The remote Rocky Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the RLSA-2021:3061 advisory.

  - hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address     in an msi-x mmio operation. (CVE-2020-13754)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a valid Layer 3 protocol. (CVE-2020-27617)

  - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions     up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get     bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the     host resulting in DoS scenario. (CVE-2021-3416)

  - A flaw was found in the hivex library in versions before 1.3.20. It is caused due to a lack of bounds     check within the hivex_open function. An attacker could input a specially crafted Windows Registry (hive)     file which would cause hivex to read memory beyond its normal bounds or cause the program to crash. The     highest threat from this vulnerability is to system availability. (CVE-2021-3504)

  - An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of     QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an     interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said     issue while updating controller state fields and their subsequent processing. A privileged guest user may     use this flaw to crash the QEMU process on the host resulting in DoS scenario. (CVE-2021-20221)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

Multiple security issues were discovered in QEMU, a fast processor emulator, which could result in denial of service.

The remote CentOS Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the CESA-2021:3061 advisory.

  - QEMU: msix: OOB access during mmio operations may lead to DoS (CVE-2020-13754)

  - QEMU: net: an assert failure via eth_get_gso_type (CVE-2020-27617)

  - qemu: out-of-bound heap buffer access via an interrupt ID field (CVE-2021-20221)

  - QEMU: net: Infinite loop in loopback mode may lead to stack overflow (CVE-2021-3416)

  - hivex: Buffer overflow when provided invalid node key length (CVE-2021-3504)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to the versions of the qemu package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - QEMU is a generic and open source processor emulator     which achieves a good emulation speed by using dynamic     translation. QEMU has two operating modes: * Full     system emulation. In this mode, QEMU emulates a full     system (for example a PC), including a processor and     various peripherials. It can be used to launch     different Operating Systems without rebooting the PC or     to debug system code. * User mode emulation. In this     mode, QEMU can launch Linux processes compiled for one     CPU on another CPU. As QEMU requires no host kernel     patches to run, it is safe and easy to use.Security     Fix(es):In QEMU through 5.0.0, an assertion failure can     occur in the network packet processing. This issue     affects the e1000e and vmxnet3 network devices. A     malicious guest user/process could use this flaw to     abort the QEMU process on the host, resulting in a     denial of service condition in     net_tx_pkt_add_raw_fragment in hw/ net/     net_tx_pkt.c.(CVE-2020-16092)hw/pci/msix.c in QEMU     4.2.0 allows guest OS users to trigger an out-of-bounds     access via a crafted address in an msi-x mmio     operation.(CVE-2020-13754)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the qemu-kvm packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - An out-of-bounds access flaw was found in the Message     Signalled Interrupt (MSI-X) device support of QEMU.
    This issue occurs while performing MSI-X mmio     operations when a guest sent address goes beyond the     mmio region. A guest user or process may use this flaw     to crash the QEMU process resulting in a denial of     service.(CVE-2020-13754)

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL     pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call.(CVE-2020-25743)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before     5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid     pointer.(CVE-2020-25742)

  - QEMU 5.0.0 has a heap-based Buffer Overflow in     flatview_read_continue in exec.c because hw/sd/sdhci.c     mishandles a write operation in the SDHC_BLKSIZE     case.(CVE-2020-25085)

  - The patch for CVE-2020-17380 and CVE-2020-25085, both     involving a heap buffer overflow in the SDHCI     controller emulation code of QEMU, was found to be     incomplete. A malicious privileged guest could     reproduce the same issues with specially crafted input,     inducing a bogus transfer and subsequent out-of-bounds     read/write access in sdhci_do_adma() or     sdhci_sdma_transfer_multi_blocks(). CVE-2021-3409 was     assigned to facilitate the tracking and backporting of     the new patch.(CVE-2021-3409)

  - A use-after-free flaw was found in the MegaRAID     emulator of QEMU. This issue occurs while processing     SCSI I/O requests in the case of an error     mptsas_free_request() that does not dequeue the request     object 'req' from a pending requests queue. This flaw     allows a privileged guest user to crash the QEMU     process on the host, resulting in a denial of     service.(CVE-2021-3392)

  - A potential stack overflow via infinite loop issue was     found in various NIC emulators of QEMU. The issue     occurs in loopback mode of a NIC wherein reentrant DMA     checks get bypassed. A guest user/process may use this     flaw to consume CPU cycles or crash the QEMU process on     the host resulting in DoS scenario.(CVE-2021-3416)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote SUSE Linux SLES15 / SLES_SAP15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2021:1895-1 advisory.

