因此，會受到 ALAS2023-2026-1491 公告中所提及的多個弱點影響。

    在 Linux 核心中，下列弱點已解決：

    clkmediatek修正 of_iomap 記憶體洩漏 (CVE-2023-53424)

    在 Linux 核心中，下列弱點已解決：

    wificfg80211在 cfg80211_check_and_end_cac() 中新增遺漏的鎖定 (CVE-2025-38643)

    在 Linux 核心中，下列弱點已解決：

    ACPIAPEI如果同步記憶體錯誤未復原則將 SIGBUS 傳送至目前工作 (CVE-2025-39763)

    在 Linux 核心中，下列弱點已解決：

    devlinkratedevl_rate_nodes_destroy 中取消設定父項指標 (CVE-2025-40251)

    在 Linux 核心中，下列弱點已解決：

    btrfs修正 btrfs_clear_space_info_full() 中爭用的 bitfield 寫入 (CVE-2025-68358)

    在 Linux 核心中，下列弱點已解決：

    mptcp確保在 disconnect() 時重設內容 (CVE-2025-71144)

    在 Linux 核心中，下列弱點已解決：scsi: qla2xxx: Free sp in error path to fix system crash System crash seen during load/unload test in a loop, [61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X. [61110.467494] ============================================================================= [61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown() [61110.467501] ----------------------------------------------------------------------------- [61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467515] Call Trace: [61110.467516] <TASK> [61110.467519] dump_stack_lvl+0x34/0x48 [61110.467526] slab_err.cold+0x53/0x67 [61110.467534] __kmem_cache_shutdown+0x16e/0x320 [61110.467540] kmem_cache_destroy+0x51/0x160 [61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467607] ?
    __do_sys_delete_module.constprop.0+0x178/0x280 [61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [61110.467616] ? do_syscall_64+0x5c/0x90 [61110.467619] ? exc_page_fault+0x62/0x150 [61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [61110.467626] </TASK> [61110.467627] Disabling lock debugging due to kernel taint [61110.467635] Object 0x0000000026f7e6e6 @offset=16000 [61110.467639] ------------[ cut here ]------------ [61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160 [61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160 [61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 [61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282 [61110.467727] RAX: 0000000000000000 RBX:
    ffffffffc0d9a860 RCX: 0000000000000027 [61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI:
    ffff8fd5ff9598a0 [61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7 [61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000 [61110.467731] R13:
    0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000 [61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0:
    0000000080050033 [61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0 [61110.467736] PKRU: 55555554 [61110.467737] Call Trace: [61110.467738] <TASK> [61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280 Free sp in the error path to fix the crash. (CVE-2025-71232)

    在 Linux 核心中，下列弱點已解決：PCI: endpoint: Avoid creating sub-groups asynchronously The asynchronous creation of sub-groups by a delayed work could lead to a NULL pointer dereference when the driver directory is removed before the work completes. The crash can be easily reproduced with the following commands: # cd /sys/kernel/config/pci_ep/functions/pci_epf_test # for i in {1..20}; do mkdir test && rmdir test; done BUG: kernel NULL pointer dereference, address:
    0000000000000088 ... Call Trace: configfs_register_group+0x3d/0x190 pci_epf_cfs_work+0x41/0x110 process_one_work+0x18f/0x350 worker_thread+0x25a/0x3a0 Fix this issue by using configfs_add_default_group() API which does not have the deadlock problem as configfs_register_group() and does not require the delayed work handler. [mani: slightly reworded the description and added stable list] (CVE-2025-71233)

