遠端主機上安裝的核心版本早於 5.10.251-248.983。因此，會受到 ALAS2KERNEL-5.10-2026-114 公告中所提及的多個弱點影響。

    在 Linux 核心中，下列弱點已解決：

    HIDuclogic更正 hidinput input_dev 名稱的 devm 裝置參照 (CVE-2023-54207)

    在 Linux 核心中，下列弱點已解決：

    驅動程式核心修正 device_add() 中潛在的 null-ptr-deref (CVE-2023-54321)

    在 Linux 核心中，下列弱點已解決：

    bpf拒絕對指標 ctx 欄位的限制存取 (CVE-2025-38591)

    在 Linux 核心中，下列弱點已解決：

    ksm使用 range-walk 函式跳過 scan_get_next_rmap_item 中的漏洞 (CVE-2025-68211)

    在 Linux 核心中，下列弱點已解決：

    bpf不讓 BPF 測試基礎結構將無效的 GSO 類型發出至堆疊 (CVE-2025-68725)

    在 Linux 核心中，下列弱點已解決：

    btrfs修正 wait_current_trans() 中因忽略的交易類型而發生的鎖死 (CVE-2025-71194)

    在 Linux 核心中，下列弱點已解決：scsi: qla2xxx: Free sp in error path to fix system crash System crash seen during load/unload test in a loop, [61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X. [61110.467494] ============================================================================= [61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown() [61110.467501] ----------------------------------------------------------------------------- [61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467515] Call Trace: [61110.467516] <TASK> [61110.467519] dump_stack_lvl+0x34/0x48 [61110.467526] slab_err.cold+0x53/0x67 [61110.467534] __kmem_cache_shutdown+0x16e/0x320 [61110.467540] kmem_cache_destroy+0x51/0x160 [61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467607] ?
    __do_sys_delete_module.constprop.0+0x178/0x280 [61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [61110.467616] ? do_syscall_64+0x5c/0x90 [61110.467619] ? exc_page_fault+0x62/0x150 [61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [61110.467626] </TASK> [61110.467627] Disabling lock debugging due to kernel taint [61110.467635] Object 0x0000000026f7e6e6 @offset=16000 [61110.467639] ------------[ cut here ]------------ [61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160 [61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160 [61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 [61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282 [61110.467727] RAX: 0000000000000000 RBX:
    ffffffffc0d9a860 RCX: 0000000000000027 [61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI:
    ffff8fd5ff9598a0 [61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7 [61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000 [61110.467731] R13:
    0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000 [61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0:
    0000000080050033 [61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0 [61110.467736] PKRU: 55555554 [61110.467737] Call Trace: [61110.467738] <TASK> [61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280 Free sp in the error path to fix the crash. (CVE-2025-71232)

    在 Linux 核心中，下列弱點已解決：scsi: qla2xxx: Delay module unload while fabric scan in progress System crash seen during load/unload test in a loop. [105954.384919] RBP:
    ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086 [105954.384920] R10: 000000000000000f R11:
    ffffa31240904be5 R12: ffff914605f868e0 [105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15:
    00000000ddb7c000 [105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000 [105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0 [105954.384928] PKRU: 55555554 [105954.384929] Call Trace: [105954.384931] <IRQ> [105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx] [105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx] [105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx] [105954.384999] ? __wake_up_common+0x80/0x190 [105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx] [105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx] [105954.385040] ? __handle_irq_event_percpu+0x3d/0x190 [105954.385044] ? handle_irq_event+0x58/0xb0 [105954.385046] ? handle_edge_irq+0x93/0x240 [105954.385050] ?
    __common_interrupt+0x41/0xa0 [105954.385055] ? common_interrupt+0x3e/0xa0 [105954.385060] ? asm_common_interrupt+0x22/0x40 The root cause of this was that there was a free (dma_free_attrs) in the interrupt context. There was a device discovery/fabric scan in progress. A module unload was issued which set the UNLOADING flag. As part of the discovery, after receiving an interrupt a work queue was scheduled (which involved a work to be queued). Since the UNLOADING flag is set, the work item was not allocated and the mapped memory had to be freed. The free occurred in interrupt context leading to system crash. Delay the driver unload until the fabric scan is complete to avoid the crash. (CVE-2025-71235)

