CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203 CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207 CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211 CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215 CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221 CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230 CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234 CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238 CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246 CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251 CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255 CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262 CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266 CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271 CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282 CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291 CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298 CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302 CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308 CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314 CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322 CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327 CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334 CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339 CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344 CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348 CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354 CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360 CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366 CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370 CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377 CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381 CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386 CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409 CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413 CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421 CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426 CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432 CVE-2026-99999 Debianバグ:1149499 1149564 1150891

    Linux カーネルに、権限昇格、サービス拒否、または情報漏洩を引き起こす可能性がある、複数の脆弱性が発見されました。

    安定版 (stable) ディストリビューション (trixie) では、これらの問題はバージョン 6.12.113-1 で修正されています。

    お使いの linux パッケージをアップグレードすることを推奨します。

    linux の詳細なセキュリティステータスについては、そのセキュリティトラッカーページを参照してください。
    https://security-tracker.debian.org/tracker/linux

    Debian セキュリティアドバイザリに関する詳細、これらの更新をシステムに適用する方法、およびよくある質問については、こちらを参照してください。https://www.debian.org/security/

    メーリングリスト: debian-security-announce@lists.debian.org

前述の説明ブロックは、Tenable が Debian セキュリティアドバイザリから直接抽出したものです。

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - nvdimm: pmem: keep PREFLUSH before data writes pmem_submit_bio() records a REQ_PREFLUSH error, but     continues to copy the bio data and can later overwrite the error with a successful REQ_FUA flush. That     lets data writes run after a failed preflush and can complete the bio successfully despite the failed     ordering barrier. Run the REQ_PREFLUSH flush synchronously before touching the bio data and complete the     bio with the flush error if it fails. Keep asynchronous flush chaining for REQ_FUA. At that point, data     copy has completed and the parent bio can wait for the chained flush bio. (CVE-2026-98161)

Note that Nessus relies on the presence of the package as reported by the vendor.

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1791741836 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: vhost: fix hung thread due to     erroneous iotlb entries In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and     last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with     iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends     up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous     entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340     vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0     drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0     kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at:
    https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL     in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix     vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries.
    (CVE-2022-48862)

  - In the Linux kernel, the following vulnerability has been resolved: net: hns3: add vlan list lock to     protect vlan list When adding port base VLAN, vf VLAN need to remove from HW and modify the vlan state in     vf VLAN list as false. If the periodicity task is freeing the same node, it may cause use after free     error. This patch adds a vlan list lock to protect the vlan list. (CVE-2022-49182)

  - In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd: Fix crash due to race     between amd_pmu_enable_all, perf NMI and throttling amd_pmu_enable_all() does: if (!test_bit(idx,     cpuc->active_mask)) continue; amd_pmu_enable_event(cpuc->events[idx]); A perf NMI of another event can     come between these two steps. Perf NMI handler internally disables and enables _all_ events, including the     one which nmi-intercepted amd_pmu_enable_all() was in process of enabling. If that unintentionally enabled     event has very low sampling period and causes immediate successive NMI, causing the event to be throttled,     cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop(). This will result in     amd_pmu_enable_event() getting called with event=NULL when amd_pmu_enable_all() resumes after handling the     NMIs. This causes a kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000198 #PF:
    supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] Call Trace: <TASK>     amd_pmu_enable_all+0x68/0xb0 ctx_resched+0xd9/0x150 event_function+0xb8/0x130 ?     hrtimer_start_range_ns+0x141/0x4a0 ? perf_duration_warn+0x30/0x30 remote_function+0x4d/0x60
    __flush_smp_call_function_queue+0xc4/0x500 flush_smp_call_function_queue+0x11d/0x1b0 do_idle+0x18f/0x2d0     cpu_startup_entry+0x19/0x20 start_secondary+0x121/0x160 secondary_startup_64_no_verify+0xe5/0xeb </TASK>     amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler were recently added as part of     BRS enablement but I'm not sure whether we really need them. We can just disable BRS in the beginning and     enable it back while returning from NMI. This will solve the issue by not enabling those events whose     active_masks are set but are not yet enabled in hw pmu. (CVE-2022-49781)

  - In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix memory leak on     add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop     device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and     then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but     doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by     del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of     them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt     and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable     to lazy-init rq_qos policies because they are optional features and add to hot path overhead once     initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to     lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an     extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit()     become noop's. (CVE-2022-50550)

  - In the Linux kernel, the following vulnerability has been resolved: usb: roles: fix NULL pointer issue     when put module's reference In current design, usb role class driver will get usb_role_switch parent's     module reference after the user get usb_role_switch device and put the reference after the user put the     usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put     the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's     reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find     module by iterating long relations. (CVE-2024-26747)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 13 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-6568 advisory.