    在 Linux 核心中，下列弱點已解決：scsi: qla2xxx: Delay module unload while fabric scan in progress System crash seen during load/unload test in a loop. [105954.384919] RBP:
    ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086 [105954.384920] R10: 000000000000000f R11:
    ffffa31240904be5 R12: ffff914605f868e0 [105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15:
    00000000ddb7c000 [105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000 [105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0 [105954.384928] PKRU: 55555554 [105954.384929] Call Trace: [105954.384931] <IRQ> [105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx] [105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx] [105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx] [105954.384999] ? __wake_up_common+0x80/0x190 [105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx] [105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx] [105954.385040] ? __handle_irq_event_percpu+0x3d/0x190 [105954.385044] ? handle_irq_event+0x58/0xb0 [105954.385046] ? handle_edge_irq+0x93/0x240 [105954.385050] ?
    __common_interrupt+0x41/0xa0 [105954.385055] ? common_interrupt+0x3e/0xa0 [105954.385060] ? asm_common_interrupt+0x22/0x40 The root cause of this was that there was a free (dma_free_attrs) in the interrupt context. There was a device discovery/fabric scan in progress. A module unload was issued which set the UNLOADING flag. As part of the discovery, after receiving an interrupt a work queue was scheduled (which involved a work to be queued). Since the UNLOADING flag is set, the work item was not allocated and the mapped memory had to be freed. The free occurred in interrupt context leading to system crash. Delay the driver unload until the fabric scan is complete to avoid the crash. (CVE-2025-71235)

    在 Linux 核心中，下列弱點已解決：scsi: qla2xxx: Validate sp before freeing associated memory System crash with the following signature [154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete [154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3. [154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5. [154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed - 0078 0080 0000.
    [154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed - 0078 00a0 0000. [154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate). [154565.552760] qla2xxx [0000:b0:00.1]-11a2:2:
    FEC=enabled (data rate). [154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [154565.553080] #PF: supervisor read access in kernel mode [154565.553082] #PF: error_code(0x0000) - not-present page [154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0 [154565.553089] Oops: 0000 1 PREEMPT SMP PTI [154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump:
    loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1 [154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024 [154565.553097] RIP:
    0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b [154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286 [154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002 [154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47 [154565.553148] RBP:
    0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a [154565.553150] R10: 0000000000000000 R11:
    000000000000000f R12: ffff8ec2cf0908d0 [154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15:
    ffff8ec2cf084000 [154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000 [154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0 [154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [154565.553159] PKRU: 55555554 [154565.553160] Call Trace: [154565.553162] <TASK> [154565.553165] ? show_trace_log_lvl+0x1c4/0x2df [154565.553172] ? show_trace_log_lvl+0x1c4/0x2df [154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553215] ?
    __die_body.cold+0x8/0xd [154565.553218] ? page_fault_oops+0x134/0x170 [154565.553223] ? snprintf+0x49/0x70 [154565.553229] ? exc_page_fault+0x62/0x150 [154565.553238] ? asm_exc_page_fault+0x22/0x30 Check for sp being non NULL before freeing any associated memory (CVE-2025-71236)

    在 Linux 核心中，下列弱點已解決：nilfs2: Fix potential block overflow that cause system hang When a user executes the FITRIM command, an underflow can occur when calculating nblocks if end_block is too small. Since nblocks is of type sector_t, which is u64, a negative nblocks value will become a very large positive integer. This ultimately leads to the block layer function
    __blkdev_issue_discard() taking an excessively long time to process the bio chain, and the ns_segctor_sem lock remains held for a long period. This prevents other tasks from acquiring the ns_segctor_sem lock, resulting in the hang reported by syzbot in [1]. If the ending block is too small, typically if it is smaller than 4KiB range, depending on the usage of the segment 0, it may be possible to attempt a discard request beyond the device size causing the hang. Exiting successfully and assign the discarded size (0 in this case) to range->len. Although the start and len values in the user input range are too small, a conservative strategy is adopted here to safely ignore them, which is equivalent to a no-op; it will not perform any trimming and will not throw an error. [1] task:segctord state:D stack:28968 pid:6093 tgid:6093 ppid:2 task_flags:0x200040 flags:0x00080000 Call Trace: rwbase_write_lock+0x3dd/0x750 kernel/locking/rwbase_rt.c:272 nilfs_transaction_lock+0x253/0x4c0 fs/nilfs2/segment.c:357 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2569 [inline] nilfs_segctor_thread+0x6ec/0xe00 fs/nilfs2/segment.c:2684 [ryusuke: corrected part of the commit message about the consequences] (CVE-2025-71237)

