CentOS Linux 8.4 主機已安裝的套件會受到 TuxCare CENTOS8.4：CLSA-2026：1773048865 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：net/mlx5e: Avoid field-overflowing memcpy() In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing:
    #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes
    */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */} insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4
    */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. pahole shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. objdump -d shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). (CVE-2022-48744)

  - 已解決 Linux 核心中的下列弱點：NFSD: Fix the behavior of READ near OFFSET_MAX Dan Aloni reports: > Due to commit 8cfb9015280d (NFS: Always provide aligned buffers to > the RPC read layers) on the client, a read of 0xfff is aligned up > to server rsize of 0x1000. > > As a result, in a test where the server has a file of size > 0x7fffffffffffffff, and the client tries to read from the offset > 0x7ffffffffffff000, the read causes loff_t overflow in the server > and it returns an NFS code of EINVAL to the client. The client as > a result indefinitely retries the request. The Linux NFS client does not handle NFS?ERR_INVAL, even though all NFS specifications permit servers to return that status code for a READ. Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed and return a short result. Set the EOF flag in the result to prevent the client from retrying the READ request. This behavior appears to be consistent with Solaris NFS servers. Note that NFSv3 and NFSv4 use u64 offset values on the wire. These must be converted to loff_t internally before use -- an implicit type cast is not adequate for this purpose. Otherwise VFS checks against sb->s_maxbytes do not work properly.
    (CVE-2022-48827)

  - 已解決 Linux 核心中的下列弱點：Bluetooth: L2CAP: Fix user-after-free This uses l2cap_chan_hold_unless_zero() after calling __l2cap_get_chan_blah() to prevent the following trace: Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref *kref) Bluetooth: chan 0000000023c4974d Bluetooth: parent 00000000ae861c08 ================================================================== BUG: KASAN: use-after-free in
    __mutex_waiter_is_first kernel/locking/mutex.c:191 [inline] BUG: KASAN: use-after-free in
    __mutex_lock_common kernel/locking/mutex.c:671 [inline] BUG: KASAN: use-after-free in
    __mutex_lock+0x278/0x400 kernel/locking/mutex.c:729 Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389 (CVE-2022-50386)

  - 已解決 Linux 核心中的下列弱點：scsi: libsas: Fix use-after-free bug in smp_execute_task_sg() When executing SMP task failed, the smp_execute_task_sg() calls del_timer() to delete slow_task->timer. However, if the timer handler sas_task_internal_timedout() is running, the del_timer() in smp_execute_task_sg() will not stop it and a UAF will happen. The process is shown below:
    (thread 1) | (thread 2) smp_execute_task_sg() | sas_task_internal_timedout() ... | del_timer() | ... | ...
    sas_free_task(task) | kfree(task->slow_task) //FREE| | task->slow_task->... //USE Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure the timer handler have finished before the task->slow_task is deallocated. (CVE-2022-50422)

  - 已解決 Linux 核心中的下列弱點：kernfs: fix use-after-free in
    __kernfs_remove Syzkaller managed to trigger concurrent calls to kernfs_remove_by_name_ns() for the same file resulting in a KASAN detected use-after-free. The race occurs when the root node is freed during kernfs_drain(). To prevent this acquire an additional reference for the root of the tree that is removed before calling __kernfs_remove(). Found by syzkaller with the following reproducer (slab_nomerge is required): syz_mount_image$ext4(0x0, &(0x7f0000000100)='./file0\x00', 0x100000, 0x0, 0x0, 0x0, 0x0) r0 = openat(0xffffffffffffff9c, &(0x7f0000000080)='/proc/self/exe\x00', 0x0, 0x0) close(r0) pipe2(&(0x7f0000000140)={0xffffffffffffffff, <r1=>0xffffffffffffffff}, 0x800) mount$9p_fd(0x0, &(0x7f0000000040)='./file0\x00', &(0x7f00000000c0), 0x408, &(0x7f0000000280)={'trans=fd,', {'rfdno', 0x3d, r0}, 0x2c, {'wfdno', 0x3d, r1}, 0x2c, {[{@cache_loose}, {@mmap}, {@loose}, {@loose}, {@mmap}], [{@mask={'mask', 0x3d, '^MAY_EXEC'}}, {@fsmagic={'fsmagic', 0x3d, 0x10001}}, {@dont_hash}]}}) Sample report: ================================================================== BUG: KASAN: use-after-free in kernfs_type include/linux/kernfs.h:335 [inline] BUG: KASAN: use-after-free in kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] BUG: KASAN: use-after-free in __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 Read of size 2 at addr ffff8880088807f0 by task syz-executor.2/857 CPU: 0 PID: 857 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x6e/0x91 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x5e/0x5e5 mm/kasan/report.c:433 kasan_report+0xa3/0x130 mm/kasan/report.c:495 kernfs_type include/linux/kernfs.h:335 [inline] kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline]
    __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 __kernfs_remove fs/kernfs/dir.c:1356 [inline] kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943
    __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335 p9_client_create+0xd4d/0x1190 net/9p/client.c:993 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610 vfs_get_tree+0x85/0x2e0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x675/0x1d00 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x282/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f725f983aed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f725f0f7028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f725faa3f80 RCX: 00007f725f983aed RDX:
    00000000200000c0 RSI: 0000000020000040 RDI: 0000000000000000 RBP: 00007f725f9f419c R08: 0000000020000280 R09: 0000000000000000 R10: 0000000000000408 R11: 0000000000000246 R12: 0000000000000000 R13:
    0000000000000006 R14: 00007f725faa3f80 R15: 00007f725f0d7000 </TASK> Allocated by task 855:
    kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:470 kasan_slab_alloc include/linux/kasan.h:224 [inline] slab_post_alloc_hook mm/slab.h:7 ---truncated--- (CVE-2022-50432)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