    在 Linux 核心中，下列弱點已解決：scsi: qla2xxx: Validate sp before freeing associated memory System crash with the following signature [154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete [154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3. [154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5. [154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed - 0078 0080 0000.
    [154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed - 0078 00a0 0000. [154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate). [154565.552760] qla2xxx [0000:b0:00.1]-11a2:2:
    FEC=enabled (data rate). [154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [154565.553080] #PF: supervisor read access in kernel mode [154565.553082] #PF: error_code(0x0000) - not-present page [154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0 [154565.553089] Oops: 0000 1 PREEMPT SMP PTI [154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump:
    loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1 [154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024 [154565.553097] RIP:
    0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b [154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286 [154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002 [154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47 [154565.553148] RBP:
    0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a [154565.553150] R10: 0000000000000000 R11:
    000000000000000f R12: ffff8ec2cf0908d0 [154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15:
    ffff8ec2cf084000 [154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000 [154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0 [154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [154565.553159] PKRU: 55555554 [154565.553160] Call Trace: [154565.553162] <TASK> [154565.553165] ? show_trace_log_lvl+0x1c4/0x2df [154565.553172] ? show_trace_log_lvl+0x1c4/0x2df [154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553215] ?
    __die_body.cold+0x8/0xd [154565.553218] ? page_fault_oops+0x134/0x170 [154565.553223] ? snprintf+0x49/0x70 [154565.553229] ? exc_page_fault+0x62/0x150 [154565.553238] ? asm_exc_page_fault+0x22/0x30 Check for sp being non NULL before freeing any associated memory (CVE-2025-71236)

    在 Linux 核心中，下列弱點已解決：nilfs2: Fix potential block overflow that cause system hang When a user executes the FITRIM command, an underflow can occur when calculating nblocks if end_block is too small. Since nblocks is of type sector_t, which is u64, a negative nblocks value will become a very large positive integer. This ultimately leads to the block layer function
    __blkdev_issue_discard() taking an excessively long time to process the bio chain, and the ns_segctor_sem lock remains held for a long period. This prevents other tasks from acquiring the ns_segctor_sem lock, resulting in the hang reported by syzbot in [1]. If the ending block is too small, typically if it is smaller than 4KiB range, depending on the usage of the segment 0, it may be possible to attempt a discard request beyond the device size causing the hang. Exiting successfully and assign the discarded size (0 in this case) to range->len. Although the start and len values in the user input range are too small, a conservative strategy is adopted here to safely ignore them, which is equivalent to a no-op; it will not perform any trimming and will not throw an error. [1] task:segctord state:D stack:28968 pid:6093 tgid:6093 ppid:2 task_flags:0x200040 flags:0x00080000 Call Trace: rwbase_write_lock+0x3dd/0x750 kernel/locking/rwbase_rt.c:272 nilfs_transaction_lock+0x253/0x4c0 fs/nilfs2/segment.c:357 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2569 [inline] nilfs_segctor_thread+0x6ec/0xe00 fs/nilfs2/segment.c:2684 [ryusuke: corrected part of the commit message about the consequences] (CVE-2025-71237)