    在 Linux 核心中，下列弱點已解決：scsi: qla2xxx: Fix bsg_done() causing double free Kernel panic observed on system, [5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000 [5353358.825194] #PF: supervisor write access in kernel mode [5353358.825195] #PF: error_code(0x0002) - not-present page [5353358.825196] PGD 100006067 P4D 0 [5353358.825198] Oops:
    0002 [#1] PREEMPT SMP NOPTI [5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1 [5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025 [5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10 [5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246 [5353358.825212] RAX: ff5f5e897b024000 RBX:
    0000000000007090 RCX: 0000000000001000 [5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI:
    ff5f5e897b024000 [5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000 [5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090 [5353358.825216] R13:
    ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000 [5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000 [5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0:
    0000000080050033 [5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0 [5353358.825221] PKRU: 55555554 [5353358.825222] Call Trace: [5353358.825223] <TASK> [5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825232] ? sg_copy_buffer+0xc8/0x110 [5353358.825236] ? __die_body.cold+0x8/0xd [5353358.825238] ? page_fault_oops+0x134/0x170 [5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110 [5353358.825244] ? exc_page_fault+0xa8/0x150 [5353358.825247] ? asm_exc_page_fault+0x22/0x30 [5353358.825252] ? memcpy_erms+0x6/0x10 [5353358.825253] sg_copy_buffer+0xc8/0x110 [5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx] [5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx] Most routines in qla_bsg.c call bsg_done() only for success cases. However a few invoke it for failure case as well leading to a double free. Validate before calling bsg_done(). (CVE-2025-71238)

    在 Linux 核心中，下列弱點已解決：

    mptcp修正 mptcp_pm_nl_flush_addrs_doit() 中的爭用 (CVE-2026-23169)

    在 Linux 核心中，下列弱點已解決：bus: fsl-mc: fix use-after-free in driver_override_show() The driver_override_show() function reads the driver_override string without holding the device_lock. However, driver_override_store() uses driver_set_override(), which modifies and frees the string while holding the device_lock. This can result in a concurrent use-after-free if the string is freed by the store function while being read by the show function. Fix this by holding the device_lock around the read operation. (CVE-2026-23221)

    在 Linux 核心中，下列弱點已解決：crypto: omap - Allocate OMAP_CRYPTO_FORCE_COPY scatterlists correctly The existing allocation of scatterlists in omap_crypto_copy_sg_lists() was allocating an array of scatterlist pointers, not scatterlist objects, resulting in a 4x too small allocation. Use sizeof(*new_sg) to get the correct object size.
    (CVE-2026-23222)

    在 Linux 核心中，下列弱點已解決：smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection() On kthread_run() failure in ksmbd_tcp_new_connection(), the transport is freed via free_transport(), which does not decrement active_num_conn, leaking this counter.
    Replace free_transport() with ksmbd_tcp_disconnect(). (CVE-2026-23228)

    在 Linux 核心中，下列弱點已解決：crypto: virtio - Add spinlock protection with virtqueue notification When VM boots with one virtio-crypto PCI device and builtin backend, run openssl benchmark command with multiple processes, such as openssl speed -evp aes-128-cbc
    -engine afalg -seconds 10 -multi 32 openssl processes will hangup and there is error reported like this:
    virtio_crypto virtio0: dataq.0:id 3 is not a head! It seems that the data virtqueue need protection when it is handled for virtio done notification. If the spinlock protection is added in virtcrypto_done_task(), openssl benchmark with multiple processes works well. (CVE-2026-23229)

    在 Linux 核心中，下列弱點已解決：smb: client: split cached_fid bitfields to avoid shared-byte RMW races is_open, has_lease and on_list are stored in the same bitfield byte in struct cached_fid but are updated in different code paths that may run concurrently. Bitfield assignments generate byte read-modify-write operations (e.g. `orb $mask, addr` on x86_64), so updating one flag can restore stale values of the others. A possible interleaving is: CPU1: load old byte (has_lease=1, on_list=1) CPU2: clear both flags (store 0) CPU1: RMW store (old | IS_OPEN) -> reintroduces cleared bits To avoid this class of races, convert these flags to separate bool fields. (CVE-2026-23230)

