Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且廠商未提供可用的修補程式。

  - kprobes修正 kill_kprobe() 中啟用之探查的檢查。在 kill_kprobe() 檢查是否需要呼叫 disarm_kprobe_ftrace() 時一律會失敗。這是因為在此之前我們為 kprobe 設定了 KPROBE_FLAG_GONE 旗標使得 !kprobe_disabled(p) 永遠為 false。commit: 0cb2f1372baa (kprobes修正 kprobe_ftrace_handler 的 NULL 指標解除參照)引入的 disarm_kprobe_ftrace() 呼叫可修正 NULL 指標參照問題。啟用探查時若我們未將其解除佈建此問題仍然存在。透過在設定 KPROBE_FLAG_GONE 旗標前放置已啟用探查檢查來修正此問題。
    (CVE-2022-50266)

請注意，Nessus 依賴供應商報告的套件存在。

AlmaLinux 9.2 主機已安裝的套件會受到 TuxCare ALMALINUX9.2：CLSA-2026：1780516677 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：can: isotp: fix potential CAN frame reception race in isotp_rcv() When receiving a CAN frame the current code logic does not consider concurrently receiving processes which do not show up in real world usage. Ziyang Xuan writes: The following syz problem is one of the scenarios. so->rx.len is changed by isotp_rcv_ff() during isotp_rcv_cf(), so->rx.len equals 0 before alloc_skb() and equals 4096 after alloc_skb(). That will trigger skb_over_panic() in skb_put(). ======================================================= CPU: 1 PID:
    19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc8-syzkaller #0 RIP: 0010:skb_panic+0x16c/0x16e net/core/skbuff.c:113 Call Trace: <TASK> skb_over_panic net/core/skbuff.c:118 [inline] skb_put.cold+0x24/0x24 net/core/skbuff.c:1990 isotp_rcv_cf net/can/isotp.c:570 [inline] isotp_rcv+0xa38/0x1e30 net/can/isotp.c:668 deliver net/can/af_can.c:574 [inline] can_rcv_filter+0x445/0x8d0 net/can/af_can.c:635 can_receive+0x31d/0x580 net/can/af_can.c:665 can_rcv+0x120/0x1c0 net/can/af_can.c:696 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5465
    __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5579 Therefore we make sure the state changes and data structures stay consistent at CAN frame reception time by adding a spin_lock in isotp_rcv(). This fixes the issue reported by syzkaller but does not affect real world operation. (CVE-2022-48830)

  - 已解決 Linux 核心中的下列弱點：wifi: mac80211: sdata can be NULL during AMPDU start ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a deauthentication is ongoing. Here a trace triggering the race with the hostapd test multi_ap_fronthaul_on_ap: (gdb) list
    *drv_ampdu_action+0x46 0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396). 391 int ret =
    -EOPNOTSUPP; 392 393 might_sleep(); 394 395 sdata = get_bss_sdata(sdata); 396 if (!check_sdata_in_driver(sdata)) 397 return -EIO; 398 399 trace_drv_ampdu_action(local, sdata, params); 400 wlan0: moving STA 02:00:00:00:03:00 to state 3 wlan0: associated wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING) wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0 wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port) wlan0: moving STA 02:00:00:00:03:00 to state 2 wlan0: moving STA 02:00:00:00:03:00 to state 1 wlan0: Removed STA 02:00:00:00:03:00 wlan0: Destroyed STA 02:00:00:00:03:00 BUG: unable to handle page fault for address:
    fffffffffffffb48 PGD 11814067 P4D 11814067 PUD 11816067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID:
    133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Workqueue: phy3 ieee80211_ba_session_work [mac80211] RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211] Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85 RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287 RAX:
    0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240 RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40 RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001 R10:
    0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0 R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8 FS: 0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0 Call Trace: <TASK> ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211] ieee80211_ba_session_work+0xff/0x2e0 [mac80211] process_one_work+0x29f/0x620 worker_thread+0x4d/0x3d0 ? process_one_work+0x620/0x620 kthread+0xfb/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> (CVE-2022-48875)

  - 已解決 Linux 核心中的下列弱點：udf: Fix preallocation discarding at indirect extent boundary When preallocation extent is the first one in the extent block, the code would corrupt extent tree header instead. Fix the problem and use udf_delete_aext() for deleting extent to avoid some code duplication. (CVE-2022-48946)

