Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且廠商未提供可用的修補程式。

  - drm/i915/gt：修正配置失敗時sched_engine NULL 解除參照 避免在 execlists_create_virtual（） 中的 intel_context_init（） 之前使用 intel_context_put（），因為當配置失敗時，裡面的 kref_put（） 會導致 IOCTL 路徑上sched_engine NULL 解除參照。使用 Intel 產品安全性確認的 AI 輔助靜態分析發現。（從提交 4f2a12f2d50e9f48227656e4dcbd6423506be31d 中挑選）（CVE-2026-68242）

請注意，Nessus 的判定取決於廠商所報告的套件是否存在。

AlmaLinux 9.2 主機已安裝的套件會受到 TuxCare ALMALINUX9.2：CLSA-2026：1793333110 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：dma-debug: don't call
    __dma_entry_alloc_check_leak() under free_entries_lock __dma_entry_alloc_check_leak() calls into printk -> serial console output (qcom geni) and grabs port->lock under free_entries_lock spin lock, which is a reverse locking dependency chain as qcom_geni IRQ handler can call into dma-debug code and grab free_entries_lock under port->lock. Move __dma_entry_alloc_check_leak() call out of free_entries_lock scope so that we don't acquire serial console's port->lock under it. Trimmed-down lockdep splat: The existing dependency chain (in reverse order) is: -> #2 (free_entries_lock){-.-.}-{2:2}:
    _raw_spin_lock_irqsave+0x60/0x80 dma_entry_alloc+0x38/0x110 debug_dma_map_page+0x60/0xf8 dma_map_page_attrs+0x1e0/0x230 dma_map_single_attrs.constprop.0+0x6c/0xc8 geni_se_rx_dma_prep+0x40/0xcc qcom_geni_serial_isr+0x310/0x510 __handle_irq_event_percpu+0x110/0x244 handle_irq_event_percpu+0x20/0x54 handle_irq_event+0x50/0x88 handle_fasteoi_irq+0xa4/0xcc handle_irq_desc+0x28/0x40 generic_handle_domain_irq+0x24/0x30 gic_handle_irq+0xc4/0x148 do_interrupt_handler+0xa4/0xb0 el1_interrupt+0x34/0x64 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 arch_local_irq_enable+0x4/0x8
    ____do_softirq+0x18/0x24 ... -> #1 (&port_lock_key){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 qcom_geni_serial_console_write+0x184/0x1dc console_flush_all+0x344/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 register_console+0x230/0x38c uart_add_one_port+0x338/0x494 qcom_geni_serial_probe+0x390/0x424 platform_probe+0x70/0xc0 really_probe+0x148/0x280 __driver_probe_device+0xfc/0x114 driver_probe_device+0x44/0x100 __device_attach_driver+0x64/0xdc bus_for_each_drv+0xb0/0xd8
    __device_attach+0xe4/0x140 device_initial_probe+0x1c/0x28 bus_probe_device+0x44/0xb0 device_add+0x538/0x668 of_device_add+0x44/0x50 of_platform_device_create_pdata+0x94/0xc8 of_platform_bus_create+0x270/0x304 of_platform_populate+0xac/0xc4 devm_of_platform_populate+0x60/0xac geni_se_probe+0x154/0x160 platform_probe+0x70/0xc0 ... -> #0 (console_owner){-...}-{0:0}:
    __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc
    _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4 dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm] msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ... Chain exists of: console_owner --> &port_lock_key --> free_entries_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(free_entries_lock);
    lock(&port_lock_key); lock(free_entries_lock); lock(console_owner); *** DEADLOCK *** Call trace:
    dump_backtrace+0xb4/0xf0 show_stack+0x20/0x30 dump_stack_lvl+0x60/0x84 dump_stack+0x18/0x24 print_circular_bug+0x1cc/0x234 check_noncircular+0x78/0xac __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 consol ---truncated--- (CVE-2023-52516)