    在 Linux 核心中，下列弱點已解決：romfs: check sb_set_blocksize() return value romfs_fill_super() ignores the return value of sb_set_blocksize(), which can fail if the requested block size is incompatible with the block device's configuration. This can be triggered by setting a loop device's block size larger than PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs filesystem on that device. When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the device has logical_block_size=32768, bdev_validate_blocksize() fails because the requested size is smaller than the device's logical block size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and continues mounting. The superblock's block size remains at the device's logical block size (32768). Later, when sb_bread() attempts I/O with this oversized block size, it triggers a kernel BUG in folio_set_bh():
    kernel BUG at fs/buffer.c:1582! BUG_ON(size > PAGE_SIZE); Fix by checking the return value of sb_set_blocksize() and failing the mount with -EINVAL if it returns 0. (CVE-2026-23238)

    在 Linux 核心中，下列弱點已解決：

    macvlan在 macvlan_common_newlink() 錯誤路徑中觀察 RCU 寬限期 (CVE-2026-23273)

Tenable 已直接從所測試產品的安全公告擷取前置描述區塊。

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

遠端 Debian 12 主機上安裝的多個套件受到 dsa-6163 公告中提及的多個弱點影響。

    - ------------------------------------------------- ------------------------------------ Debian 安全公告 DSA-6163-1 security@debian.org https://www.debian.org/security/Salvatore Bonaccorso 2026 年 3 月 12 日 https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    套件：linux CVE ID：CVE-2023-53424 CVE-2024-26822 CVE-2024-57895 CVE-2025-22026 CVE-2025-23155 CVE-2025-37786 CVE-2025-37822 CVE-2025-37920 CVE-2025-38201 CVE-2025-38643 CVE-2025-39763 CVE-2025-40082 CVE-2025-40251 CVE-2025-68358 CVE-2025-71089 CVE-2025-71144 CVE-2025-71220 CVE-2025-71222 CVE-2025-71224 CVE-2025-71232 CVE-2025-71233 CVE-2025-71235 CVE-2025-71236 CVE-2025-71237 CVE-2025-71238 CVE-2026-23111 CVE-2026-23112 CVE-2026-23169 CVE-2026-23176 CVE-2026-23178 CVE-2026-23180 CVE-2026-23182 CVE-2026-23187 CVE-2026-23190 CVE-2026-23193 CVE-2026-23198 CVE-2026-23202 CVE-2026-23205 CVE-2026-23206 CVE-2026-23209 CVE-2026-23216 CVE-2026-23220 CVE-2026-23221 CVE-2026-23222 CVE-2026-23228 CVE-2026-23229 CVE-2026-23230 CVE-2026-23234 CVE-2026-23235 CVE-2026-23236 CVE-2026-23237 CVE-2026-23238

    在 Linux 核心中發現數個弱點，這些弱點可能會導致特權提升、拒絕服務或資訊洩漏。

    Qualys Threat Research Unit (TRU) 在 Apparmor 中發現了多個弱點。如需詳細資訊，請參閱 Qualys 公告：https://www.qualys.com/2026/03/10/crack-armor.txt

    針對舊的穩定發行版本 (bookworm)，已在第 6.1.164-1 版中修正這些問題。

    建議您升級 linux 套件。

    如需有關 linux 安全性狀態的詳細資訊，請參閱其安全追蹤頁面：
    https://security-tracker.debian.org/tracker/linux

    有關 Debian 安全公告、如何將這些更新套用至您的系統以及常見問題的詳細資訊，請參閱：https://www.debian.org/security/

    郵寄清單：debian-security-announce@lists.debian.org

Tenable 已直接從 Debian 安全公告擷取前置描述區塊。

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

遠端 Debian 11 主機上安裝的多個套件受到 dla-4499 公告中提及的多個弱點影響。

    - ------------------------------------------------- ------------------------------------ Debian LTS 公告 DLA-4499-1 debian-lts@lists.debian.org https://www.debian.org/lts/security/Ben Hutchings 2026 年 3 月 13 日 https://wiki.debian.org/LTS-------------------------------------------------------------------------