  - 已解決 Linux 核心中的下列弱點：Bluetooth: Fix crash when replugging CSR fake controllers It seems fake CSR 5.0 clones can cause the suspend notifier to be registered twice causing the following kernel panic: [ 71.986122] Call Trace: [ 71.986124] <TASK> [ 71.986125] blocking_notifier_chain_register+0x33/0x60 [ 71.986130] hci_register_dev+0x316/0x3d0 [bluetooth 99b5497ea3d09708fa1366c1dc03288bf3cca8da] [ 71.986154] btusb_probe+0x979/0xd85 [btusb e1e0605a4f4c01984a4b9c8ac58c3666ae287477] [ 71.986159] ? __pm_runtime_set_status+0x1a9/0x300 [ 71.986162] ? ktime_get_mono_fast_ns+0x3e/0x90 [ 71.986167] usb_probe_interface+0xe3/0x2b0 [ 71.986171] really_probe+0xdb/0x380 [ 71.986174] ? pm_runtime_barrier+0x54/0x90 [ 71.986177]
    __driver_probe_device+0x78/0x170 [ 71.986180] driver_probe_device+0x1f/0x90 [ 71.986183]
    __device_attach_driver+0x89/0x110 [ 71.986186] ? driver_allows_async_probing+0x70/0x70 [ 71.986189] bus_for_each_drv+0x8c/0xe0 [ 71.986192] __device_attach+0xb2/0x1e0 [ 71.986195] bus_probe_device+0x92/0xb0 [ 71.986198] device_add+0x422/0x9a0 [ 71.986201] ? sysfs_merge_group+0xd4/0x110 [ 71.986205] usb_set_configuration+0x57a/0x820 [ 71.986208] usb_generic_driver_probe+0x4f/0x70 [ 71.986211] usb_probe_device+0x3a/0x110 [ 71.986213] really_probe+0xdb/0x380 [ 71.986216] ? pm_runtime_barrier+0x54/0x90 [ 71.986219] __driver_probe_device+0x78/0x170 [ 71.986221] driver_probe_device+0x1f/0x90 [ 71.986224] __device_attach_driver+0x89/0x110 [ 71.986227] ? driver_allows_async_probing+0x70/0x70 [ 71.986230] bus_for_each_drv+0x8c/0xe0 [ 71.986232]
    __device_attach+0xb2/0x1e0 [ 71.986235] bus_probe_device+0x92/0xb0 [ 71.986237] device_add+0x422/0x9a0 [71.986239] ? _dev_info+0x7d/0x98 [ 71.986242] ? blake2s_update+0x4c/0xc0 [ 71.986246] usb_new_device.cold+0x148/0x36d [ 71.986250] hub_event+0xa8a/0x1910 [ 71.986255] process_one_work+0x1c4/0x380 [ 71.986259] worker_thread+0x51/0x390 [ 71.986262] ? rescuer_thread+0x3b0/0x3b0 [ 71.986264] kthread+0xdb/0x110 [ 71.986266] ? kthread_complete_and_exit+0x20/0x20 [ 71.986268] ret_from_fork+0x1f/0x30 [ 71.986273] </TASK> [ 71.986274]
    ---[ end trace 0000000000000000 ]--- [ 71.986284] btusb: probe of 2-1.6:1.0 failed with error -17 (CVE-2022-48982)

  - 已解決 Linux 核心中的下列弱點：can: m_can: pci: add missing m_can_class_free_dev() in probe/remove methods In m_can_pci_remove() and error handling path of m_can_pci_probe(), m_can_class_free_dev() should be called to free resource allocated by m_can_class_allocate_dev(), otherwise there will be memleak. (CVE-2022-49024)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

AlmaLinux 9.6 主機已安裝的套件會受到 TuxCare ALMALINUX9.6：CLSA-2026：1779434490 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：configfs: fix a race in configfs_{,un}register_subsystem() When configfs_register_subsystem() or configfs_unregister_subsystem() is executing link_group() or unlink_group(), it is possible that two processes add or delete list concurrently. Some unfortunate interleavings of them can cause kernel panic. One of cases is: A --> B --> C --> D A <-- B <-- C <-- D delete list_head *B | delete list_head *C
    --------------------------------|----------------------------------- configfs_unregister_subsystem | configfs_unregister_subsystem unlink_group | unlink_group unlink_obj | unlink_obj list_del_init | list_del_init __list_del_entry | __list_del_entry __list_del | __list_del // next == C | next->prev = prev | | next->prev = prev prev->next = next | | // prev == B | prev->next = next Fix this by adding mutex when calling link_group() or unlink_group(), but parent configfs_subsystem is NULL when config_item is root. So I create a mutex configfs_subsystem_mutex. (CVE-2022-48931)