  - 已解決 Linux 核心中的下列弱點：USB: sisusbvga: Add endpoint checks The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver: ------------[ cut here]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU:
    1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Workqueue: usb_hub_wq hub_event RIP:
    0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282 RAX:
    0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95 RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000 R10:
    0000000080000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6:
    00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline] sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379 sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline] sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline] sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177 sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869 ... The problem was caused by the fact that the driver does not check whether the endpoints it uses are actually present and have the appropriate types. This can be fixed by adding a simple check of the endpoints. (CVE-2023-54213)

  - 已解決 Linux 核心中的下列弱點：net/sched: act_mirred: use the backlog for mirred ingress The test Davide added in commit ca22da2fbd69 (act_mirred: use the backlog for nested calls to mirred ingress) hangs our testing VMs every 10 or so runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by lockdep. The problem as previously described by Davide (see Link) is that if we reverse flow of traffic with the redirect (egress -> ingress) we may reach the same socket which generated the packet. And we may still be holding its socket lock. The common solution to such deadlocks is to put the packet in the Rx backlog, rather than run the Rx path inline. Do that for all egress -> ingress reversals, not just once we started to nest mirred calls. In the past there was a concern that the backlog indirection will lead to loss of error reporting / less accurate stats. But the current workaround does not seem to address the issue. (CVE-2024-26740)

  - 已解決 Linux 核心中的下列弱點：mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index With numa balancing on, when a numa system is running where a numa node doesn't have its local memory so it has no managed zones, the following oops has been observed. It's because wakeup_kswapd() is called with a wrong zone index, -1. Fixed it by checking the index before calling wakeup_kswapd(). > BUG: unable to handle page fault for address: 00000000000033f3 > #PF:
    supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 0 P4D 0 > Oops:
    0000 [#1] PREEMPT SMP NOPTI > CPU: 2 PID: 895 Comm: masim Not tainted 6.6.0-dirty #255 > Hardware name:
    QEMU Standard PC (i440FX + PIIX, 1996), BIOS > rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 > RIP: 0010:wakeup_kswapd (./linux/mm/vmscan.c:7812) > Code: (omitted) > RSP: 0000:ffffc90004257d58 EFLAGS:
    00010286 > RAX: ffffffffffffffff RBX: ffff88883fff0480 RCX: 0000000000000003 > RDX: 0000000000000000 RSI:
    0000000000000000 RDI: ffff88883fff0480 > RBP: ffffffffffffffff R08: ff0003ffffffffff R09: ffffffffffffffff > R10: ffff888106c95540 R11: 0000000055555554 R12: 0000000000000003 > R13: 0000000000000000 R14:
    0000000000000000 R15: ffff88883fff0940 > FS: 00007fc4b8124740(0000) GS:ffff888827c00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00000000000033f3 CR3:
    000000026cc08004 CR4: 0000000000770ee0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > PKRU: 55555554 > Call Trace: > <TASK> > ? __die > ? page_fault_oops > ? __pte_offset_map_lock > ? exc_page_fault > ? asm_exc_page_fault > ? wakeup_kswapd > migrate_misplaced_page > __handle_mm_fault > handle_mm_fault > do_user_addr_fault > exc_page_fault > asm_exc_page_fault > RIP: 0033:0x55b897ba0808 > Code: (omitted) > RSP:
    002b:00007ffeefa821a0 EFLAGS: 00010287 > RAX: 000055b89983acd0 RBX: 00007ffeefa823f8 RCX: 000055b89983acd0 > RDX: 00007fc2f8122010 RSI: 0000000000020000 RDI: 000055b89983acd0 > RBP: 00007ffeefa821a0 R08:
    0000000000000037 R09: 0000000000000075 > R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 > R13: 00007ffeefa82410 R14: 000055b897ba5dd8 R15: 00007fc4b8340000 > </TASK> (CVE-2024-26783)