  - libslirp 4.0.0, as used in QEMU 4.1.0, has a use-after-free in ip_reass in ip_input.c. (CVE-2019-15890)

  - An out-of-bounds read vulnerability was found in the SLiRP networking implementation of the QEMU emulator.
    This flaw occurs in the icmp6_send_echoreply() routine while replying to an ICMP echo request, also known     as ping. This flaw allows a malicious guest to leak the contents of the host memory, resulting in possible     information disclosure. This flaw affects versions of libslirp before 4.3.1. (CVE-2020-10756)

  - hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address     in an msi-x mmio operation. (CVE-2020-13754)

  - An out-of-bounds read/write access flaw was found in the USB emulator of the QEMU in versions before     5.2.0. This issue occurs while processing USB packets from a guest when USBDevice 'setup_len' exceeds its     'data_buf[4096]' in the do_token_in, do_token_out routines. This flaw allows a guest user to crash the     QEMU process, resulting in a denial of service, or the potential execution of arbitrary code with the     privileges of the QEMU process on the host. (CVE-2020-14364)

  - A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while     processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user     within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host,     resulting in a denial of service. (CVE-2020-25723)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29129)

  - slirp.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29130)

  - In libslirp 4.1.0, as used in QEMU 4.2.0, tcp_subr.c misuses snprintf return values, leading to a buffer     overflow in later code. (CVE-2020-8608)

  - An infinite loop flaw was found in the e1000 NIC emulator of the QEMU. This issue occurs while processing     transmits (tx) descriptors in process_tx_desc if various descriptor fields are initialized with invalid     values. This flaw allows a guest to consume CPU cycles on the host, resulting in a denial of service. The     highest threat from this vulnerability is to system availability. (CVE-2021-20257)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLES12 / SLES_SAP12 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2021:1894-1 advisory.

  - libslirp 4.0.0, as used in QEMU 4.1.0, has a use-after-free in ip_reass in ip_input.c. (CVE-2019-15890)

  - An out-of-bounds read vulnerability was found in the SLiRP networking implementation of the QEMU emulator.
    This flaw occurs in the icmp6_send_echoreply() routine while replying to an ICMP echo request, also known     as ping. This flaw allows a malicious guest to leak the contents of the host memory, resulting in possible     information disclosure. This flaw affects versions of libslirp before 4.3.1. (CVE-2020-10756)

  - hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address     in an msi-x mmio operation. (CVE-2020-13754)

  - An out-of-bounds read/write access flaw was found in the USB emulator of the QEMU in versions before     5.2.0. This issue occurs while processing USB packets from a guest when USBDevice 'setup_len' exceeds its     'data_buf[4096]' in the do_token_in, do_token_out routines. This flaw allows a guest user to crash the     QEMU process, resulting in a denial of service, or the potential execution of arbitrary code with the     privileges of the QEMU process on the host. (CVE-2020-14364)

  - A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while     processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user     within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host,     resulting in a denial of service. (CVE-2020-25723)

  - slirp.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29130)

  - In libslirp 4.1.0, as used in QEMU 4.2.0, tcp_subr.c misuses snprintf return values, leading to a buffer     overflow in later code. (CVE-2020-8608)

  - An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of     QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an     interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said     issue while updating controller state fields and their subsequent processing. A privileged guest user may     use this flaw to crash the QEMU process on the host resulting in DoS scenario. (CVE-2021-20221)

  - An infinite loop flaw was found in the e1000 NIC emulator of the QEMU. This issue occurs while processing     transmits (tx) descriptors in process_tx_desc if various descriptor fields are initialized with invalid     values. This flaw allows a guest to consume CPU cycles on the host, resulting in a denial of service. The     highest threat from this vulnerability is to system availability. (CVE-2021-20257)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLES15 / SLES_SAP15 / openSUSE 15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2023:3721-1 advisory.

  - hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address     in an msi-x mmio operation. (CVE-2020-13754)

  - An out-of-bounds memory access flaw was found in the ATI VGA device emulation of QEMU. This flaw occurs in     the ati_2d_blt() routine while handling MMIO write operations when the guest provides invalid values for     the destination display parameters. A malicious guest could use this flaw to crash the QEMU process on the     host, resulting in a denial of service. (CVE-2021-3638)

  - A DMA reentrancy issue was found in the USB EHCI controller emulation of QEMU. EHCI does not verify if the     Buffer Pointer overlaps with its MMIO region when it transfers the USB packets. Crafted content may be     written to the controller's registers and trigger undesirable actions (such as reset) while the device is     still transferring packets. This can ultimately lead to a use-after-free issue. A malicious guest could     use this flaw to crash the QEMU process on the host, resulting in a denial of service condition, or     potentially execute arbitrary code within the context of the QEMU process on the host. This flaw affects     QEMU versions before 7.0.0. (CVE-2021-3750)

  - A DMA reentrancy issue was found in the NVM Express Controller (NVME) emulation in QEMU. This CVE is     similar to CVE-2021-3750 and, just like it, when the reentrancy write triggers the reset function     nvme_ctrl_reset(), data structs will be freed leading to a use-after-free issue. A malicious guest could     use this flaw to crash the QEMU process on the host, resulting in a denial of service condition or,     potentially, executing arbitrary code within the context of the QEMU process on the host. (CVE-2021-3929)

  - A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device. This flaw allows a     crafted guest driver to execute HW commands when shared buffers are not yet allocated, potentially leading     to a use-after-free condition. (CVE-2022-1050)

  - A flaw was found in the vhost-vsock device of QEMU. In case of error, an invalid element was not detached     from the virtqueue before freeing its memory, leading to memory leakage and other unexpected results.
    Affected QEMU versions <= 6.2.0. (CVE-2022-26354)

  - A vulnerability in the lsi53c895a device affects the latest version of qemu. A DMA-MMIO reentrancy problem     may lead to memory corruption bugs like stack overflow or use-after-free. (CVE-2023-0330)

  - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions     up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get     bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the     host resulting in DoS scenario. (CVE-2021-3416) (CVE-2023-2861)

  - A flaw was found in the QEMU virtual crypto device while handling data encryption/decryption requests in     virtio_crypto_handle_sym_req. There is no check for the value of `src_len` and `dst_len` in     virtio_crypto_sym_op_helper, potentially leading to a heap buffer overflow when the two values differ.
    (CVE-2023-3180)

  - A flaw was found in the QEMU built-in VNC server. When a client connects to the VNC server, QEMU checks     whether the current number of connections crosses a certain threshold and if so, cleans up the previous     connection. If the previous connection happens to be in the handshake phase and fails, QEMU cleans up the     connection again, resulting in a NULL pointer dereference issue. This could allow a remote unauthenticated     client to cause a denial of service. (CVE-2023-3354)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2021-9034 advisory.

  - An out-of-bounds read/write access flaw was found in the USB emulator of the QEMU in versions before     5.2.0. This issue occurs while processing USB packets from a guest when USBDevice 'setup_len' exceeds its     'data_buf[4096]' in the do_token_in, do_token_out routines. This flaw allows a guest user to crash the     QEMU process, resulting in a denial of service, or the potential execution of arbitrary code with the     privileges of the QEMU process on the host. (CVE-2020-14364)

  - In QEMU through 5.0.0, an assertion failure can occur in the network packet processing. This issue affects     the e1000e and vmxnet3 network devices. A malicious guest user/process could use this flaw to abort the     QEMU process on the host, resulting in a denial of service condition in net_tx_pkt_add_raw_fragment in     hw/net/net_tx_pkt.c. (CVE-2020-16092)

  - hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address     in an msi-x mmio operation. (CVE-2020-13754)

  - In QEMU 5.0.0 and earlier, megasas_lookup_frame in hw/scsi/megasas.c has an out-of-bounds read via a     crafted reply_queue_head field from a guest OS user. (CVE-2020-13362)

  - hw/net/tulip.c in QEMU 4.2.0 has a buffer overflow during the copying of tx/rx buffers because the frame     size is not validated against the r/w data length. (CVE-2020-11102)

  - hw/net/xgmac.c in the XGMAC Ethernet controller in QEMU before 07-20-2020 has a buffer overflow. This     occurs during packet transmission and affects the highbank and midway emulated machines. A guest user or     process could use this flaw to crash the QEMU process on the host, resulting in a denial of service or     potential privileged code execution. This was fixed in commit 5519724a13664b43e225ca05351c60b4468e4555.
    (CVE-2020-15863)

