According to the versions of the python-pillow package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for     an ICO container, and thus an attempted memory     allocation can be very large. (CVE-2021-27923)

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for     an ICNS container, and thus an attempted memory     allocation can be very large. (CVE-2021-27922)

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for a     BLP container, and thus an attempted memory allocation     can be very large. (CVE-2021-27921)

  - In Pillow before 8.1.0, SGIRleDecode has a 4-byte     buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are     mishandled.(CVE-2020-35655)

  - An issue was discovered in Pillow before 8.2.0. For EPS     data, the readline implementation used in EPSImageFile     has to deal with any combination of \r and \n as line     endings. It used an accidentally quadratic method of     accumulating lines while looking for a line ending. A     malicious EPS file could use this to perform a DoS of     Pillow in the open phase, before an image was accepted     for opening.(CVE-2021-28677)

  - An issue was discovered in Pillow before 8.2.0. For FLI     data, FliDecode did not properly check that the block     advance was non-zero, potentially leading to an     infinite loop on load.(CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. There     is an out-of-bounds read in J2kDecode, in     j2ku_graya_la.(CVE-2021-25287)

  - An issue was discovered in Pillow before 8.2.0. For BLP     data, BlpImagePlugin did not properly check that reads     (after jumping to file offsets) returned data. This     could lead to a DoS where the decoder could be run a     large number of times on empty data.(CVE-2021-28678)

  - An issue was discovered in Pillow before 8.2.0. There     is an out-of-bounds read in J2kDecode, in     j2ku_gray_i.(CVE-2021-25288)

  - An issue was discovered in Pillow before 8.2.0.
    PSDImagePlugin.PsdImageFile lacked a sanity check on     the number of input layers relative to the size of the     data block. This could lead to a DoS on Image.open     prior to Image.load.(CVE-2021-28675)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for a     BLP container, and thus an attempted memory allocation     can be very large.(CVE-2021-27921)

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for     an ICNS container, and thus an attempted memory     allocation can be very large.(CVE-2021-27922)

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for     an ICO container, and thus an attempted memory     allocation can be very large.(CVE-2021-27923)

  - In Pillow before 8.1.0, SGIRleDecode has a 4-byte     buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are     mishandled.(CVE-2020-35655)

  - An issue was discovered in Pillow before 8.2.0.
    PSDImagePlugin.PsdImageFile lacked a sanity check on     the number of input layers relative to the size of the     data block. This could lead to a DoS on Image.open     prior to Image.load.(CVE-2021-28675)

  - An issue was discovered in Pillow before 8.2.0. For FLI     data, FliDecode did not properly check that the block     advance was non-zero, potentially leading to an     infinite loop on load.(CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS     data, the readline implementation used in EPSImageFile     has to deal with any combination of \r and \n as line     endings. It used an accidentally quadratic method of     accumulating lines while looking for a line ending. A     malicious EPS file could use this to perform a DoS of     Pillow in the open phase, before an image was accepted     for opening.(CVE-2021-28677)

  - An issue was discovered in Pillow before 8.2.0. For BLP     data, BlpImagePlugin did not properly check that reads     (after jumping to file offsets) returned data. This     could lead to a DoS where the decoder could be run a     large number of times on empty data.(CVE-2021-28678)

  - An issue was discovered in Pillow before 8.2.0. There     is an out-of-bounds read in J2kDecode, in     j2ku_graya_la.(CVE-2021-25287)

  - An issue was discovered in Pillow before 8.2.0. There     is an out-of-bounds read in J2kDecode, in     j2ku_gray_i.(CVE-2021-25288)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Redhat Enterprise Linux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the RHSA-2021:4149 advisory.

    The python-pillow packages contain a Python image processing library that provides extensive file format     support, an efficient internal representation, and powerful image-processing capabilities.