    套件：linux-6.1 版本：6.1.164-1~deb11u1 CVE ID：CVE-2023-53424 CVE-2024-26822 CVE-2024-57895 CVE-2025-22026 CVE-2025-23155 CVE-2025-37786 CVE-2025-37822 CVE-2025-37920 CVE-2025-38201 CVE-2025-38643 CVE-2025-39763 CVE-2025-40082 CVE-2025-40251 CVE-2025-68358 CVE-2025-71089 CVE-2025-71144 CVE-2025-71220 CVE-2025-71222 CVE-2025-71224 CVE-2025-71232 CVE-2025-71233 CVE-2025-71235 CVE-2025-71236 CVE-2025-71237 CVE-2025-71238 CVE-2026-23111 CVE-2026-23112 CVE-2026-23169 CVE-2026-23176 CVE-2026-23178 CVE-2026-23180 CVE-2026-23182 CVE-2026-23187 CVE-2026-23190 CVE-2026-23193 CVE-2026-23198 CVE-2026-23202 CVE-2026-23205 CVE-2026-23206 CVE-2026-23209 CVE-2026-23216 CVE-2026-23220 CVE-2026-23221 CVE-2026-23222 CVE-2026-23228 CVE-2026-23229 CVE-2026-23230 CVE-2026-23234 CVE-2026-23235 CVE-2026-23236 CVE-2026-23237 CVE-2026-23238 Debian 缺陷：1127597

    在 Linux 核心中發現數個弱點，這些弱點可能會導致特權提升、拒絕服務或資訊洩漏。

    Qualys Threat Research Unit (TRU) 在 Apparmor 中發現了多個弱點。如需詳細資訊，請參閱 Qualys 公告：https://www.qualys.com/2026/03/10/crack-armor.txt

    針對 Debian 11 bullseye，已在 6.1.164-1~deb11u1 版本中修正這些問題。此版本也修正了先前更新中的迴歸問題。還包含穩定版更新 6.1.163 和 6.1.164 中的許多錯誤修正。

    建議您升級 linux-6.1 套件。

    如需有關 linux-6.1 安全性狀態的詳細資訊，請參閱其安全追蹤頁面:
    https://security-tracker.debian.org/tracker/linux-6.1

    有關 Debian LTS 安全公告、如何將這些更新套用至您的系統以及常見問題的詳細資訊，請參閱: https://wiki.debian.org/LTSAttachment:signature.ascDescription: PGP 簽章

Tenable 已直接從 Debian 安全公告擷取前置描述區塊。

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且廠商未提供可用的修補程式。

  - clkmediatek修正 of_iomap 記憶體洩漏 Smatch 報告 drivers/clk/mediatek/clk-mtk.c:583 mtk_clk_simple_probe() 警告 of_iomap() 的「基底」未在第 496 行釋放。在 linux-next 中也會發現此問題。在 mtk_clk_simple_probe() 中如果 clk_data 不存在在處理錯誤時不會釋放基底這可能會造成洩漏。因此應在此處新增 free_base 以版本基底。 (CVE-2023-53424)

請注意，Nessus 的判定取決於廠商所報告的套件是否存在。

ID	名稱	產品	系列	已發布	已更新	嚴重性
304299	Amazon Linux 2023：bpftool、kernel、kernel-devel (ALAS2023-2026-1491)	Nessus	Amazon Linux Local Security Checks	2026/3/30	2026/4/1	high
302008	Debian dsa-6163：affs-modules-6.1.0-43-4kc-malta-di - 安全性更新	Nessus	Debian Local Security Checks	2026/3/12	2026/3/20	critical
302188	Debian dla-4499：linux-config-6.1 - 安全性更新	Nessus	Debian Local Security Checks	2026/3/13	2026/3/20	critical
265524	Linux Distros 未修補的弱點：CVE-2023-53424	Nessus	Misc.	2025/9/19	2026/5/13	medium

偵測

搜尋 Plugin

high

critical

critical

medium