Linux/Unix 主機上安裝了一個或多個受到弱點影響的套件，且供應商未提供可用的修補程式。

  - drm/amdgpu/gfx只有在啟用舊版 gfx ras 時停用 gfx9 cp_ecc_error_irq gfx9 cp_ecc_error_irq 只會在舊版 gfx ras 宣告時啟用。因此在 gfx_v9_0_hw_fini 中應在此情況下執行 cp_ecc_error_irq 的中斷停用否則將會發生 amdgpu_irq_put 呼叫追踪。 [ 7283.170322] RIP 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.170964] RSP
    0018:ffff9a5fc3967d00 EFLAGS00010246 [ 7283.170967] RAXffff98d88afd3040 RBXffff98d89da20000 RCX
    0000000000000000 [ 7283.170969] RDX 0000000000000000 RSIffff98d89da2bef8 RDIffff98d89da20000 [7283.170971] RBP ffff98d89da20000 R08ffff98d89da2ca18 R090 [0000000060 7283.170973000 R10[00000]
    ffffd5764243c008 R110000000000000000 R120000000000001050 [ 7283.170975] R13ffff98d89da38978 R14
     R15ffffffff999ae15a  : ffff98d880130105 [ 7283.170978] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000 [ 7283.170981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7283.170983] CR2:
    00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0 [ 7283.170986] Call Trace: [ 7283.170988] <TASK> [ 7283.170989] gfx_v9_0_hw_fini+0x1c/0x6d0 [amdgpu] [ 7283.171655] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu] [ 7283.172245] amdgpu_device_suspend+ 0x103/0x180 [amdgpu] [ 7283.172823] amdgpu_pmops_freeze+0x21/0x60 [amdgpu] [ 7283.173412] pci_pm_freeze+0x54/0xc0 [7283.173419] ? __pfx_pci_pm_freeze+0x10/0x10 [ 7283.173425] dpm_run_callback+0x98/0x200 [ 7283.173430]
    __device_suspend+0x164/0x5f0 v2中斷 gfx11因為它已在其他解決方案中透過淘汰 cp_ecc_irq funcs(Hawking) 完成 (CVE-2023-53471)

請注意，Nessus 的判定取決於廠商所報告的套件是否存在。

AlmaLinux 9.2 主機已安裝的套件會受到 TuxCare ALMALINUX9.2：CLSA-2026：1773139548 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：virtio_net: fix xdp_rxq_info bug after suspend/resume The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac
    __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up. (CVE-2022-49687)

  - 已解決 Linux 核心中的下列弱點：scsi: libsas: Fix use-after-free bug in smp_execute_task_sg() When executing SMP task failed, the smp_execute_task_sg() calls del_timer() to delete slow_task->timer. However, if the timer handler sas_task_internal_timedout() is running, the del_timer() in smp_execute_task_sg() will not stop it and a UAF will happen. The process is shown below:
    (thread 1) | (thread 2) smp_execute_task_sg() | sas_task_internal_timedout() ... | del_timer() | ... | ...
    sas_free_task(task) | kfree(task->slow_task) //FREE| | task->slow_task->... //USE Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure the timer handler have finished before the task->slow_task is deallocated. (CVE-2022-50422)