    在 Linux 核心中，下列弱點已解決：scsi: qla2xxx: Fix bsg_done() causing double free Kernel panic observed on system, [5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000 [5353358.825194] #PF: supervisor write access in kernel mode [5353358.825195] #PF: error_code(0x0002) - not-present page [5353358.825196] PGD 100006067 P4D 0 [5353358.825198] Oops:
    0002 [#1] PREEMPT SMP NOPTI [5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1 [5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025 [5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10 [5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246 [5353358.825212] RAX: ff5f5e897b024000 RBX:
    0000000000007090 RCX: 0000000000001000 [5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI:
    ff5f5e897b024000 [5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000 [5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090 [5353358.825216] R13:
    ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000 [5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000 [5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0:
    0000000080050033 [5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0 [5353358.825221] PKRU: 55555554 [5353358.825222] Call Trace: [5353358.825223] <TASK> [5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825232] ? sg_copy_buffer+0xc8/0x110 [5353358.825236] ? __die_body.cold+0x8/0xd [5353358.825238] ? page_fault_oops+0x134/0x170 [5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110 [5353358.825244] ? exc_page_fault+0xa8/0x150 [5353358.825247] ? asm_exc_page_fault+0x22/0x30 [5353358.825252] ? memcpy_erms+0x6/0x10 [5353358.825253] sg_copy_buffer+0xc8/0x110 [5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx] [5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx] Most routines in qla_bsg.c call bsg_done() only for success cases. However a few invoke it for failure case as well leading to a double free. Validate before calling bsg_done(). (CVE-2025-71238)

    在 Linux 核心中，下列弱點已解決：

    net/schedsch_qfq不釋放 qfq_change_class() 中現有的類別 (CVE-2026-22999)

    在 Linux 核心中，下列弱點已解決：

    macvlan修正 macvlan_forward_source() 中可能的 UAF (CVE-2026-23001)

    在 Linux 核心中，下列弱點已解決：

    ip6_tunnel使用 __ip6_tnl_rcv() 中的 skb_vlan_inet_prepare() (CVE-2026-23003)

    在 Linux 核心中，下列弱點已解決：

    ipv4ip_gre使 ipgre_header() 健全 (CVE-2026-23011)

    在 Linux 核心中，下列弱點已解決：

    pnfs/flexfiles修正 nfs4_ff_alloc_deviceid_node() 中的記憶體洩漏 (CVE-2026-23038)

    在 Linux 核心中，下列弱點已解決：

    cryptoauthencesn - 拒絕太短的 AAD (assoclen<8) 無法符合 ESP/ESN 規格 (CVE-2026-23060)

    在 Linux 核心中，下列弱點已解決：

    regmap修正 hwspinlock irqsave 常式中的爭用情形 (CVE-2026-23071)

    在 Linux 核心中，下列弱點已解決：

    net/sched強制 teql 只能作為 root qdisc 使用 (CVE-2026-23074)

    在 Linux 核心中，下列弱點已解決：

    fou不允許 FOU_ATTR_IPPROTO 為 0。 (CVE-2026-23083)

    在 Linux 核心中，下列弱點已解決：

    irqchip/gic-v3-its避免截斷記憶體位址 (CVE-2026-23085)

    在 Linux 核心中，下列弱點已解決：

    gue使用內部 IP 通訊協定 0 修正 skb memleak。(CVE-2026-23095)

    在 Linux 核心中，下列弱點已解決：

    migrate更正 hugetlb 檔案作品集的鎖定順序 (CVE-2026-23097)

    在 Linux 核心中，下列弱點已解決：

    ledsled-class僅在 leds_list 完全準備就緒時將 LED 新增至 leds_list (CVE-2026-23101)

    在 Linux 核心中，下列弱點已解決：

    ipvlan使 addrs_lock 依據連接埠 (CVE-2026-23103)

    在 Linux 核心中，下列弱點已解決：

    net/schedqfq使用 cl_is_active 判斷類別在 qfq_rm_from_ag 中是否處於作用中 (CVE-2026-23105)

    在 Linux 核心中，下列弱點已解決：

    scsi核心當最終完成項目相互爭用時喚醒錯誤處理常式 (CVE-2026-23110)

    在 Linux 核心中，下列弱點已解決：

    bonding提供 net 指標給 __skb_flow_dissect() (CVE-2026-23119)

    在 Linux 核心中，下列弱點已解決：

    sctp將 SCTP_CMD_ASSOC_SHKEY 移到 SCTP_CMD_PEER_INIT 之後 (CVE-2026-23125)

    在 Linux 核心中，下列弱點已解決：

    ext4修正 ext4_xattr_inode_update_ref 中的 iloc.bh 洩漏 (CVE-2026-23145)

