Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且供應商未提供可用的修補程式。

  - USB： gadget：修正 usb 配置切換時的釋放後使用 在將 USB 配置從 rndis 切換到其他配置的過程中，如果硬體不支援 ->pullup 回呼，或硬體遇到低機率故障，兩者都可能導致 ->pullup 回呼失敗，進而導致系統錯誤（釋放後使用）。無論硬體的行為如何，小工具驅動程式有時都需要卸載。分析如下： ======================================================================= （1） 寫入 /config/usb_gadget/g1/UDC 無 gether_disconnect+0x2c/0x1f8 rndis_disable+0x4c/0x74 composite_disconnect+0x74/0xb0 configfs_composite_disconnect+0x60/0x7c usb_gadget_disconnect+0x70/0x124 usb_gadget_unregister_driver+0xc8/0x1d8 gadget_dev_desc_UDC_store+0xec/0x1e4 （2） rm /config/usb_gadget/g1/configs/b.1/f1 rndis_deregister+0x28/0x54 rndis_free+0x44/0x7c usb_put_function+0x14/0x1c config_usb_cfg_unlink+0xc4/0xe0 configfs_unlink+0x124/0x1c8 vfs_unlink+0x114/0x1dc （3） rmdir /config/usb_gadget/g1/functions/rndis.gs4 panic+0x1fc/0x3d0 do_page_fault+0xa8/0x46c do_mem_abort+0x3c/0xac el1_sync_handler+0x40/0x78 0xffffff801138f880 rndis_close+0x28/0x34 eth_stop+0x74/0x110 dev_close_many+0x48/0x194 rollback_registered_many+0x118/0x814 unregister_netdev+0x20/0x30 gether_cleanup+0x1c/0x38 rndis_attr_release+0xc/0x14kref_put+0x74/0xb8 configfs_rmdir+0x314/0x374 如果 gadget->ops->pullup（） 傳回錯誤，則會呼叫函數 rndis_close（），則會導致釋放後使用問題。
    ======================================================================= （CVE-2022-50704）

請注意，Nessus 的判定取決於廠商所報告的套件是否存在。

AlmaLinux 9.2 主機已安裝的套件會受到 TuxCare ALMALINUX9.2：CLSA-2026：1783362244 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：extcon: Modify extcon device to be created after driver data is set Currently, someone can invoke the sysfs such as state_show() intermittently before dev_set_drvdata() is done. And it can be a cause of kernel Oops because of edev is Null at that time. So modified the driver registration to after setting drviver data. - Oops's backtrace.
    Backtrace: [<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show) [<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show) [<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show) [<c02c4938>] (kernfs_seq_show) from [<c025e2a0>] (seq_read) [<c025e11c>] (seq_read) from [<c02c50a0>] (kernfs_fop_read) [<c02c5064>] (kernfs_fop_read) from [<c0231cac>] (__vfs_read) [<c0231c5c>] (__vfs_read) from [<c0231ee0>] (vfs_read) [<c0231e34>] (vfs_read) from [<c0232464>] (ksys_read) [<c02323f0>] (ksys_read) from [<c02324fc>] (sys_read) [<c02324e4>] (sys_read) from [<c00091d0>] (__sys_trace_return) (CVE-2022-49308)

  - 已解決 Linux 核心中的下列弱點：tick/nohz: unexport __init-annotated tick_nohz_full_setup() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade.
    Commit 28438794aba4 (modpost: fix section mismatch check for exported init/exit sections) fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost:
    vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable
    __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c. (CVE-2022-49675)

  - 已解決 Linux 核心中的下列弱點：ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo() In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. (CVE-2022-49731)

  - 已解決 Linux 核心中的下列弱點：bridge: switchdev: Fix memory leaks when changing VLAN protocol The bridge driver can offload VLANs to the underlying hardware either via switchdev or the 8021q driver. When the former is used, the VLAN is marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV' private flag. To avoid the memory leaks mentioned in the cited commit, the bridge driver will try to delete a VLAN via the 8021q driver if the VLAN is not marked with the previously mentioned flag. When the VLAN protocol of the bridge changes, switchdev drivers are notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but the 8021q driver is also called to add the existing VLANs with the new protocol and delete them with the old protocol. In case the VLANs were offloaded via switchdev, the above behavior is both redundant and buggy. Redundant because the VLANs are already programmed in hardware and drivers that support VLAN protocol change (currently only mlx5) change the protocol upon the switchdev attribute notification. Buggy because the 8021q driver is called despite these VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to memory leaks [1] when the VLANs are deleted. Fix by not calling the 8021q driver for VLANs that were already programmed via switchdev. [1] unreferenced object 0xffff8881f6771200 (size 256): comm ip, pid 446855, jiffies 4298238841 (age 55.240s) hex dump (first 32 bytes): 00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace:
    [<00000000012819ac>] vlan_vid_add+0x437/0x750 [<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920 [<000000000632b56f>] br_changelink+0x3d6/0x13f0 [<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0 [<00000000f6276baf>] rtnl_newlink+0x5f/0x90 [<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00 [<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340 [<0000000010588814>] netlink_unicast+0x438/0x710 [<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40 [<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0 [<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0 [<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0 [<00000000684f7e25>] __sys_sendmsg+0xab/0x130 [<000000004538b104>] do_syscall_64+0x3d/0x90 [<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 (CVE-2022-49812)

  - 已解決 Linux 核心中的下列弱點：capabilities: fix potential memleak on error path from vfs_getxattr_alloc() In cap_inode_getsecurity(), we will use vfs_getxattr_alloc() to complete the memory allocation of tmpbuf, if we have completed the memory allocation of tmpbuf, but failed to call handler->get(...), there will be a memleak in below logic: |-- ret = (int)vfs_getxattr_alloc(mnt_userns, ...) | /* ^^^ alloc for tmpbuf */ |-- value = krealloc(*xattr_value, error + 1, flags) | /* ^^^ alloc memory */ |-- error = handler->get(handler, ...) | /* error! */ |--
    *xattr_value = value | /* xattr_value is &tmpbuf (memory leak!) */ So we will try to free(tmpbuf) after vfs_getxattr_alloc() fails to fix it. [PM: subject line and backtrace tweaks] (CVE-2022-49890)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

ID	名稱	產品	系列	已發布	已更新	嚴重性
279785	Linux Distros 未修補弱點：CVE-2022-50704	Nessus	Misc.	2025/12/24	2026/9/30	medium
360687	AlmaLinux 9.2 [TuxCare] 安全性更新：bpftool / kernel / kernel-abi-stablelists / kernel-core / etc 多個弱點（ALMALINUX9.2：CLSA-2026：1783362244）	Nessus	Alma Linux Local Security Checks	2026/10/1	2026/10/1	high

偵測

搜尋 Plugin

medium

high