  - hw/pci/pci.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access by providing an     address near the end of the PCI configuration space. (CVE-2020-13791)

  - address_space_map in exec.c in QEMU 4.2.0 can trigger a NULL pointer dereference related to BounceBuffer.
    (CVE-2020-13659)

  - sd_wp_addr in hw/sd/sd.c in QEMU 4.2.0 uses an unvalidated address, which leads to an out-of-bounds read     during sdhci_write() operations. A guest OS user can crash the QEMU process. (CVE-2020-13253)

  - A flaw was found in QEMU in the implementation of the Pointer Authentication (PAuth) support for ARM     introduced in version 4.0 and fixed in version 5.0.0. A general failure of the signature generation     process caused every PAuth-enforced pointer to be signed with the same signature. A local attacker could     obtain the signature of a protected pointer and abuse this flaw to bypass PAuth protection for all     programs running on QEMU. (CVE-2020-10702)

  - hw/display/bochs-display.c in QEMU 4.0.0 does not ensure a sufficient PCI config space allocation, leading     to a buffer overflow involving the PCIe extended config space. (CVE-2019-15034)

  - In QEMU through 5.0.0, an integer overflow was found in the SM501 display driver implementation. This flaw     occurs in the COPY_AREA macro while handling MMIO write operations through the sm501_2d_engine_write()     callback. A local attacker could abuse this flaw to crash the QEMU process in sm501_2d_operation() in     hw/display/sm501.c on the host, resulting in a denial of service. (CVE-2020-12829)

  - oss_write in audio/ossaudio.c in QEMU before 5.0.0 mishandles a buffer position. (CVE-2020-14415)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop when a TD list has a loop. (CVE-2020-25625)

  - QEMU 5.0.0 has a use-after-free in hw/usb/hcd-xhci.c because the usb_packet_map return value is not     checked. (CVE-2020-25084)

  - ati_2d_blt in hw/display/ati_2d.c in QEMU 4.2.1 can encounter an outside-limits situation in a     calculation. A guest can crash the QEMU process. (CVE-2020-27616)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29129)

  - slirp.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29130)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host     controller driver. (CVE-2020-25624)

  - hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.
    (CVE-2020-28916)

  - An out-of-bounds read vulnerability was found in the SLiRP networking implementation of the QEMU emulator.
    This flaw occurs in the icmp6_send_echoreply() routine while replying to an ICMP echo request, also known     as ping. This flaw allows a malicious guest to leak the contents of the host memory, resulting in possible     information disclosure. This flaw affects versions of libslirp before 4.3.1. (CVE-2020-10756)

  - A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while     processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user     within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host,     resulting in a denial of service. (CVE-2020-25723)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

ID	名稱	產品	系列	已發布	已更新	嚴重性
157808	Rocky Linux 8 : virt:rhel and virt-devel:rhel (RLSA-2021:3061)	Nessus	Rocky Linux Local Security Checks	2022/2/9	2023/11/7	medium
138648	Debian DSA-4728-1 : qemu - security update	Nessus	Debian Local Security Checks	2020/7/20	2020/11/9	medium
152461	CentOS 8 : virt:rhel and virt-devel:rhel (CESA-2021:3061)	Nessus	CentOS Local Security Checks	2021/8/11	2023/2/8	medium
144161	EulerOS 2.0 SP8 : qemu (EulerOS-SA-2020-2531)	Nessus	Huawei Local Security Checks	2020/12/14	2024/2/2	medium
151231	EulerOS Virtualization 3.0.6.6 : qemu-kvm (EulerOS-SA-2021-2046)	Nessus	Huawei Local Security Checks	2021/7/1	2023/12/11	medium
150395	SUSE SLES15 Security Update : qemu (SUSE-SU-2021:1895-1)	Nessus	SuSE Local Security Checks	2021/6/9	2023/7/13	medium
150399	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1894-1)	Nessus	SuSE Local Security Checks	2021/6/9	2023/7/13	medium
181777	SUSE SLES15 / openSUSE 15 Security Update : qemu (SUSE-SU-2023:3721-1)	Nessus	SuSE Local Security Checks	2023/9/22	2024/3/15	high
146269	Oracle Linux 7 : qemu (ELSA-2021-9034)	Nessus	Oracle Linux Local Security Checks	2021/2/5	2024/1/23	medium

偵測

搜尋 Plugin

medium

medium

medium

medium

medium

medium

medium

high

medium