    在 Linux 核心中，下列弱點已解決：

    rocker修正 rocker_world_port_post_fini() 中的記憶體洩漏 (CVE-2026-23164)

    在 Linux 核心中，下列弱點已解決：

    scsi目標iscsi修正 iscsit_dec_session_usage_count() 中的釋放後使用錯誤 (CVE-2026-23193)

    在 Linux 核心中，下列弱點已解決：

    KVM取消指派 irqfd 時不破壞 irqfd 路由類型 (CVE-2026-23198)

    在 Linux 核心中，下列弱點已解決：

    macvlan修正 macvlan_common_newlink() 中的錯誤復原 (CVE-2026-23209)

    在 Linux 核心中，下列弱點已解決：

    scsi目標iscsi修正 iscsit_dec_conn_usage_count() 中的釋放後使用 (CVE-2026-23216)

    在 Linux 核心中，下列弱點已解決：crypto: virtio - Add spinlock protection with virtqueue notification When VM boots with one virtio-crypto PCI device and builtin backend, run openssl benchmark command with multiple processes, such as openssl speed -evp aes-128-cbc
    -engine afalg -seconds 10 -multi 32 openssl processes will hangup and there is error reported like this:
    virtio_crypto virtio0: dataq.0:id 3 is not a head! It seems that the data virtqueue need protection when it is handled for virtio done notification. If the spinlock protection is added in virtcrypto_done_task(), openssl benchmark with multiple processes works well. (CVE-2026-23229)

    在 Linux 核心中，下列弱點已解決：romfs: check sb_set_blocksize() return value romfs_fill_super() ignores the return value of sb_set_blocksize(), which can fail if the requested block size is incompatible with the block device's configuration. This can be triggered by setting a loop device's block size larger than PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs filesystem on that device. When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the device has logical_block_size=32768, bdev_validate_blocksize() fails because the requested size is smaller than the device's logical block size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and continues mounting. The superblock's block size remains at the device's logical block size (32768). Later, when sb_bread() attempts I/O with this oversized block size, it triggers a kernel BUG in folio_set_bh():
    kernel BUG at fs/buffer.c:1582! BUG_ON(size > PAGE_SIZE); Fix by checking the return value of sb_set_blocksize() and failing the mount with -EINVAL if it returns 0. (CVE-2026-23238)

    在 Linux 核心中，下列弱點已解決：

    netliquidio修正 VF setup_nic_devices() 清理中的差一錯誤 (CVE-2026-23256)

    在 Linux 核心中，下列弱點已解決：

    netliquidio修正 PF setup_nic_devices() 清理中的差一錯誤 (CVE-2026-23257)

    在 Linux 核心中，下列弱點已解決：

    net Liquidio在佇列設定前初始化 netdev 指標 (CVE-2026-23258)

Tenable 已直接從所測試產品的安全公告擷取前置描述區塊。

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且供應商未提供可用的修補程式。

  - netLiquidio修正 VF setup_nic_devices() 清理中的差一錯誤在 setup_nic_devices() 中失敗時初始化迴圈會跳至標籤 setup_nic_dev_free。目前的 while(i--) 清理迴圈會略過失敗的索引 i造成記憶體洩漏。透過變更迴圈來從目前的索引 i 向下迭代至 0 來修正此問題。僅限編譯測試。使用程式碼檢閱時發現的問題。 (CVE-2026-23256)

請注意，Nessus 的判定取決於廠商所報告的套件是否存在。

ID	名稱	產品	系列	已發布	已更新	嚴重性
303103	Amazon Linux 2核心 --advisory ALAS2KERNEL-5。10-2026-114 (ALASKERNEL-5.10-2026-114)	Nessus	Amazon Linux Local Security Checks	2026/3/19	2026/3/31	high
302950	Linux Distros 未修補的弱點：CVE-2026-23256	Nessus	Misc.	2026/3/18	2026/3/24	medium

偵測

搜尋 Plugin

high

medium