  - 已解決 Linux 核心中的下列弱點：list: fix a data-race around ep->rdllist ep_poll() first calls ep_events_available() with no lock held and checks if ep->rdllist is empty by list_empty_careful(), which reads rdllist->prev. Thus all accesses to it need some protection to avoid store/load-tearing. Note INIT_LIST_HEAD_RCU() already has the annotation for both prev and next.
    Commit bf3b9f6372c4 (epoll: Add busy poll support to epoll with socket fds.) added the first lockless ep_events_available(), and commit c5a282e9635e (fs/epoll: reduce the scope of wq lock in epoll_wait()) made some ep_events_available() calls lockless and added single call under a lock, finally commit e59d3c64cba6 (epoll: eliminate unnecessary lock for zero timeout) made the last ep_events_available() lockless. BUG: KCSAN: data-race in do_epoll_wait / do_epoll_wait write to 0xffff88810480c7d8 of 8 bytes by task 1802 on cpu 0: INIT_LIST_HEAD include/linux/list.h:38 [inline] list_splice_init include/linux/list.h:492 [inline] ep_start_scan fs/eventpoll.c:622 [inline] ep_send_events fs/eventpoll.c:1656 [inline] ep_poll fs/eventpoll.c:1806 [inline] do_epoll_wait+0x4eb/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810480c7d8 of 8 bytes by task 1799 on cpu 1: list_empty_careful include/linux/list.h:329 [inline] ep_events_available fs/eventpoll.c:381 [inline] ep_poll fs/eventpoll.c:1797 [inline] do_epoll_wait+0x279/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff88810480c7d0 -> 0xffff888103c15098 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1799 Comm: syz-fuzzer Tainted:
    G W 5.17.0-rc7-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 (CVE-2022-49443)

  - 已解決 Linux 核心中的下列弱點：ima: Fix potential memory leak in ima_init_crypto() On failure to allocate the SHA1 tfm, IMA fails to initialize and exits without freeing the ima_algo_array. Add the missing kfree() for ima_algo_array to avoid the potential memory leak.
    (CVE-2022-49627)

  - 已解決 Linux 核心中的下列弱點：tracing/histograms: Fix memory leak problem This reverts commit 46bbe5c671e06f070428b9be142cc4ee5cedebac. As commit 46bbe5c671e0 (tracing:
    fix double free) said, the double free problem reported by clang static analyzer is: > In parse_var_defs() if there is a problem allocating > var_defs.expr, the earlier var_defs.name is freed. > This free is duplicated by free_var_defs() which frees > the rest of the list. However, if there is a problem allocating N-th var_defs.expr: + in parse_var_defs(), the freed 'earlier var_defs.name' is actually the N-th var_defs.name; + then in free_var_defs(), the names from 0th to (N-1)-th are freed; IF ALLOCATING PROBLEM HAPPENED HERE!!! -+ \ | 0th 1th (N-1)-th N-th V +-------------+-------------+-----+-------------+----------- var_defs: | name | expr | name | expr | ... | name | expr | name | /// +-------------+-------------+-----+-------------+----------- These two frees don't act on same name, so there was no double free problem before. Conversely, after that commit, we get a memory leak problem because the above N-th var_defs.name is not freed. If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th var_defs.expr allocated, then execute on shell like: $ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger Then kmemleak reports: unreferenced object 0xffff8fb100ef3518 (size 8): comm bash, pid 196, jiffies 4295681690 (age 28.538s) hex dump (first 8 bytes): 76 31 00 00 b1 8f ff ff v1...... backtrace: [<0000000038fe4895>] kstrdup+0x2d/0x60 [<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0 [<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110 [<0000000066737a4c>] event_trigger_write+0x75/0xd0 [<000000007341e40c>] vfs_write+0xbb/0x2a0 [<0000000087fde4c2>] ksys_write+0x59/0xd0 [<00000000581e9cdf>] do_syscall_64+0x3a/0x80 [<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 (CVE-2022-49648)