  - 已解決 Linux 核心中的下列弱點：vfs: Don't evict inode under the inode lru traversing context The inode reclaiming process(See function prune_icache_sb) collects all reclaimable inodes and mark them with I_FREEING flag at first, at that time, other processes will be stuck if they try getting these inodes (See function find_inode_fast), then the reclaiming process destroy the inodes by function dispose_list(). Some filesystems(eg. ext4 with ea_inode feature, ubifs with xattr) may do inode lookup in the inode evicting callback function, if the inode lookup is operated under the inode lru traversing context, deadlock problems may happen. Case 1: In function ext4_evict_inode(), the ea inode lookup could happen if ea_inode feature is enabled, the lookup process will be stuck under the evicting context like this: 1. File A has inode i_reg and an ea inode i_ea 2. getfattr(A, xattr_buf) // i_ea is added into lru // lru->i_ea 3. Then, following three processes running like this: PA PB echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // i_reg is added into lru, lru->i_ea->i_reg prune_icache_sb list_lru_walk_one inode_lru_isolate i_ea->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(i_reg) spin_unlock(&i_reg->i_lock) spin_unlock(lru_lock) rm file A i_reg->nlink = 0 iput(i_reg) // i_reg->nlink is 0, do evict ext4_evict_inode ext4_xattr_delete_inode ext4_xattr_inode_dec_ref_all ext4_xattr_inode_iget ext4_iget(i_ea->i_ino) iget_locked find_inode_fast
    __wait_on_freeing_inode(i_ea) ---- AA deadlock dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&i_ea->i_state) Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file deleting process holds BASEHD's wbuf->io_mutex while getting the xattr inode, which could race with inode reclaiming process(The reclaiming process could try locking BASEHD's wbuf->io_mutex in inode evicting function), then an ABBA deadlock problem would happen as following: 1. File A has inode ia and a xattr(with inode ixa), regular file B has inode ib and a xattr. 2. getfattr(A, xattr_buf) // ixa is added into lru // lru->ixa 3. Then, following three processes running like this: PA PB PC echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // ib and ia are added into lru, lru->ixa->ib->ia prune_icache_sb list_lru_walk_one inode_lru_isolate ixa->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(ib) spin_unlock(&ib->i_lock) spin_unlock(lru_lock) rm file B ib->nlink = 0 rm file A iput(ia) ubifs_evict_inode(ia) ubifs_jnl_delete_inode(ia) ubifs_jnl_write_inode(ia) make_reservation(BASEHD) // Lock wbuf->io_mutex ubifs_iget(ixa->i_ino) iget_locked find_inode_fast
    __wait_on_freeing_inode(ixa) | iput(ib) // ib->nlink is 0, do evict | ubifs_evict_inode | ubifs_jnl_delete_inode(ib) ubifs_jnl_write_inode ABBA deadlock -----make_reservation(BASEHD) dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&ixa->i_state) Fix the possible deadlock by using new inode state flag I_LRU_ISOLATING to pin the inode in memory while inode_lru_isolate(
    ---truncated--- (CVE-2024-45003)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

ID	名稱	產品	系列	已發布	已更新	嚴重性
365463	Ubuntu 26.04 LTS：Linux 核心 (OEM) 弱點 (USN-8889-1)	Nessus	Ubuntu Local Security Checks	2026/10/13	2026/10/13	medium
334384	Linux Distros 未修補弱點：CVE-2026-68242	Nessus	Misc.	2026/8/10	2026/11/6	medium
374135	AlmaLinux 9.2 [TuxCare] 安全性更新：bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc多個弱點（ALMALINUX9.2：CLSA-2026：1793333110）	Nessus	Alma Linux Local Security Checks	2026/10/30	2026/11/2	high
365768	Ubuntu 26.04 LTS：Linux 核心 (Azure) 弱點 (USN-8888-1)	Nessus	Ubuntu Local Security Checks	2026/10/14	2026/10/14	medium
365767	Ubuntu 26.04 LTS : Linux 核心弱點 (USN-8887-1)	Nessus	Ubuntu Local Security Checks	2026/10/14	2026/10/14	medium

偵測

搜尋 Plugin

medium

medium

high

medium

medium