  - 已解決 Linux 核心中的下列弱點：xhci: Remove device endpoints from bandwidth list when freeing the device Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge) (CVE-2022-50470)

  - 已解決 Linux 核心中的下列弱點：mmc: via-sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues:
    1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path which will call mmc_free_host(). (CVE-2022-50846)

  - 已解決 Linux 核心中的下列弱點：media: uvcvideo: Fix memory leak in uvc_gpio_parse Previously the unit buffer was allocated before checking the IRQ for privacy GPIO. In case of error, the unit buffer was leaked. Allocate the unit buffer after the IRQ to avoid it. Addresses-Coverity-ID: 1474639 (Resource leak) (CVE-2022-50882)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

CentOS Linux 8.5 主機已安裝的套件會受到 TuxCare CENTOS8.5：CLSA-2026：1773047921 公告中提及的多個弱點影響。

  - 已解決 Linux 核心中的下列弱點：asix: fix uninit-value in asix_mdio_read() asix_read_cmd() may read less than sizeof(smsr) bytes and in this case smsr will be uninitialized. Fail log: BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 BUG: KMSAN: uninit-value in asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 (CVE-2021-47101)

  - 已解決 Linux 核心中的下列弱點：net/mlx5e: Avoid field-overflowing memcpy() In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing:
    #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes
    */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */} insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4
    */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. pahole shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. objdump -d shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). (CVE-2022-48744)

  - 已解決 Linux 核心中的下列弱點：NFSD: Fix the behavior of READ near OFFSET_MAX Dan Aloni reports: > Due to commit 8cfb9015280d (NFS: Always provide aligned buffers to > the RPC read layers) on the client, a read of 0xfff is aligned up > to server rsize of 0x1000. > > As a result, in a test where the server has a file of size > 0x7fffffffffffffff, and the client tries to read from the offset > 0x7ffffffffffff000, the read causes loff_t overflow in the server > and it returns an NFS code of EINVAL to the client. The client as > a result indefinitely retries the request. The Linux NFS client does not handle NFS?ERR_INVAL, even though all NFS specifications permit servers to return that status code for a READ. Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed and return a short result. Set the EOF flag in the result to prevent the client from retrying the READ request. This behavior appears to be consistent with Solaris NFS servers. Note that NFSv3 and NFSv4 use u64 offset values on the wire. These must be converted to loff_t internally before use -- an implicit type cast is not adequate for this purpose. Otherwise VFS checks against sb->s_maxbytes do not work properly.
    (CVE-2022-48827)

  - 已解決 Linux 核心中的下列弱點：virtio_net: fix xdp_rxq_info bug after suspend/resume The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac
    __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up. (CVE-2022-49687)

  - 已解決 Linux 核心中的下列弱點：ceph: avoid putting the realm twice when decoding snaps fails When decoding the snaps fails it maybe leaving the 'first_realm' and 'realm' pointing to the same snaprealm memory. And then it'll put it twice and could cause random use-after-free, BUG_ON, etc issues. (CVE-2022-49770)

請注意，Nessus 並未測試這些問題，而是僅依據應用程式自我報告的版本號碼作出判斷。

ID	名稱	產品	系列	已發布	已更新	嚴重性
361020	CentOS Linux 8.4 [TuxCare] 安全性更新：bpftool / kernel / kernel-core / kernel-cross-headers / etc多個弱點（CENTOS8.4：CLSA-2026：1773048865）	Nessus	CentOS Local Security Checks	2026/10/1	2026/10/1	high
269601	Linux Distros 未修補的弱點：CVE-2023-53471	Nessus	Misc.	2025/10/8	2026/9/30	high
362121	AlmaLinux 9.2 [TuxCare] 安全性更新：bpftool / kernel / kernel-abi-stablelists / kernel-core / etc 多個弱點（ALMALINUX9.2：CLSA-2026：1773139548）	Nessus	Alma Linux Local Security Checks	2026/10/1	2026/10/1	high
352370	CentOS Linux 8.5 [TuxCare] 安全性更新：bpftool / kernel / kernel-core / kernel-cross-headers / etc 多個弱點（CENTOS8.5：CLSA-2026：1773047921）	Nessus	CentOS Local Security Checks	2026/9/30	2026/9/30	high

偵測

搜尋 Plugin

high

high

high

high