  - 已解決 Linux 核心中的下列弱點：linux/dim: Fix divide by 0 in RDMA DIM Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio == 0. CallTrace: Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020 task: ffff880194b78000 task.stack: ffffc90006714000 RIP:
    0010:backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: 0018:ffff880c10e83ec0 EFLAGS: 00010202 RAX:
    0000000000002710 RBX: ffff88096cd7f780 RCX: 0000000000000064 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10:
    0000000000000000 R11: 0000000000000000 R12: 000000001d7c6c09 R13: ffff88096cd7f780 R14: ffff880b174fe800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880c10e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000a0965b00 CR3: 000000000200a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6:
    00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ib_poll_handler+0x43/0x80 [ib_core] irq_poll_softirq+0xae/0x110 __do_softirq+0xd1/0x28c irq_exit+0xde/0xf0 do_IRQ+0x54/0xe0 common_interrupt+0x8f/0x8f </IRQ> ? cpuidle_enter_state+0xd9/0x2a0 ? cpuidle_enter_state+0xc7/0x2a0 ? do_idle+0x170/0x1d0 ? cpu_startup_entry+0x6f/0x80 ? start_secondary+0x1b9/0x210 ? secondary_startup_64+0xa5/0xb0 Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: ffff880c10e83ec0 (CVE-2022-49670)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

Rocky Linux 9.6 主機已安裝的套件會受到 TuxCare ALMALINUX9.6：CLSA-2026：1779434490 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：configfs: fix a race in configfs_{,un}register_subsystem() When configfs_register_subsystem() or configfs_unregister_subsystem() is executing link_group() or unlink_group(), it is possible that two processes add or delete list concurrently. Some unfortunate interleavings of them can cause kernel panic. One of cases is: A --> B --> C --> D A <-- B <-- C <-- D delete list_head *B | delete list_head *C
    --------------------------------|----------------------------------- configfs_unregister_subsystem | configfs_unregister_subsystem unlink_group | unlink_group unlink_obj | unlink_obj list_del_init | list_del_init __list_del_entry | __list_del_entry __list_del | __list_del // next == C | next->prev = prev | | next->prev = prev prev->next = next | | // prev == B | prev->next = next Fix this by adding mutex when calling link_group() or unlink_group(), but parent configfs_subsystem is NULL when config_item is root. So I create a mutex configfs_subsystem_mutex. (CVE-2022-48931)

  - 已解決 Linux 核心中的下列弱點：list: fix a data-race around ep->rdllist ep_poll() first calls ep_events_available() with no lock held and checks if ep->rdllist is empty by list_empty_careful(), which reads rdllist->prev. Thus all accesses to it need some protection to avoid store/load-tearing. Note INIT_LIST_HEAD_RCU() already has the annotation for both prev and next.
    Commit bf3b9f6372c4 (epoll: Add busy poll support to epoll with socket fds.) added the first lockless ep_events_available(), and commit c5a282e9635e (fs/epoll: reduce the scope of wq lock in epoll_wait()) made some ep_events_available() calls lockless and added single call under a lock, finally commit e59d3c64cba6 (epoll: eliminate unnecessary lock for zero timeout) made the last ep_events_available() lockless. BUG: KCSAN: data-race in do_epoll_wait / do_epoll_wait write to 0xffff88810480c7d8 of 8 bytes by task 1802 on cpu 0: INIT_LIST_HEAD include/linux/list.h:38 [inline] list_splice_init include/linux/list.h:492 [inline] ep_start_scan fs/eventpoll.c:622 [inline] ep_send_events fs/eventpoll.c:1656 [inline] ep_poll fs/eventpoll.c:1806 [inline] do_epoll_wait+0x4eb/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810480c7d8 of 8 bytes by task 1799 on cpu 1: list_empty_careful include/linux/list.h:329 [inline] ep_events_available fs/eventpoll.c:381 [inline] ep_poll fs/eventpoll.c:1797 [inline] do_epoll_wait+0x279/0xf40 fs/eventpoll.c:2234 do_epoll_pwait fs/eventpoll.c:2268 [inline] __do_sys_epoll_pwait fs/eventpoll.c:2281 [inline] __se_sys_epoll_pwait+0x12b/0x240 fs/eventpoll.c:2275 __x64_sys_epoll_pwait+0x74/0x80 fs/eventpoll.c:2275 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff88810480c7d0 -> 0xffff888103c15098 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1799 Comm: syz-fuzzer Tainted:
    G W 5.17.0-rc7-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 (CVE-2022-49443)

  - 已解決 Linux 核心中的下列弱點：ima: Fix potential memory leak in ima_init_crypto() On failure to allocate the SHA1 tfm, IMA fails to initialize and exits without freeing the ima_algo_array. Add the missing kfree() for ima_algo_array to avoid the potential memory leak.
    (CVE-2022-49627)