    Security Fix(es):

    * python-pillow: Out-of-bounds read in J2K image reader (CVE-2021-25287)

    * python-pillow: Out-of-bounds read in J2K image reader (CVE-2021-25288)

    * python-pillow: Negative-offset memcpy in TIFF image reader (CVE-2021-25290)

    * python-pillow: Regular expression DoS in PDF format parser (CVE-2021-25292)

    * python-pillow: Out-of-bounds read in SGI RLE image reader (CVE-2021-25293)

    * python-pillow: Excessive memory allocation in BLP image reader (CVE-2021-27921)

    * python-pillow: Excessive memory allocation in ICNS image reader (CVE-2021-27922)

    * python-pillow: Excessive memory allocation in ICO image reader (CVE-2021-27923)

    * python-pillow: Excessive memory allocation in PSD image reader (CVE-2021-28675)

    * python-pillow: Infinite loop in FLI image reader (CVE-2021-28676)

    * python-pillow: Excessive CPU use in EPS image reader (CVE-2021-28677)

    * python-pillow: Excessive looping in BLP image reader (CVE-2021-28678)

    * python-pillow: Buffer overflow in image convert function (CVE-2021-34552)

    * python-pillow: Buffer over-read in PCX image reader (CVE-2020-35653)

    * python-pillow: Buffer over-read in SGI RLE image reader (CVE-2020-35655)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

    Additional Changes:

    For detailed information on changes in this release, see the Red Hat Enterprise Linux 8.5 Release Notes     linked from the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote AlmaLinux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the ALSA-2021:4149 advisory.

  - In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

  - In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are mishandled. (CVE-2020-35655)

  - An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in     j2ku_graya_la. (CVE-2021-25287)

  - An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in     j2ku_gray_i. (CVE-2021-25288)

  - An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an     invalid size. (CVE-2021-25290)

  - An issue was discovered in Pillow before 8.1.1. The PDF parser allows a regular expression DoS (ReDoS)     attack via a crafted PDF file because of a catastrophic backtracking regex. (CVE-2021-25292)

  - An issue was discovered in Pillow before 8.1.1. There is an out-of-bounds read in SGIRleDecode.c.
    (CVE-2021-25293)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for a BLP container, and thus an attempted     memory allocation can be very large. (CVE-2021-27921)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICNS container, and thus an attempted     memory allocation can be very large. (CVE-2021-27922)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICO container, and thus an attempted     memory allocation can be very large. (CVE-2021-27923)

  - An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the     number of input layers relative to the size of the data block. This could lead to a DoS on Image.open     prior to Image.load. (CVE-2021-28675)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

  - An issue was discovered in Pillow before 8.2.0. For BLP data, BlpImagePlugin did not properly check that     reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be     run a large number of times on empty data. (CVE-2021-28678)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The version of Tencent Linux installed on the remote TencentOS Server 3 host is prior to tested version. It is, therefore, affected by multiple vulnerabilities as referenced in the TSSA-2022:0012 advisory.

    Package updates are available for TencentOS Server 3 that fix the following vulnerabilities:

    CVE-2019-16865:
    An issue was discovered in Pillow before 6.2.0. When reading specially crafted invalid image files, the     library can either allocate very large amounts of memory or take an extremely long period of time to     process the image.

    CVE-2020-11538:
    In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing     of SGI image files, a different issue than CVE-2020-5311.

    CVE-2020-35655:
    In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are mishandled.

    CVE-2020-5311:
    libImaging/SgiRleDecode.c in Pillow before 6.2.2 has an SGI buffer overflow.

    CVE-2020-5313:
    libImaging/FliDecode.c in Pillow before 6.2.2 has an FLI buffer overflow.

    CVE-2021-27921:
    Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for a BLP container, and thus an attempted     memory allocation can be very large.

    CVE-2021-27923:
    Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICO container, and thus an attempted     memory allocation can be very large.

    CVE-2021-28676:
    An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load.

    CVE-2021-28678:
    An issue was discovered in Pillow before 8.2.0. For BLP data, BlpImagePlugin did not properly check that     reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be     run a large number of times on empty data.

    CVE-2021-34552:
    Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.