    - -------------------------------------------------------------------------     Debian Security Advisory DSA-6568-1                   security@debian.org     https://www.debian.org/security/                     Salvatore Bonaccorso     October 16, 2026                      https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    Package        : linux     CVE ID         : CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315                      CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937                      CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437                      CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467                      CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527                      CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795                      CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832                      CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859                      CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956                      CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002                      CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029                      CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196                      CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243                      CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528                      CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532                      CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537                      CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566                      CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594                      CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615                      CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901                      CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933                      CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939                      CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161                      CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170                      CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174                      CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182                      CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187                      CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191                      CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195                      CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199                      CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203                      CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207                      CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211                      CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215                      CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221                      CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230                      CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234                      CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238                      CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246                      CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251                      CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255                      CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262                      CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266                      CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271                      CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282                      CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291                      CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298                      CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302                      CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308                      CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314                      CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322                      CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327                      CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334                      CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339                      CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344                      CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348                      CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354                      CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360                      CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366                      CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370                      CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377                      CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381                      CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386                      CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409                      CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413                      CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421                      CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426                      CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432                      CVE-2026-99999     Debian Bug     : 1149499 1149564 1150891

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For the stable distribution (trixie), these problems have been fixed in     version 6.12.113-1.

    We recommend that you upgrade your linux packages.

    For the detailed security status of linux please refer to its security     tracker page at:
    https://security-tracker.debian.org/tracker/linux

    Further information about Debian Security Advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://www.debian.org/security/

    Mailing list: debian-security-announce@lists.debian.org

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	名稱	產品	系列	已發布	已更新	嚴重性
350744	Linux Distros 未修補弱點：CVE-2026-98161	Nessus	Misc.	2026/9/25	2026/10/5	medium
364688	AlmaLinux 9.2 [TuxCare] 安全性更新：bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc 多個弱點（ALMALINUX9.2：CLSA-2026：1791741836）	Nessus	Alma Linux Local Security Checks	2026/10/12	2026/10/13	critical
366507	Debian dsa-6568 ： ata-modules-6.12.111+deb13-armmp-di - 安全性更新	Nessus	Debian Local Security Checks	2026/10/16	2026/10/16	medium
350744	Linux Distros 未修补的漏洞：CVE-2026-98161	Nessus	Misc.	2026/9/25	2026/10/5	medium
364688	AlmaLinux 9.2 [TuxCare] 安全更新：bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / 等多个漏洞（ALMALINUX9.2：CLSA-2026：1791741836）	Nessus	Alma Linux Local Security Checks	2026/10/12	2026/10/13	critical
366507	Debian DSA-6568：ata-modules-6.12.111+deb13-armmp-di - 安全更新	Nessus	Debian Local Security Checks	2026/10/16	2026/10/16	medium
350744	Linux Distros のパッチ未適用の脆弱性: CVE-2026-98161	Nessus	Misc.	2026/9/25	2026/10/5	medium
364688	AlmaLinux 9.2 [TuxCare] セキュリティ更新:bpftool/kernel/kernel-64k/kernel-64k-core/kernel-64k-debug/etc 複数の脆弱性(ALMALINUX9.2:CLSA-2026:1791741836)	Nessus	Alma Linux Local Security Checks	2026/10/12	2026/10/13	critical
366507	Debian dsa-6568:ata-modules-6.12.111+deb13-armmp-di - セキュリティ更新	Nessus	Debian Local Security Checks	2026/10/16	2026/10/16	medium
350744	Linux Distros Unpatched Vulnerability : CVE-2026-98161	Nessus	Misc.	2026/9/25	2026/10/5	medium
364688	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1791741836)	Nessus	Alma Linux Local Security Checks	2026/10/12	2026/10/13	critical
366507	Debian dsa-6568 : ata-modules-6.12.111+deb13-armmp-di - security update	Nessus	Debian Local Security Checks	2026/10/16	2026/10/16	medium

偵測

搜尋 Plugin

medium

critical

medium

medium

critical

medium

medium

critical

medium

medium

critical

medium