  - 已解決 Linux 核心中的下列弱點：tracing/histograms: Fix memory leak problem This reverts commit 46bbe5c671e06f070428b9be142cc4ee5cedebac. As commit 46bbe5c671e0 (tracing:
    fix double free) said, the double free problem reported by clang static analyzer is: > In parse_var_defs() if there is a problem allocating > var_defs.expr, the earlier var_defs.name is freed. > This free is duplicated by free_var_defs() which frees > the rest of the list. However, if there is a problem allocating N-th var_defs.expr: + in parse_var_defs(), the freed 'earlier var_defs.name' is actually the N-th var_defs.name; + then in free_var_defs(), the names from 0th to (N-1)-th are freed; IF ALLOCATING PROBLEM HAPPENED HERE!!! -+ \ | 0th 1th (N-1)-th N-th V +-------------+-------------+-----+-------------+----------- var_defs: | name | expr | name | expr | ... | name | expr | name | /// +-------------+-------------+-----+-------------+----------- These two frees don't act on same name, so there was no double free problem before. Conversely, after that commit, we get a memory leak problem because the above N-th var_defs.name is not freed. If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th var_defs.expr allocated, then execute on shell like: $ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \ /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger Then kmemleak reports: unreferenced object 0xffff8fb100ef3518 (size 8): comm bash, pid 196, jiffies 4295681690 (age 28.538s) hex dump (first 8 bytes): 76 31 00 00 b1 8f ff ff v1...... backtrace: [<0000000038fe4895>] kstrdup+0x2d/0x60 [<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0 [<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110 [<0000000066737a4c>] event_trigger_write+0x75/0xd0 [<000000007341e40c>] vfs_write+0xbb/0x2a0 [<0000000087fde4c2>] ksys_write+0x59/0xd0 [<00000000581e9cdf>] do_syscall_64+0x3a/0x80 [<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 (CVE-2022-49648)

  - 已解決 Linux 核心中的下列弱點：linux/dim: Fix divide by 0 in RDMA DIM Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio == 0. CallTrace: Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020 task: ffff880194b78000 task.stack: ffffc90006714000 RIP:
    0010:backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: 0018:ffff880c10e83ec0 EFLAGS: 00010202 RAX:
    0000000000002710 RBX: ffff88096cd7f780 RCX: 0000000000000064 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10:
    0000000000000000 R11: 0000000000000000 R12: 000000001d7c6c09 R13: ffff88096cd7f780 R14: ffff880b174fe800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880c10e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000a0965b00 CR3: 000000000200a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6:
    00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ib_poll_handler+0x43/0x80 [ib_core] irq_poll_softirq+0xae/0x110 __do_softirq+0xd1/0x28c irq_exit+0xde/0xf0 do_IRQ+0x54/0xe0 common_interrupt+0x8f/0x8f </IRQ> ? cpuidle_enter_state+0xd9/0x2a0 ? cpuidle_enter_state+0xc7/0x2a0 ? do_idle+0x170/0x1d0 ? cpu_startup_entry+0x6f/0x80 ? start_secondary+0x1b9/0x210 ? secondary_startup_64+0xa5/0xb0 Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: ffff880c10e83ec0 (CVE-2022-49670)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

ID	名稱	產品	系列	已發布	已更新	嚴重性
264986	Linux Distros 未修補的弱點：CVE-2022-50266	Nessus	Misc.	2025/9/16	2026/9/30	medium
351689	AlmaLinux 9.2 [TuxCare] 安全性更新：bpftool / kernel / kernel-abi-stablelists / kernel-core / etc 多個弱點（ALMALINUX9.2：CLSA-2026：1780516677）	Nessus	Alma Linux Local Security Checks	2026/9/30	2026/9/30	high
360724	AlmaLinux 9.6 [TuxCare] 安全性更新：kernel / kernel-abi-stablelists / kernel-core / etc 多個弱點（ALMALINUX9.6：CLSA-2026：1779434490）	Nessus	Alma Linux Local Security Checks	2026/10/1	2026/10/2	high
360889	Rocky Linux 9.6 [TuxCare] 安全性更新：kernel / kernel-abi-stablelists / kernel-core / etc 多個弱點（ALMALINUX9.6：CLSA-2026：1779434490）	Nessus	Rocky Linux Local Security Checks	2026/10/1	2026/10/2	high

偵測

搜尋 Plugin

medium

high

high

high