    CVE-2022-22816:
    path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of     ImagePath.Path.

    CVE-2022-22817:
    PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that     use the Python exec method.

Tenable has extracted the preceding description block directly from the Tencent Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote MiracleLinux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the AXSA:2021-2760:01 advisory.

    * python-pillow: Out-of-bounds read in J2K image reader (CVE-2021-25287)
      * python-pillow: Out-of-bounds read in J2K image reader (CVE-2021-25288)
      * python-pillow: Negative-offset memcpy in TIFF image reader (CVE-2021-25290)
      * python-pillow: Regular expression DoS in PDF format parser (CVE-2021-25292)
      * python-pillow: Out-of-bounds read in SGI RLE image reader (CVE-2021-25293)
      * python-pillow: Excessive memory allocation in BLP image reader (CVE-2021-27921)
      * python-pillow: Excessive memory allocation in ICNS image reader (CVE-2021-27922)
      * python-pillow: Excessive memory allocation in ICO image reader (CVE-2021-27923)
      * python-pillow: Excessive memory allocation in PSD image reader (CVE-2021-28675)
      * python-pillow: Infinite loop in FLI image reader (CVE-2021-28676)
      * python-pillow: Excessive CPU use in EPS image reader (CVE-2021-28677)
      * python-pillow: Excessive looping in BLP image reader (CVE-2021-28678)
      * python-pillow: Buffer overflow in image convert function (CVE-2021-34552)
      * python-pillow: Buffer over-read in PCX image reader (CVE-2020-35653)
      * python-pillow: Buffer over-read in SGI RLE image reader (CVE-2020-35655)

Tenable has extracted the preceding description block directly from the MiracleLinux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote host is affected by the vulnerability described in GLSA-202101-08 (Pillow: Multiple vulnerabilities)

    Multiple vulnerabilities have been discovered in Pillow. Please review       the CVE identifiers referenced below for details.
  Impact :

    Please review the referenced CVE identifiers for details.
  Workaround :

    There is no known workaround at this time.

The remote Fedora 33 host has packages installed that are affected by multiple vulnerabilities as referenced in the FEDORA-2021-a8ddc1ce70 advisory.

  - In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

  - In Pillow before 8.1.0, TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files     because of certain interpretation conflicts with LibTIFF in RGBA mode. (CVE-2020-35654)

  - In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are mishandled. (CVE-2020-35655)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

ID	名稱	產品	系列	已發布	已更新	嚴重性
151547	EulerOS Virtualization 2.9.1 : python-pillow (EulerOS-SA-2021-2187)	Nessus	Huawei Local Security Checks	2021/7/13	2023/12/8	critical
152285	EulerOS 2.0 SP9 : python-pillow (EulerOS-SA-2021-2279)	Nessus	Huawei Local Security Checks	2021/8/9	2023/12/6	critical
155178	RHEL 8 : python-pillow (RHSA-2021:4149)	Nessus	Red Hat Local Security Checks	2021/11/11	2024/11/7	critical
157623	AlmaLinux 8 : python-pillow (ALSA-2021:4149)	Nessus	Alma Linux Local Security Checks	2022/2/9	2022/2/14	critical
238675	TencentOS Server 3: python-pillow (TSSA-2022:0012)	Nessus	Tencent Local Security Checks	2025/6/16	2025/11/20	critical
294468	MiracleLinux 8 : python-pillow-5.1.1-16.el8 (AXSA:2021-2760:01)	Nessus	Miracle Linux Local Security Checks	2026/1/20	2026/1/20	critical
144867	GLSA-202101-08 : Pillow: Multiple vulnerabilities	Nessus	Gentoo Local Security Checks	2021/1/12	2024/1/30	high
145235	Fedora 33 : mingw-python-pillow / python-pillow (2021-a8ddc1ce70)	Nessus	Fedora Local Security Checks	2021/1/21	2021/4/12	high

偵測

搜尋 Plugin

critical

critical

critical

critical

critical

critical

high

high